Field Engineer by   ITT Corporation

Electrical Engineer IV
The Electrical Engineer IV will be responsible for performing the following tasks:
• Satcom Systems Engineering
• Customer Design Reviews
• Systems testing and installation
• Systems analysis
• RF, Analog and Digital Circuit design
• Servo Control Loop Analysis
• Field support
In order to be successful in this role, you must have:
• Detailed knowledge of analog and digital circuit designs.
• Knowledgeable in Modern Controls theory
• Knowledgeable of RF designs through 2GHz or direct SATCOM experience is a plus
• Excellent communication skills due to close contact with the customer, Management, Engineering team, and manufacturing.
• Domestic and international travel will be required to support field installations and fielded systems.
• Bachelor of Science in Electrical Engineering required or equivalent related degree.
• Master of Science in Electrical Engineering preferred...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Earth Station Systems Engineer
- Develop and manage requirements, which include the identification and definition, integration and priortization, documentation, allocation and flow-down of system and subsystem level and regulatory requirements
- Plan, organize and monitor information that affects system design (e.g., customer needs, regulatory requirements, performance, cost constraints, enterprise capability and capacity)
- Synthesize, integrate and manage design interfaces, which include formulating, synthesizing and assessing alternative system architectures consistent with requirements and product strategy
- Verify design compliance and ensure safety and quality by conducting and documenting test procedures, demonstrations, simulations, analyses or inspections
- Perform the RF system tests as defined in the test plans and procedures
- Participate in team meetings and program reviews
- Manage system engineering related costs, schedules, interfaces, performance and risk
- Troposcatter systems design and development
Required experience: BSEE +10 years experience or MSEE +5 years experience in RF, antenna, troposcatter and satellite systems engineering...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Electrical Engineer IV
In this role as an Electrical Engineer IV, you will have the opportunity to apply a variety of engineering skills supporting product and system solutions for the Satcom and Optical Telescope markets. The person fulfilling this position will lead development of Satcom System solutions, creating RF/digital/analog printed circuit board designs, creating unit designs, and evaluating performance via Matlab/Simulink simulations of complex dynamic structures. The desired candidate shall have a Bachelor of Science in Electrical Engineering or a related field along with a minimum of 6 to 8 years of Satellite Communication or RF digital/analog design experience.
The Electrical Engineer IV will be responsible for performing the following tasks:
• Satcom Systems Engineering
• Customer Design Reviews
• Systems testing and installation
• Systems analysis
• RF, Analog and Digital Circuit design
• Servo Control Loop Analysis
• Field support
In order to be successful in this role, you must have:
• Detailed knowledge of analog and digital circuit designs.
• Knowledgeable in Modern Controls theory
• Knowledgeable of RF designs through 2GHz or direct SATCOM experience is a plus
• Excellent communication skills due to close contact with the customer, Management, Engineering team, and manufacturing.
• Domestic and international travel will be required to support field installations and fielded systems.
• Bachelor of Science in Electrical Engineering required or equivalent related degree.
• Master of Science in Electrical Engineering preferred...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
4 Year degree or relative exp. in RF Electronics & must possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Digital Hardware/Firmware Engineer
A technology leader in Wideband RF Power Amplifier Design seeks a Digital Hardware/Firmware Engineer. The desired candidate will have the ability to design and program micro-controller based subsystems for controlling RF Power Amplifiers. The individual should be familiar with designing using both parallel and serial A/D’s and DAC’s and knowledge of RS-232 & RS-485 communications is a must. The selected individual will have experience with VB and HC912 assembly. Experience in firmware development with Freescale (Motorola) 8 and 16 bit micro controllers along with military equipment design experience is a plus. The desired candidate will have the ability to interface with RF, Power and Mechanical engineers and to work with minimal supervision...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 RF/Network System Technician
Essential Functions:
• Performs assembly, calibration, and testing of tactical trailer equipment.
• Performs assembly, calibration and product inspection operations on integration related subcomponents.
• Performs set up and tests of RF networks, IP, and serial data networks.
• Identifies and reports material discrepancies to supervisor.
• Provides training in assembling, calibrating, setting up, testing and inspecting electronics related tactical trailer products.
• Performs site installations, repairs, testing and customer training.
• Performs performance, factory, and site acceptance testing.
• Performs other related duties as assigned by management.
• Efficient and courteous interaction with co-workers, representatives from other departments, customers and suppliers, as discussed above.
• High level of dependability with minimal direct supervision.
• Complies with Company and departmental policies, procedures and regulations.
• Maintains quality output and work safely while meeting department production requirements.
• Climbing and working from ladders and stairs.
• Working on top of antenna equipped news trucks and other similarly equipped vehicles or other platforms.
• Working around heavy materials undergoing lifting and moving operations.
• Working with and around power tools and machinery in motion.
• Working around exposed electrical components up to 480 Vac.
• Working around cutting, welding, chemical cleaning/finishing and painting operations.
• Performing assembly tasks in hard to reach and close-quarter areas...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Microwave Tune Technician / Engineer
Responsible for tuning and alignment of chip and wire technology based microwave and millimeter wave products done with custom test fixtures and utilizing state-of-the-art microwave test systems. Technician works with an integrated assembly that is already built and must be tested and tuned to a particular specification. This hardware contains various components like mixers, modulators, etc. They must be aligned, tested and tuned. To do this someone must be familiar with microwave RF technology and understand things like mismatch, linearity and flatness. They must be familiar with spectrum analyzers, power meters, microscopes, etc. Each unit takes about one day to properly test and tune. That unit is then joined to form a higher order assembly which is then tested by another group of technicians for a higher level of functionality...
Company Name:  Path Technologies, Inc.
Apply for this Position
 

SATCOM Field Network Engineer
Duties and Responsibilities:
Ensuring the maintenance, operation and performance of Ku and Ka-Band Mobile Terminals
Personnel selected will be assigned to various locations in CONUS and OCONUS supporting the SATCOM UHT and various SATCOM Terminal Trailer configurations.
Working with site personnel to:
Maintain satellite communication system availability above acceptable levels
Troubleshoot and resolve any identified circuit or equipment outages or degradation
Provide interim reports as necessary, based on particular site conditions and/or problems
Maintain the site (including electronics and office) in professional and clean manner
Core Requirements:
Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information
Must be willing to work in less than desirable conditions
Must be willing to deploy to SWA
Requires a valid U.S. driver’s license and the ability to obtain an international driver’s license
Four-plus years of strategic or tactical multi-channel satellite communications experience
Strong grasp of satellite communications operational theory
Must possess the knowledge to operate and configure the following equipment to include, but not limited to:
Antenna controller, satellite acquisition
HPA/TWT, LNA/LNB - Low Noise
Fiber/Coax/Ethernet Cable Work
FDMA/TDMA modems (satellite modems)
Up-converters, down-converters
ViaSat Linkway Modems
BS Degree in a specific engineering or related technical field (e.g. BSEE, BSCS) and a minimum of five (5) years of progressively more responsible and directly related field engineering support expertise, or have equivalent combination of education and exp. A minimum of seven (7) years of experience is preferred. Minimum of 4 - 10 year experience with military tactical communication systems, SATCOM network management, and digital communications systems planning a must. CCNA, CCNP desired. Experience with Promina and REDCOM IGX is also highly sought. 50% travel is possible.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Engineer
Knowledge and experience in using RF/Microwave simulation tools such as Microwave Office Suite or Agilent ADS. Experience in designing low power and high power RF circuits, up to 100-200 watts. Experience in matching different device technology such as Gan, LDMUS and Ga As FET. Experience in low-volume prototype developing and introducing design into high volume manufacturing. Experience in working effectively in a small team environment. Ability to communicate clearly at the engineering level. Team player is a must.
This position is with General Dynamics SATCOM Technologies, Inc.,(IDSI) which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
BSEE with minimum of 5 years of experience in designing RF circuitry.
Applicant must be capable of obtaining a US Security Clearance...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Assembler
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus.
Applicant must be capable of obtaining a US Security Clearance...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

ATE Test Development Engineer
This individual will be responsible for designing, procuring and integrating final test solutions for the purpose of testing RF, analog and digital subassemblies as well as top level power amplifier assemblies. This ATE Test Development Engineer will design and debug test interface hardware using RF and analog test equipment specific to the customer’s application. This individual will work closely with the engineering and production teams and will generate test plans to ensure maximum outgoing quality levels to customer applications. This individual will also be expected to develop, design and debug test software for the purpose of automating final test hardware. Experience in using and controlling various test equipments, such as network analyzer, power meter, spectrum analyzer, power supplies, signal generators and oscilloscopes is essential. This position works closely with Test Technicians to fabricate designed test solutions. The ATE Test Development Engineer will design and develop RF test fixturing solutions for various subassemblies and final top level test. This individual will generate all test solution documentation for manufacturing release and release cost-effective production test solutions into high volume production.
This position is with General Dynamics SATCOM Technologies, Inc.,(IDSI) which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
Bachelor’s degree in Engineering or Computer Science preferable
3+ Years of RF/Microwave Test Design experience
3+ Years Test Software Design using Visual Basic
Applicant must be capable of obtaining a US Security Clearance...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Engineering Technician
Looking for an engineering technician to support our various engineering development activities and prototype builds. Ability to take instructions from senior engineers, and capture parametric data in support of our prototyping design activities is a must. Looking for a great team player with good communications skills. Knowledge and working experience with RF, analog and digital circuitry is highly desirable. Knowledge of various RF test equipments, such as vector network analyzer, spectrum analyzer, power meter, noise figure meter, signal generators is a must.
Applicant must be capable of obtaining a US Security Clearance...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Engineer
BS Degree in a technical field related to systems engineering + 7 years demonstrated results, or equivalent experience, advanced degree recommended.
Senior technical contributor with demonstrated design skills; is assigned difficult technical problems within domain of expertise.
Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that
acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications.
Plans and executes significant project tasks or small projects.
Ability to lead & to take on technologically challenging tasks.
Displays good depth of knowledge.
Begins to provide mentoring to less experienced engineers.
Owns project interdependencies.
Works to optimize tasks and resources in support of multiple project(s).
Begins to support proposals.
Fully understands process applications within domain of expertise.
Leads small continuous process improvement efforts.
Extended contact with senior levels within other engineering depts.
Required to work with other functional areas.
Occasional contact with senior management both internal and external.
Routine contact/travel to customers and vendors.
Occasional contact with business development functions.
Aware of other's capabilities and able to leverage them in a team environment.
Demonstrated pattern of continuous learning. Provides clear direction for less experienced engineers.
Skilled at developing and integrating groundbreaking ideas.
Integrates complex strategies with mitigation plans.
Meets goals and actively seeks opportunities to enhance business area.
Demonstrates Leadership as follows:
Able to solve multiple technical problems across multiple development phases.
Embraces risk & defines reasonable trade space from which the team can operate.
Demonstrates clarity and out-of-the-box thinking in analyzing problems that affect the team.
Experience with large scale satellite communication systems. Experience with antenna and RF systems desired.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Applicant must be a US Citizen.
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Engineer
Radio Products seeks a highly experienced RF Engineer to provide technical leadership in the detailed design of the RF front end for an embedded, battery powered software defined radio. This engineer will also advise on the maintenance or expansion of RF capabilities of existing products. This engineer's responsibilities will include: technology planning; developing technical baselines and providing ROM cost and schedule estimates for proposed RF projects; ensuring RF requirements are implementable; leading the detailed design; verifying the RF design satisfies requirements; mentoring less senior engineers in the application of advanced technologies, techniques and processes.This position requires a BSEE, advanced degree preferred, and the knowledge and wisdom accumulated over at least 8 years of experience designing RF front end elements in radios covering the spectrum from 2 MHz to 3 GHz. This position requires experience modeling the performance of linear and non-linear RF circuits in a tool such as ADS, and equal experience in the lab measuring circuit performance to specification. This position also requires infrequent travel. Design experience in one or more of the following areas is an advantage: military waveforms such as EPLARS, SINCGARS, UHF SatCom or WNW, SRW, LPI/LPD communication; size, weight and power-challenged radios (e.g. hand held or man-pack); multi-octave PAs; wide-band, multi-mode and/or adaptable antennas. Alternatively, experience in SIGINT and Electronic Warfare would be desirable.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Satellite Communications Integration Technician
Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus.
Applicant must be capable of obtaining a US Security Clearance.
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Assembler
Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus.
Applicant must be capable of obtaining a US Security Clearance.
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

ATE Test Development Engineer
This individual will be responsible for designing, procuring and integrating final test solutions for the purpose of testing RF, analog and digital subassemblies as well as top level power amplifier assemblies. This ATE Test Development Engineer will design and debug test interface hardware using RF and analog test equipment specific to the customer’s application. This individual will work closely with the engineering and production teams and will generate test plans to ensure maximum outgoing quality levels to customer applications. This individual will also be expected to develop, design and debug test software for the purpose of automating final test hardware. Experience in using and controlling various test equipments, such as network analyzer, power meter, spectrum analyzer, power supplies, signal generators and oscilloscopes is essential. This position works closely with Test Technicians to fabricate designed test solutions. The ATE Test Development Engineer will design and develop RF test fixturing solutions for various subassemblies and final top level test. This individual will generate all test solution documentation for manufacturing release and release cost-effective production test solutions into high volume production.
This position is with General Dynamics SATCOM Technologies, Inc.,(IDSI) which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
EOE/AA M/F/D/V
Bachelor’s degree in Engineering or Computer Science preferable
3+ Years of RF/Microwave Test Design experience
3+ Years Test Software Design using Visual Basic
Applicant must be capable of obtaining a US Security Clearance
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

ELECTRICAL ENGINEER IV
The desired candidate shall have the following skills:
• SATCOM systems knowledge, including link budget calculations, Satcom parabolic antenna designs, antenna feed designs, and antenna testing techniques.
• Familiar with various manufacturers’ equipment for satellite communications, including modems, LNA’s, HPA’s, routers, switches, up converters, down converters, etc.
• RF System design providing built in test capability and signal distribution while maintaining system G/T.
• Capable of managing technical and cost functions on government and commercial contracts
• Able to develop cost and technical proposals in response to customer specifications and Statement of Works (SOW).
• Bachelor of Science in Electrical Engineering
• Prefer Master of Science in Electrical Engineering
Candidate must be able to pass Drug Testing and Background checks. U.S. Citizenship required
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location.
We offer a competitive benefit package. Compensation is commensurate with experience. If you are an individual who has a high interest in working in an exciting and growth-oriented environment, please apply online at www.gdsatcom.com.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
Associate Degree or relative exp. in RF Electronics & possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Assembler
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

UHF F/O Satellite Engineer
The successful candidate will provide engineering support for on-orbit satellites and ground station equipment This includes:
- Daily satellite health checks
- Satellite commanding
- Real-time subsystems and orbit analysis
- Data trending
- Launch and transfer orbit operations
- Ground systems development and testing
- Develop and maintain mission unique software to support satellite operations
Travel to customers/suppliers may be required.
Assumes leadership role in team projects and interacts well with others to produce positive group results.
Mentors junior engineers.BS in technical field with 3 years of satellite engineering experience specific to the UHF F/O program or the Boeing 601 bus is required.
Other specific knowledge should include:
Proven knowledge of satellite systems and the ground systems used to monitor and control them.
Demonstrated abilities applicable to a wide range of duties related to satellite commanding, telemetry data analysis, mission planning, and anomaly analysis & resolution.
Applicant must be capable of obtaining a US Security Clearance.
Applicant must be a US Citizen.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Assembler
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2156 RF Technician I
To carry out the assembly and proof of performance tests of standard feed system products and associated components.
• Perform mechanical assembly of feed components.
• Perform fundamental RF test under guidance of engineering.
• Prepare measurement data package for final processing by lab supervisor
• Ability to work from drawings and procedures.
• Perform other related duties as assigned by management.
• Work to given schedules and complete task in a timely manner.
• Technical writing related to reporting lab and test activities
• Knowledge of use of a computer for word processing, spread sheet work
• Assist other departments
• Maintain assembly tools and test equipment
• Compliance with corporate office and safety policies.
• Compliance with corporate security and proprietary property policies.
• Compliance with engineering design and drafting standards.
• Compliance with RF departmental policies and procedures.
• Follows direction from Production Manager (immediate supervisor) and upper management.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
• High School diploma
• Reasonable experience in mechanical and electrical assembly and repair.
• Must have good mechanical aptitude.
• Must have a working knowledge of electrical circuits.
• Must have basic understanding of how an RF feed system functions.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Electrical Engineer III
General Dynamics SATCOM Technologies is looking for an experienced Electrical Engineer III to work with product teams to provide earth station solutions to satellite communication networks. This position presents the opportunity to apply technical skills to a broad base of applications. This is a low volume engineering/production environment that will present a range of challenges and opportunities to the right individual. The desired candidate shall have a BS/MSEE with a minimum of 4 to 6 years Satellite Communications or RF design experience.
In this position, the Electrical Engineer II will be responsible for marketing, engineering, product development and program management activities associated with the transportable control system product line. The selected candidate will utilize their management skills by providing management of group activities in support of customers and development efforts. Performs personnel management including: day to day assignments, yearly reviews, training, and mentoring. Must be capable of motivating staff and creating opportunities for their staff to learn and grow in all aspects of the business. The Engineer is responsible for developing marketing leads, engineering solutions to satisfy the customer’s requirements, creating cost and technical proposals in response to RFQ’s (government and commercial), and working with product engineers in the implementation of the program requirements.
The desired candidate shall have the following skills:
• SATCOM systems knowledge, including link budget calculations, SATCOM parabolic antenna designs, antenna feed designs, and antenna testing techniques.
• Familiar with various manufacturers’ equipment for satellite communications, including modems, LNA’s, HPA’s, routers, switches, up converters, down converters, etc.
• RF System design providing built in test capability and signal distribution while maintaining system G/T.
• Capable of managing technical and cost functions on government and commercial contracts
• Able to develop cost and technical proposals in response to customer specifications and Statement of Works (SOW).
You must have a Bachelors or Master degree in Electrical Engineering. We prefer a Master’s of Science in Electrical Engineering
General Dynamics SATCOM Technologies is an Equal Opportunity Employer/Affirmative Action mployer. We welcome and encourage diversity in our workforce. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. You must be a U.S. citizen in order to work for our company and be able to obtain a US passport. If you are interested in applying for this position, please go to http://www.gdsatcom.com. Go to "Career Opportunities" and attach your resume to requisition N08-7811.
EOE/AA M/F/D/V
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Microwave Component Design Engineer
-Microwave design engineer specializing in active component design through 40Ghz.
-Skills: Component-level design of microwave solid-state power amplifiers and block converters operating through 40Ghz using state of the art technologies. Strong background and skills in active MIC component design, development, and manufacturing
-5 to 10 years experience in the design and development of active microwave components to include low-noise and solid state power amplifiers, frequency converters, and associated components
-Strong background in microwave component manufacturing & test processes.
-Proven track record of successful product development.
-Able to work well in a fast-paced, team-oriented design, development, and manufacturing organization.
-BSEE minimum (MSEE preferred).
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

PCB Designer
The responsibilities of this position will include, but are not limited to, Schematics in Orcad, DX Designer or equivalent, PCB layouts in AutoCAD, Altium (Protel), PADS or equivalent. Experience in chassis and RF shielding designs is highly desirable. Experience in creating both top and low level assembly bills of materials, the ability to develop complete detailed drawings and to assist in incorporating Engineering Change Notices is a plus. This individual must have the ability to work closely with engineering design personnel and to complete assignments on time. The selected candidate will have experience in both AutoCAD and Solid Works or equivalent programs. The individual must have great communications skills, must be able to multi-task and must be willing to work demanding schedules.
• 5-10 Years of directly related experience
• Board Layout, Schematic Capture
• Minimum of Associates degree in drafting/electronics technology or equivalent experience.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

SATCOM Field Network Eng. Ft Campbell, KY
Duties and Responsibilities:
Ensuring the maintenance, operation and performance of Ku and Ka-Band Mobile Terminals
Personnel selected will be assigned to various locations in CONUS and OCONUS supporting the SATCOM UHT and various SATCOM Terminal Trailer configurations.
Working with site personnel to:
Maintain satellite communication system availability above acceptable levels
Troubleshoot and resolve any identified circuit or equipment outages or degradation
Provide interim reports as necessary, based on particular site conditions and/or problems
Maintain the site (including electronics and office) in professional and clean manner
Core Requirements:
Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information
Must be willing to work in less than desirable conditions
Must be willing to deploy to SWA
Requires a valid U.S. driver’s license and the ability to obtain an international driver’s license
Four-plus years of strategic or tactical multi-channel satellite communications experience
Strong grasp of satellite communications operational theory
Must possess the knowledge to operate and configure the following equipment to include, but not limited to:
Antenna controller, satellite acquisition
HPA/TWT, LNA/LNB - Low Noise
Fiber/Coax/Ethernet Cable Work
FDMA/TDMA modems (satellite modems)
Up-converters, down-converters
ViaSat Linkway Modems
Typically requires Bachelor's Degree and minimum 2 years experience or Master's Degree and no experience Minimum of 4 - 10 year experience with military tactical communication systems, SATCOM network management, and digital communications systems planning a must. CCNA, CCNP desired. Experience with Promina and REDCOM IGX is also highly sought. 50% travel is possible.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance. 
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

SATCOM Field Network Engineer
Duties and Responsibilities:
Ensuring the maintenance, operation and performance of Ku and Ka-Band Mobile Terminals
Personnel selected will be assigned to various locations in CONUS and OCONUS supporting the SATCOM UHT and various SATCOM Terminal Trailer configurations.
Working with site personnel to:
Maintain satellite communication system availability above acceptable levels
Troubleshoot and resolve any identified circuit or equipment outages or degradation
Provide interim reports as necessary, based on particular site conditions and/or problems
Maintain the site (including electronics and office) in professional and clean manner
Core Requirements:
Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information
Must be willing to work in less than desirable conditions
Must be willing to deploy to SWA
Requires a valid U.S. driver’s license and the ability to obtain an international driver’s license
Four-plus years of strategic or tactical multi-channel satellite communications experience
Strong grasp of satellite communications operational theory
Must possess the knowledge to operate and configure the following equipment to include, but not limited to:
Antenna controller, satellite acquisition
HPA/TWT, LNA/LNB - Low Noise
Fiber/Coax/Ethernet Cable Work
FDMA/TDMA modems (satellite modems)
Up-converters, down-converters
ViaSat Linkway Modems
Typically requires Bachelor's Degree and minimum 2 years experience or Master's Degree and no experience Minimum of 4 - 10 year experience with military tactical communication systems, SATCOM network management, and digital communications systems planning a must. CCNA, CCNP desired. Experience with Promina and REDCOM IGX is also highly sought. 50% travel is possible.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Embedded Software Defined Radio Engineer
The candidate is responsible for embedded SW development for a Software Defined Radio (SDR) and must be able to complete all phases of the software development life cycle including requirements, design, coding, integration, testing, documentation and peer reviews. The individual should have an understanding of processes consistent with managed software development and configuration management (CM) tools (i.e. ClearCase, ClearQuest). The candidate is expected to work in a team environment as well as independently and demonstrate quick comprehension of technical concepts coupled with effective written and verbal communication skills. It is desirable that the candidate has good analytical/problem solving skills and the ability to troubleshoot problems as they occur throughout the SW development life cycle. This position requires a BS in CpE/EE or equivalent experience with 3+ years of experience. Advanced dregrees a plus. Employee should possess the following: - Experience with RTOS (VxWorks), - Experience with the Visual C++ environment, - Proficient programming experience in C language and have experience in OO design (UML and CORBA experience a plus), - Ability to use lab equipment (emulators, O-scopes, logic analyzers, comm analyzers), - RF/Communications domain experience a plus, - Knowledge of software process and SEI/CMMI levels.
Must communicate well and work with several different engineering functional areas. Knowledge of crypto equipment internals is a plus, - Experience with the Rational suite of software tools a plus. - Experience with military waveforms a plus.
Employee must be a U.S citizen, and will be required to apply for a DOD Secret clearance and receive a COMSEC briefing.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Applicant must be a US Citizen.
Applicant must be able to pass an extended background investigation (EBI) for this position.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Senior Systems Engineer
A higher or lower grade may be established based upon qualifications and experience. ** Performs technical planning, system integration, verification and validation, cost and risk, and supportability and effectiveness analyses for total systems. Analyses are performed at all levels of total system product to include: concept, design, fabrication, test, installation, operation, maintenance and disposal. Ensures the logical and systematic conversion of customer or product requirements into total systems solutions that acknowledge technical, schedule, and cost constraints. Performs functional analysis, timeline analysis, detail trade studies, requirements allocation and interface definition studies to translate customer requirements into hardware and software specifications. Performs detailed design and test of software, electrical or mechanical subsystems. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application.BS Degree in a technical field related to systems engineering, 5+ years of demonstrated results, or equivalent experience required; software and / or network engineering experience is required, as well as demonstrated mastery of practical systems engineering application that is typically acquired in two or more years of directly related experience.
The candidate must:
• Possess a solid understanding of Windows and/or Linux operating system environments from both an installation, configuration and operation perspective. A working knowledge of MODL based design a plus.
• Understand and have experience with computer networking concepts and equipment such as routers, switches, firewalls and intrusion detection systems.
• Demonstrated working knowledge of military communication systems interfaces (BOWMAN Infrastructure a plus).
• Have a working knowledge of communications equipment (i.e., radios) and comm. interfaces.
• Have a cursory understanding of RF signal propagation and its limitations.
• Have a working knowledge of low-level network protocols (e.g. IPv4, IPv6, TCP, UDP, ICMP, Ethernet, and 802.11).
• Demonstrate good communication skills, written and spoken and be capable of presenting technical concepts to audiences of various technical abilities.
• Performs functional tests of software.
• Researches and analyzes the state of the art of computer exploitation technologies and techniques.
• Plans and executes project tasks. Additionally experience in the following areas/domains would be beneficial: • Databases (e.g. SQL Server, Oracle), web servers (Apache, IIS), mail servers, and voice over IP (VOIP).
• Source Code Analysis, Heap and Stack Overflow Exploitation, and Network Protocol Security Analysis. • Information Assurance, Penetration testing, or vulnerability assessments. • VPN environments, GRE and IPSec.
• Software development
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

ONIR (Overhead Non-imaging Infrared) Scientist
ONIR (Overhead Non-imaging Infrared) Scientist
What You'll Do
Work in a research and development environment, developing new exploitation algorithms for ONIR datasets
What You'll Need
Bachelors degree in Physics or Engineering is strongly preferred, with 2 or more years of related experience. Advanced degree is preferred.
Knowledge of multi-spectral and hyper-spectral data processing
Experience with ENVI toolset and IDL programming language
Must have ACTIVE TS/SCI clearance
In addition to the typical educational and experience requirements, a demonstrated capability to adequately perform the essential functions and responsibilities of the position and exhibit the skills and competencies of the grade level will be considered. Each higher level degree, i.e. Bachelor's or Master´s degree may substitute for two years of experience. Related experience may be considered in lieu of education.
Company Name:  Ball Aerospace & Technologies Corp.
Apply for this Position
 

Technical Instructor (Trainer)
Present formal instruction to soldiers at the U.S. Army Signal School to qualify them in the duties required to perform installation, operation, and maintenance, supervision and management of Multi-Channel Transmission Systems Equipment and associated Peripheral devices. Conduct structured training courses using Tri-Tac Single Shelter Switch assemblages, Satellite Systems, TROPO (AN/TRC-170, HCLOS, Line of Site.(LOS) transmission assemblages, and laboratory training aids, training simulator devices, CBT technology, and associated training materials in support of the Transmission Systems Training. Maintain current academic and counseling records on all students enrolled in the course creating an audit trail in support of creating accepted minimum academic standards. Prepare and furnish required documents (attendance rosters, exam scores and deficiency reports) on student’s progress along with current course status to the Student Administration Section for further dissemination and processing. Test continuously for accuracy in lesson material, student guides and technical manuals, providing corrective input for a product that is consistent with contract specifications. Recommend improvements in course material and training equipment; participate in developing new course material when technology changes or course material changes. Enter official published modifications to technical manuals and update company prepared student guides to reflect changes, keeping those materials available to the students as the most current and in concurrence with information presented during the conference periods.
A minimum of one year in formal course presentation is required and hands-on experience in the operation and maintenance of Multi-Channel Transmission Systems.Typically requires minimum of 1 - 2 years experience. ITC Certification highly sought. Associates degree in a technical or related field of study, or equivalent work knowledge and experience with Tactical Single Shelter Switch assemblages, Satellite Systems, TROPO (AN/TRC-170, HCLOS, Line of Site.(LOS) transmission assemblages. network planning, implementation or management is desired but not required. 4-6 years experience in working with military tactical networks is desired but not required.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly-owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
4 Year degree or relative exp. in RF Electronics & must possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Systems Engineer 5/6
This individual will perform and lead military operational effectiveness analyses for weapon systems and aircraft. Analyses will address weapon system capabilities, effects, and requirements for a range of engagement, mission, campaign, and system-of-system level applications. The individual will be expected to plan, lead, and conduct such analyses given general direction. The individual will be responsible for direct interface with design personnel and government customers in order to identify and shape the requirements of future systems. Additionally, the individual will develop operational analysis training materials, operations analysis tools and processes, and train junior analysts in these areas as needed. Extensive experience in the planning, leadership, and performance of organized military operational analyses is required, including first-hand knowledge of analysis in the areas of campaign/force-structure effectiveness, mission/tactics effectiveness, air-to-air engagements, surface-to-air engagements, platform detectability (Infrared (IR) and Radar Frequency (RF)), countermeasures, and weapons lethality. The individual should be familiar with large-scale/strategic as well as tactical military operational concepts and interactions. Demonstrated knowledge of the operations of current military aircraft and weapon systems is required. Expertise in one or more widely used operations analysis tool is required.
Competencies:
1) Expert knowledge in defining new areas for advanced mathematical research, answering advanced Company needs. Represents the Company nationally, internationally and enterprise wide. Ability to evaluate complex vehicles and systems from a multitude of perspectives including the ability to apply figures of merit and integrated optimization tools.
2) Perform multi-disciplinary trade studies to evaluate configuration alternatives for functional and spatial integration. Advanced knowledge of techniques to help identify a customer's organization, capabilities, practices, support resources, preferences, problems, and other constraints in order to provide effective product support and technical issue resolution. Skills and ability to collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources at the enterprise level.
3) Expert knowledge of operational effectiveness analysis methodologies (e.g. mission and system effectiveness analysis) and tools (e.g., mission simulations; measure of effectiveness; human in the loop simulators, test facilities, and operational evaluations).
Advanced, expert level of understanding and knowledge of trade study process (e.g., benchmarking, best value).
Education Requirements:
Level 5 - Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry and typically 14 to 19 years experience in an engineering classification or either a Master's degree with 12 to 17 years experience or a PhD degree with 9 to 14 years experience in an engineering classification. ABET is the preferred, although not required, accreditation standard. Level 6 - Bachelor, Master or Doctorate of Science degree from an accredited course of study in engineering, computer science, mathematics, physics or chemistry and typically 20 years experience in an engineering classification or either a Master's degree with 18 years' experience or a PhD degree with a minimum of 15 years experience in an engineering classification. ABET is the preferred, although not required, accreditation standard...
Company Name: The Boeing Company
Apply for this Position
 

SR. SLIP RING ENGINEER
 SENIOR SLIP RING ENGINEER
This is an outstanding opportunity for a "hands-on" Senior Engineer to establish a relatively new SLIP RING product line for use in Military and Commercial products.
Client is currently a world leader in passive microwave components and is rapidly expanding.
The selected candidate should have:
1. A Bachelor's Degree
2. Five years experience in the SLIP RING field is required
3. GOLD WIRE technology experience is required
4. Familiarity with Military Specifications is a plus
As the leader in the design and manufacture of microwave rotary joints and rotating subsystems, we offer an excellent benefits package to include Health, Dental, 401K, Tuition Reimbursement and a Free Gym Membership...
Company Name: ITT Corporation
Apply for this Position
 

Electronic Engineering Associate
Electronic technician required to support the Joint Tactical Radio System (JTRS) Handheld, Manpack, and Small Form factor (HMS) Development Program as well as several smaller programs within the Advanced Communications Systems business area. The JTRS HMS program is the largest and most complex of all of the JTRS Clusters that will incorporate Software-Defined Radio (SDR) technology into small form factors. The HMS program will require advanced technology and process in order to meet JTRS requirements within size, weight, power, and cost constraint platforms. As a member of a product development team for a miniature low-cost software-defined radio, the successful candidate will build, troubleshoot, and test modules containing analog, RF and digital circuitry as well as support design reviews by collecting and organizing performance data.
Candidate must have B.E.E.T. and a minimum of 20 years experience in constructing and testing RF and digital breadboards. The candidate must have experience with common laboratory equipment such as spectrum analyzers, oscilloscopes, logic analyzers and a graphical programming language for data acquisition and instrumentation control. LabVIEW is preferred. The candidate must also have shown demonstrated results in working independently to troubleshooting analog, RF and digital circuits. In addition, experience making RF measurements using a probe station and the ability to evaluate and re-work miniaturized RF modules would be highly desirable.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

RF Design Engineer
In this position, you will be the technical lead for teams of engineers (antenna, RF, mechanical, electronics, and software) working on military and space programs. Your knowledge of requirements tracking and flow down will assist the Program Manager with all technical aspects of the program.
Requirements:
MS in Engineering required.
10+ years of relevant experience.
Expertise in RF or Electronics Design for Communications or RADAR systems.
System Architectural Design Experience.
Experience Writing Specifications.
Experience developing and running system simulations to support Design Trades.
Risk Management.
Requirements Management.
Experience with DOORS, ARM, Omnify, and MATLAB a plus.
This position requires US citizenship and the ability to obtain a security clearance. An active SECRET or TS security clearance is preferred.
Company Name:  EMS Technologies, Inc.
Apply for this Position
 

SR. Manufacturing Engineer
Senior Manufacturing Engineer
Reports To: Vice-President of Operations
Position Responsibilities
Develop and document time standards / processes for all manufactured products including Instruments, Filters, Components, EAS and Sub-Systems
Act as production liaison to Product Engineering on planning and transitional issues related to emerging and developing products in terms of product structure, RoHs compliance, documentation, identification of tools and fixtures , prototype builds, and other issues
Develop, document, and catalog assembly / test fixtures as required for all manufactured products
Review and approve all Engineering /ISO documents released to various Production departments
Review, approve and communicate ECN’s on behalf of various production departments,
Value Engineering
Ongoing evaluation of existing processes and fixtures for efficiency improvements,
Ongoing review of product structure and material content for cost savings and SKU reduction
Review all documentation packages, products, practices, and processes for manufacturing and cost improvement opportunities.
Participate in MRB meetings as required
Work with Purchasing in resolving technical issues with Contract Manufacturers as required
Evaluate and recommend required (production) capital equipment.
Assume responsibility for RoHs compliance and maintenance for released products and conversion of non-RoHs products.
All other special projects and duties as required by management.
Requirements
At least 5 years progressive experience in manufacturing support, process and fixture design, CAD, problem solving, and product documentation practices in an RF environment.
Excellent written and oral communications skills
Ability to utilize software applications such as Excel, Word, Project, and Autocad . Familiarity with Eagleware and other design suites is a plus
An Engineering Degree is desirable but not required if life experience is adequate
Demonstrated mechanical and RF aptitude
Training and /or experience in designing for product manufacturing
Ability to work cooperatively with all employees and management.
Working knowledge of MRP and Inventory Control practices
Company Name:  Defense Talent Network Exe Search  
Apply for this Position
 

Manufacturing Engineer
Responsible for providing technical support to the manufacturing production lines building Traveling Wave Tube Amplifier (TWTA), Klystron Power Amplifier (KPA) and Solid State Power Amplifier (SSPA) products. Support will include specifying state of the art manufacturing processes, optimizing existing manufacturing processes, optimizing existing mechanical designs, specifying new mechanical designs, creating bills of materials for new products, generating ECOs for new and existing products, root cause analysis of production issues and implementation of corrective action.
Skills/Training Required:
Design and introduction of derivative products into production
Document mechanical design modifications to existing products.
Day to day disposition of discrepant material
Hands on troubleshooting of manufacturing issues
Creating rework instructions
Addressing Engineering change requests
Writing Engineering Change orders
Implementing lead free solder into the manufacturing process
Specifying and testing packaging material
Training operators on the operation of the vibration system
Testing new and existing products for vibration
Specifying high voltage potting materials and processes
Specifying and evaluating fan and blower assemblie.
Perform mechanical design and build production tooling...
Company Name: Xicom Technology
Apply for this Position
 

Sr. Manufacturing Engineer
Candidate should have a BSME or related degree with 2+yrs DOD or Aerospace exp.
Lean Six Sigma, ISO, FAR standards .
Must be able to prepare work orders detailed manufacturing plans/prod. drawings for DOD Aircraft Structural platforms.
Prioritize tool design, methods, and material procurement.
Skills in CAITV, Autocad and basic Catia usage.
Capabilities in SPC, process mapping,sketch concept, Geometric dimensioning ,tolerance,& root cause analysis.
Coordinate with Process, Quality and upper management.
US citizen, well spoken, Client contact, 10% travel.
Co. prefers Contract to Hire. Will consider straight perm interview. 65K-75K perks. DOE
Full benefits, Relocation available.
Company Name: Confidential
Apply for this Position
 

Manufacturing Test Engineer
Responsible for providing Manufacturing with technical support in: RF Test, Power Supply Test, System Test, and New part/product introduction. Provide technical direction to the test areas to troubleshoot and repair product. Improve the manufacturing test and screening processes that result in cost reductions and
increased throughput, and higher reliability. Create and maintain test procedures and specifications. Evaluate microwave components and suppliers. Create Bill of material (BOM) and ECO generation. Failure analysis of various assemblies and components. Provide day to day support to the production lines. Assist Engineering as needed with new product introduction into Manufacturing.
Skills/Training Required:
· Candidate must have experience using or manufacturing high power microwave devices such as TWTs or Klystrons.
· Candidate must be skilled in specifying, and performing high power RF test processes.
· Candidate must have experience in cost reduction and reliability improvement through
testing and screening.
· Candidate must have experience working in a fast paced production environment.
· Experience designing products for airborne applications a plus.
High Voltage work experience is a plus
Years Experience Required:
At least five years of experience specifying, and performing RF test processes with high power microwave devices such as TWTs or Klystrons.
Education Required:
B.S. Degree in Electrical Engineering or equivalent
Company Name: Xicom Technology
Apply for this Position
 

Manufacturing Engineer
Focus will be to target programs for cost reduction, process improvements and cycle time reduction, including support to resolve process or material related issues. Will also support the new projected business.
RequirementsExperienced in manufacturing processes and cost improvements in the following areas: substrate assemblies, PWB assemblies and higher level integrated RF assemblies, epoxies, solders, sputtering, metallization, machining, material analysis, chemical analysis and failure analysis.
Develop manufacturing documentation, tooling and fixtures (AutoCAD experience) for high reliability space and military products.
Familiar with MIL-SPECS, device screening and environmental/Qual testing
Provide technical support to customers and suppliers
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

SR. Manufacturing Engineer
At least 5 years progressive experience in manufacturing support, process and fixture design, CAD, problem solving, and product documentation practices in an RF environment.
Excellent written and oral communications skills
Ability to utilize software applications such as Excel, Word, Project, and Autocad . Familiarity with Eagleware and other design suites is a plus
An Engineering Degree is desirable but not required if life experience is adequate
Demonstrated mechanical and RF aptitude
Training and /or experience in designing for product manufacturability
Ability to work cooperatively with all employees and management.
Working knowledge of MRP and Inventory Control practices
Position Responsibilities
Develop and document time standards / processes for all manufactured products including Instruments, Filters, Components, EAS and Sub-Systems
Act as production liaison to Product Engineering on planning and transitional issues related to emerging and developing products in terms of product structure, RoHs compliance, documentation, identification of tools and fixtures , prototype builds, and other issues
Develop, document, and catalog assembly / test fixtures as required for all manufactured products
Review and approve all Engineering /ISO documents released to various Production departments
Review, approve and communicate ECN’s on behalf of various production departments,
Value Engineering
Ongoing evaluation of existing processes and fixtures for efficiency improvements,
Ongoing review of product structure and material content for cost savings and SKU reduction
Review all documentation packages, products, practices, and processes for manufacturability and cost improvement opportunities.
Participate in MRB meetings as required
Work with Purchasing in resolving technical issues with Contract Manufacturers as required
Evaluate and recommend required (production) capital equipment.
Assume responsibility for RoHs compliance and maintenance for released products and conversion of non-RoHs products.
All other special projects and duties as required by management.
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

OPERATIONS ASSOCIATE ASSEMBLY IV
RESPONSIBILITIES:
' Meet production schedules, productivity goals, and quality standards
' Perform assembly, inspection, test, and rework operations in compliance with instructions and ISO 9000 requirements
' Soldering & wiring
' Optical fiber splicing
' Mechanical assembly
' Visual inspection, mechanical inspection & electrical testing
' Material handling, material control, and storage
' Maintain a clean and safe work area
' Production equipment operation & maintenance
' Identify, segregate, and disposition nonconforming material
' Marking & labeling product, equipment, and containers
' Material receipt, handling, & storage (includes material control & cycle counting)
' Packing & shipping operations
' Perform Shop Floor Control System data collection, SPC charting, & record keeping
' Enforce quality, safety, calibration, inventory and ESD control practices
' Train associates & peers
' Participate in corrective and preventive action to improve product quality & productivity
' Promote teamwork by helping others and being a good teammate
' Support customer visits & audits
' Understand and practice safety policies and procedures in the work place.
2. AUTHORITY:
' Consistent with Responsibilities
3. INTERFACE WITH OTHERS:
' This position will interface with all organizations as required to perform job responsibilities. Primary interface is with the test technicians, shop supervisor and process engineering.
4. MINIMUM QUALIFICATIONS:
' Education: High School Diploma or equivalent required, A.S. degree preferred
' Certifications preferred: ESD, forklift, blueprint reading, soldering, solder inspection, solder rework, fiber splicing, metrology
' Skills required: basic math, reading comprehension, visual inspection, mechanical assembly, soldering, ESD prevention, safety
' Skills preferred: component identification, quality improvement techniques, fiber splice, metrology methods (verniers, micrometers, gage blocks, etc.), industry workmanship standards, material control, MRP software, PC software applications, visual aids, ISO 9000 standards
' Experience: Three years previous experience in electronic assembly and test preferred
' Must meet pre-employment testing qualifications.
Company Name: The Couture Group, Inc.
Apply for this Position
 

SR RF Microwave Engineer
Job Description
Provide support from initial concept through production on assigned projects.
Provide technical expertise and direction to technicians and more junior engineering personnel.
Actively participate in the development and support of defined goals for the assigned group.
Interface with customers, product management, internal design staff, and other team members to actively support quality and customer satisfaction.
Responsible for product development from design through production release.
Required Experience
BS in Electrical Engineering required. MS in Microwave or Electrical Engineering with a concentration in microwave engineering preferred.
A minimum of 5 years of experience in design and test of RF/Microwave components or sub-systems required.
Practical microwave design experience in the frequency range of 1 to 40 GHz preferred. Requires theoretical knowledge to propose, design, analyze and test:
Microwave stripline and microstrip circuits.
Microwave systems - mixed signal - mixed passive and active.
Microwave antennas.
Experience using advanced design tools required:
3D electromagnetic simulation – Ansoft HFSS or equivalent.
Linear and non-linear design - Ansoft Designer or equivalent.
Cad Software – AutoCad or equivalent.
Matlab and/or Excel Visual Basic or equivalent high level programming languages.
Experience in leading a team to meet short and long term goals and take charge of a product or product family from conception to customer adaptation.
Experience in writing specifications and proposals, and presenting technical material.
Excellent communication and interpersonal skills with the ability to correspond effectively with coworkers, customers and vendors.
Ability to act as a technical lead and mentor on military and space projects.
Excellent interpersonal skills and ability to work in a team environment.
Self motivated and goal driven
Excellent documentation, organization and time management skills.
Experience in the military or space industry preferred.
U.S. Citizen with ability to obtain a security clearance may be required for position in Space & Defense, but not in other areas of the business. Experience in the military or space industry is preferred.
Company Name:  Defense Talent Network Exe Search  
Apply for this Position
 

SR RF Microwave Engineer
Analytical and practical experience with high dynamic range receivers in the frequency range of L-Band to 45 GHz, high data rate, with moderate to wide bandwidth. Candidates should have practical experience who can communicate and write proposals along with technical design strength. The desired candidate should also have low phase source noise design, simulation and lab experience. Specific experience with microwave and mmWave Hybrid (chip and wire experience)is desired as well as good solid digital and analog electronics skills. Must be able to show experience with Project Management or Design Group Management Employer is an equal opportunity employer. EOE/M/F.H/V and DFWP
RequirementsBSEE/MSEE and 10 years
Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
Company Name:  Defense Talent Network Exe Search  
Apply for this Position
 

RF Engineer
Responsible for the design and validation of advanced RF/Microwave/Millimeter wave products, including documentation, evaluation and deployment of products. Responsible for working closely with planning, procurement, manufacturing, engineering, design/drafting, assembly, test, production personnel and management in the development, design, validation and deployment of cost effective, reliable products. Also responsible for modification, validation and deployment of the design changes of existing products. Conducts experimental tests and evaluates results. Selects and specifies components and equipment based on analysis of specifications and reliability criteria. Also reviews vendor capabilities and makes vendor recommendations. Responsible for oral and written presentations, project planning, design reviews and reports to colleagues and management.
Essential Duties & Responsibilities: Having wide-ranging experience, uses professional concepts and company objectives to resolve complex issues in creative and effective ways. Works on complex issues where analysis of situations or data requires in-depth evaluation of variable factors. Exercises judgment in selecting methods, techniques and evaluation criteria for obtaining results.
Qualifications/Competencies:Utilizes advanced RF/MMW concepts and company objectives to develop complex
products/components in creative and effective ways. Performs bench level testing of complex RF/MMW products/components to validate design and analyze hardware. - Analyzes product situations or data requiring in-depth evaluation of variable factors.
Company Name: Xicom Technology
Apply for this Position
 

Test Engineer I
This position will have primary responsibility for conversion of customer test requirements and development of test systems for RF/Microwave prototype and production hardware. Testing responsibilities include the development and implementation of test hardware architecture, software programs, troubleshooting systems and equipment, preparation of test and diagnostic programs, design of test fixtures and equipment, and completion of specifications and test procedures for new products..
Responsibilities include:
• Develop test setups, procedures, software tools to automate test activities.
• Integrate test software with test instrumentation and implement communication protocol to support test unit interfaces.
• Develop test requirement documents, document test software, and create test database records
• Work on problems of diverse scope where analysis of data requires evaluation of identifiable factors; sensitivity analyses; error matrices.
• Identifying new equipment or test methods to improve test cycle time.
Qualified candidates will possess:
• Minimum of a Bachelor’s Degree in Electrical Engineering (EE) or Computer Science OR equivalent professional experience and 3-5 years experience preferred as a RF Design or Test Engineer with hands-on experience designing, developing and maintaining test systems and software
• Familiarity with RF test equipment is essential. This includes Vector Network Analyzers, Spectrum Analyzers, Power Meters and other RF test equipment.
• Working knowledge of LabVIEW, MathCad and AutoCAD; circuit board design and macro programming using Visual Basic for Applications (VBA)
• Good verbal, written and communication skills desired
• The ability to obtain and maintain a security clearance, which requires US Citizenship
Company Name: The Couture Group, Inc
Apply for this Position
 

Sr. Mechanical Engineer
Senior level Mechanical Packaging Designer.
Mechanical Packaging – The ability to define mechanical structures to comply with assigned specifications. Designs RF products by solving all interrelationship problems of circuitry, connectors, signal transmission, housing, and covers to meet electrical, mechanical, and environmental requirements.
A proficient understanding of drafting and design practices (ASME Y.14.100m), and a thorough understanding of Geometric Dimensioning & Tolerancing (ANSI Y.14.5)
necessary for individual part configuration (Form Fit & Function) and attachment (Assembly).
Demonstrate ability to structure and plan a complex assembly with sub-assemblies.
Using verbal skills, 3 Dimensional / Isometric hand sketches to show the relation of one assembly to another, and relation of various assemblies to whole structure or project.
A good understanding of materials, finish selection, and compatibilities, relative
to mechanical structures.
A good understanding of machine shop processes and capabilities.
A basic understanding of Printed Wiring Board construction methods.
Experience in Packaging RF microwave assemblies and sub-assemblies.
AutoCAD 2004 or higher experience required,
AutoCAD Inventor 10 or higher experience desired.
Drafting Skills & Duties:
· Industry/ANSI Drafting standards.
· AutoCAD proficiency. Competently and efficiently create technical drawings.
· Demonstrate computer literacy particularly in regard to file management. Basic word-processing using MS Word.
· Accurate incorporation of Engineering Change Notices (ECN).
· Redline corrections and archiving. Be capable of detecting missing/inconsistent information from redlines.
· Parts list entry and changes.
· Basic Geometric Dimensioning & Tolerancing (GD&T)....
Company Name:  OSS 
Apply for this Position
 

ANTENNA SYSTEMS ENGINEER
This Senior Antenna Systems Engineer will provide technical leadership in the design and analysis of antennas, components, and subsystems associated with military communication systems.
Engineer will provide technical review in support of various program’s aperture requirements to include antenna performance.
BACKGROUND DESIRED
• A minimum of a BSEE and 10 years of relevant experience in antenna and subsystem design and analysis
• Ability to complete communication system and derive antenna system requirements from link budgets
• Design reflector or phased array antenna systems from requirements
• Supervisory experience and the ability to mentor junior engineers
• MUST be a US Citizen with the ability to obtain a security clearance
• Experience with Communication Systems and Radar Systems
• Excellent interpersonal and communication skills – verbal and written
• Hands-on experience to put designs to practice
Company Name:  The Couture Group, Inc.
Apply for this Position
 

Senior Engineering Test Technician
Responsible for all custom setups of the RF Test Ranges under direction from the Director of Engineering.
Ensure that all necessary equipment is identified and properly setup to perform test services to satisfy the requirements of engineering and LRIP transitions.
Responsibility as the main customer interface to ensure all requirements are understood and accomplished with the available equipment.
Supervises engineering test personnel in the development, implementation, and support of all aspects of indoor and outdoor testing of antennas and antenna systems to the required specifications and performance standards within the established schedule.
Oversees and operates automatic test equipment and test software. Performs and develops custom-built test fixtures/systems, new product repair, engineering evaluations, and purchase recommendations.
MAJOR RESPONSIBILITIES
A. Supervises daily function of engineering testing on both indoor and outdoor ranges.
B. Reviews and approves all test data to determine if parts are in compliance with specifications.
C. Assists with new engineering designs and tests.
D. Reviews and evaluates new product design specifications, product assembly and component test requirements ensuring technical accuracy and cost efficiency.
E. Conducts timely performance evaluations for all department employees and prepares development plans to expand their skills and experience.
F. Provides test schedule requirements to Operations. Monitors projects and ensures that timetables are met. Advises senior management of delays, problems or changes.
G. Develops design verification and production level test procedures.
H. As required perform qualification programs testing.
I. Maintain all development test documentation
J. Perform other work as assigned by the Director of Engineering.
K. Ensures all test personnel are appropriately trained and understand the test equipment, test procedures and follow all security procedures.
L. Work closely with Operations to ensure that there is a clean production test transition. Act as technical council to production test department and support production test issues that may arise.
M. Supports technical questions/inquiries from customers.
N. Supports Marketing/Sales as required.
O. Performs in house sample testing as required from Engineering or Quality.
P. Generates and/or oversee acceptance test procedures, quality and engineering reports on new programs.
Q. Develops project budgets, schedules and timetables by analyzing engineering project requirements, area workloads, and manpower availability. Monitors projects and ensures that engineering tasks, timetables and budgets are met. Advises senior management of delays, problems or changes.
R. Assist in the development and test of hardware designed and developed under independent Research and Development (IRAD) Programs.
Defense Security Service (DSS)
EDUCATIONAL AND PROFESSIONAL CREDENTIALS
Minimum Associates Degree in Electrical or Electronic Engineering or
15 years of industry experience with some formal course work can be substituted for degree.
Preferred B.S.E.E.
Company Name: The Couture Group, Inc.
Apply for this Position
 

ANTENNA DESIGN ENGINEER
Modeling, development, fabrication and testing of antennas and antenna systems from VHF through millimeter frequency range.
Experience required:
5 years hands-on experience in antenna of microwave component field.
Some familiarity with theoretical numerical methods such as Method of Moments, Physical Optics and the Geometrical Theory of Diffraction.
Use of Electromagnetic software
1. CST’s Microwave Studio – including familiarity with Macro programming
2. Ansoft’s HFSS– including familiarity with Macro programming
1. or 2 at least 3 years experience
3. Ansoft’s Designer and/or IE3D
4. FEKO – a plus
5. NEC wires – a plus
6. Ticra’s GRASP – a plus
Programming experience in Visual Basic and/or Matlab are absolutely required.
Excellent communication and writing skills are essential for this position.
Applications:
Tracking Systems
Satcom Systems
Radar Systems
VHF/UHF Communications Systems
Telemetry Systems
Threat Simulators
Surveillance Systems
Datalink Systems
Qualifications:
MScEE (preferable PhD) in antenna related field (antennas/computational electromagnetics/microwave etc.)
Company Name: The Couture Group, Inc.
Apply for this Position
 

Member Technical Staff (5785A)
We are seeking a candidate to joing our team as a Member Technical Staff. This will assist with repair of all items of SINCGARS family of radio systems. FSR services to include, but not limited to, providing operational, maintenance and support for tactical communication equipment in Middle East theatre. Maintenance will be performed utilizing the AN/GRM-122 radio test set and other standard items of maintenance equipment. FSR will be responsible for maintaining equipment, to include hardware and software upgrades for this equipment.
ITT Aerospace/Communications Division (ACD) www.acd.itt.com is a world leader in developing wireless networking systems for tactical communications. We are the creator of the core technology used in the world's two largest tactical digitization programs. ACD is a co-creator of the Software Communications Architecture for the Joint Tactical Radio System (JTRS) and is also the provider for America's newest ground to air radios used by the Federal Aviation Administration (FAA).
ITT offers a team-oriented, stimulating learning environment in which the veterans learn from the new generation, and gladly provide mentoring. You will find projects that are fascinating where the only limitation is innovation and creativity. Our leadership style is 'people-oriented'. That's one of the many reasons people who come here rarely leave. We are a CMMI Level III organization; that shows our commitment to process excellence. Note that the work is in a small division of less than 2,000 total employees with a historically stable environment. So it has the feel of a small and intimate organization, though it has the powerhouse resources and systems of the 8 billion dollar Fortune 500 Company that we are.
Take Flight ' Launch your career with ITT
ITT offers an outstanding compensation and benefits package including medical, dental and life insurance, 401(k) with employer match, and a pension plan. In addition, we offer other excellent salaried employee benefits including a relocation assistance, generous number of holidays, vacation days, tuition reimbursement, fitness club assistance and flexible work schedule.
Experience:
BSEE or Military Technical schooling/ ASEE and four years of experience.
3-5 years in the installation, maintenance and operation of large scale communications and/or electronic systems; some experience in training. Experience with Company systems and products; experience with military communications and/or electronic systems is desired. Experience in formal classroom training and training development is an asset.
Broad knowledge of electronic theory, circuitry, mechanics, and assembly techniques. A good knowledge of company and ILS standards, bid estimating procedures and project management skills.
Candidate selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. U.S. citizenship required.
Company Name: ITT Corporation
Apply for this Position
 

Radar Engineer 3 - SBInet Program
The candidate must possess the following competencies: RADAR TECHNOLOGY: Knowledge of radar technology (e.g., synthetic aperture, scanned arrays, target recognition, pulse doppler, high throughput, signal processing, high speed analog to digital conversion, high power amplifiers, high gain, time delays, time tagging, frequency hopping, pulse compression, side lobe cancellation). RADAR SYSTEMS INTEGRATION: Knowledge of multi-discipline integration issues applicable to radar systems, including reliability, availability, maintainability, testability, supportability, mechanical design, packaging, electrical, software, configuration management, environmental constraints, safety, human factors, etc. RADAR SYSTEMS TESTING: Knowledge of radar unit test, subsystem test, system test, installation test, performance test, operational test, built-in test, quality test, and acceptance test procedures. This includes knowledge of electromagnetics (EM) test equipment (e.g., network analyzer, logic analyzer, spectrum analyzer, power meters, test antennas, volt meters, etc.). ANALYTICAL SKILLS: Skill and ability to: collect, organize, synthesize, and analyze data; summarize findings; develop conclusions and recommendations from appropriate data sources. SYSTEMS THINKING: Consistently evaluates job tasks and processes on how well they help meet team objective(s); identifies non-value-adding components and barriers. Formulates change strategies; frequently seeks input from other project leads and internal employees to evaluate options for change and encourage buy-in.
Requires educational credentials meeting the Boeing classification standards for engineers and typically 5 to 8 years' experience in an engineering classification or educational credentials meeting the Boeing classification standards for engineers and either a Master's degree with 3 to 6 years' experience or a PhD degree with 0 to 3 years' experience in an engineering classification.
Company Name: The Boeing Company
Apply for this Position
 

Antenna Engineer
Currently seeking a highly motivated individual to become a part of a dynamic engineering team. This individual will undergo a comprehensive
training program enabling them to grow and develop as an Antenna Engineer under the direction of Senior Antenna Engineers.
Position responsibilities include:
• Designing and developing new products that meet customer specifications.
• Providing technical assistance to customers as required.
• Preparing proposals including design concepts, quoting, writing sections, and presentations to internal and external customers.
Qualified candidates will possess:
• Minimum B.S Electrical Engineering
• Basic understanding of microwave circuits,
• Knowledge of antenna radiation pattern and S parameter testing
• Knowledge of Antenna test equipment configuration and operation preferred
• Proficient in both MS Office and engineering design applications
• The ability to obtain/maintain a secret clearance which requires U.S. citizenship.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Antenna Engineering Manager
Reporting directly to the Plant General Manager, the Antenna Engineering Manager will be responsible for a cross functional engineering team to ensure COMPANY is meeting all program requirements for our current ground based SATCOM and data link antenna terminals and broadband COM antennas.
You will lead the technical effort of expanding our product line base from concept through production including design, supplier management and customer interface.
As the hands-on manager, you will be involved in multiple projects and assign engineers as required to meet the program needs.
As a creative manager, you will proactively identify resource shortages and product development roadblocks developing, suggesting and implementing alternate plans in a timely manner to avoid schedule delays.
Qualified candidates will possess:
• Ability to be a proactive leader
• Capacity to organize, plan, implement and evaluate engineering activities that span multiple disciplines
• Strong interpersonal skills with the ability to effectively communicate between the development team, executive management, business development, the DOD and most of all, the customer, is critical.
• This position requires 5-7 years experience in the defense antenna industry or a minimum of 7-10 years of experience in the RF/Microwave industry.
• MSEE degree or equivalent is desired preferably with previous management or lead engineering experience.
• Prior supervisory experience is preferred.
• Ability to obtain/maintain a security clearance which requires US citizenship.
Company Name: The Couture Group, Inc
Apply for this Position
 

RF/Microwave Design Engineer III
This position will design, prototype, and provide sustaining engineering support for custom integrated microwave assemblies and subsystems covering frequency ranges of up to 40GHz, and components such as filters, amplifiers, mixers, oscillators, attenuators, and switches.
During the development phase, serves as the project engineer responsible for coordinating all aspects of the project to meet technical, schedule, and cost goals.
RESONSIBILITIES INCLUDE:
• Generate technical proposals and cost estimates in support of new business development
• Present electrical design approach for customer design reviews
• Organize, schedule, and manage a full range of complex development projects, including technical requirements, schedule, and cost estimates
• Coordinate design efforts for electrical circuits, components, and subsystems including computer/mathematical modeling, part/material/process selection and mechanical layout and packaging.
• Coordinate production engineering support function, including fixture, material, design, process problem evaluation and solution
• Coordinate with mechanical engineers, designers, and drafters to produce mechanical design and drawing packages
• Direct technicians on test, tune, debug, and optimization tasks for prototype circuits and components to meet specification and manufacturing producibility requirements
• Perform specification analysis and component design (including creation of a drawing package) using REMEC standard design practices and produce prototype hardware consistent with COMPANY manufacturing producibility requirements
• Provide mentorship to junior engineers
Qualified candidates will possess:
• BS in Electrical Engineering with the knowledge typically gained through 7+ years related
• Experience with designing hermetic integrated microwave assemblies
• Broadband and narrowband filter, switch, and amplifier design experience from 1 to 18GHz
• RF/microwave engineering component/subsystem design experience
• Superior technical knowledge in electrical engineering discipline, allowing full range of technical analysis and design
• Strong working knowledge of RF design software (MWO, ADS, HFSS), AutoCAD and MS Office Applications
• Extensive hands-on experience with RF test equipment, with the ability to troubleshoot RF circuitry.
• Strong analytical and problem-solving skills
• Excellent oral and written English communication skills
• The ability to obtain and maintain a security clearance, which will require US Citizenship
Company Name:  The Couture Group, Inc
Apply for this Position
 

Senior Component Engineer
This position will be the primary technical contact between suppliers, COMPANY Microwave engineers and support.
The ideal candidate will have knowledge of passive components and semiconductor device physics, RF/Microwave parameters and test procedures, fabrication processes used in the microwave industry, and Statistical Process Control with experience in performing failure analysis.
Experience performing reliability predictions and component stress analysis, excellent written and verbal communication skills, good computer skills with database experience, and strong planning and organizational skills are desired.
Responsibilities include:
• Identification, evaluation, qualification, and documentation of critical microwave materials and components
• Establish and maintain reliability guidelines and develop program specific reliability documents as required
• Coordinate component selection, procurement, and inspection activities
• Assist microwave engineers in selection, procurement, and inspection of new or replacement materials.
• Review bid and proposal for non-standard component selection and test requirements
Qualified candidates will possess:
• BSEE, BS in Physics or equivalent professional experience is required.
• 5-8 years of combined design & test experience. Must have hands on hardware experience
• The ability to obtain and maintain a security clearance, which requires U.S. citizenship
Company Name: The Couture Group, Inc
Apply for this Position
 

Product Engineer
Product Engineer
Responsible for product design and validation, including documentation, evaluation and deployment of products. Responsible for working closely with planning, procurement, manufacturing, engineering, design/drafting, assembly, test and production personnel in the development, design, validation and deployment of cost effective, reliable products. Also responsible for modification, validation and deployment of the design changes of existing products. Analyzes and specifies equipment to establish solutions to complex problems. Conducts experimental tests and evaluates results. Selects and specifies components and equipment based on analysis of specifications and reliability criteria. Also reviews vendor capabilities and makes vendor recommendations. Responsible for oral and written presentations, project planning, design reviews and reports for customers, colleagues and management.
Knowledge and design experience with microwave (5-26.5 GHz) and/or millimeter wave (26.5-50 GHz) products and technologies
Knowledge and experience with cascaded RF chain design including: Gain, Amplitude and phase flatness, Noise power, Intermodulation, spectral re-growth and noise power distortion, Phase noise, Spurious, Temperature and vibration induced issues
Knowledge and experience with: Specifying microwave components, Microwave/millimeter wave component vendors, Isolators, filters, Waveguide Assemblies, Solid State Amplifiers, Linearizers, Cables etc.
Knowledge and experience with: Phase noise, AM/AM & AM/PM, phase matching
Knowledge and experience of devices including: Power Amplifiers (>25 watts), Frequency converters (up and down), Low noise and medium power solid state amplifiers, PIN diode attenuators, Pre-distortion, Filters, Mixers, Coupler, Power combiners, Power dividers, Waveguide components and transitions
Knowledge and experience of mechanical packaging
Knowledge and experience digital and analog control systems
Knowledge and experience of power supplies
Strong knowledge and experience of root cause identification
Knowledge and experience with MIL-STD requirements and testing
Well-developed analytical skills and well-developed documentation skills
Solid practical experience base
Creative
Enthusiastic team player
Disciplined approach to product design, documentation and validation
Excellent written and verbal communication skills
Able and willing to work in a highly collaborative environment
Able and willing to do hands on work
Able to appreciate and act on business driven issues
Ability to manage projects and project teams
Good multi-tasking skills
History of successful product development and delivery
Able to make appropriate technology choices
Demonstrated track record of working closely with other team members in a fast paced environment to bring development concepts into high yield, reliable production components, assemblies and products.
Education and/or Experience: Requires a minimum of 5 years of related experience designing, developing and production releasing of products. Requires a BS in Electrical Engineering. MS in electrical engineering preferred.
Company Name:  Xicom Technology
Apply for this Position
 

Sr. Microwave Engineer
Your Role:
You will lead and direct proposal activities, the development of ATE systems, subsystems and instrumentation from concept development through validation, and conceive, propose and lead R&D initiatives for advanced ATE applications.
Responsibilities:
Engineer the design and prototyping of new and next generation Automatic Test Equipment stations, testers and instrumentation using highly integrated technology including synthetic instruments.
Required Experience and Skills
• Direct, significant experience engineering the design and prototyping of new and next generation Automatic Test Equipment stations, testers and instrumentation using highly integrated technology including synthetic instruments.
• Knowledge of system level and detail hardware design from DC to microwave frequencies.
• Significant experience in the application of ATE systems and instrumentation for the testing of RF, Microwave and high power Radar Systems.
• Experience in the design and development of Test Program Sets, Self Test and Calibration software.
• BSEE/MSEE
• US Citizenship required
Company Name:  L-Tech Associates
Apply for this Position
 

Filter Design Engineer (Tunable Cavity Filters)
JOB DUTIES and RESPONSIBILITIES:
• Responsible for design activities in product development projects.
• Ensure achievement of commitments related to:
Specifications
Design features affecting cost
Schedule
Verification and qualification on product development projects.
• Responsible for discussing specifications with team management to achieve project goals.
• Promotion of COMPANY strengths and technical capability to COMPANY customers and suppliers.
• Responsible for following the product development process and procedures.
• Responsible for following the most efficient methods of work and identifying opportunities for improvement.
• Responsible for maintenance of project documentation according to the ISO procedures and also in accordance with COMPANY global guidelines.
• Responsible for all development activity related to design of filter products including but is not limited to simulation, layout design, prototyping, test planning, and testing.
• Completing of feasibility studies related to new product opportunities as requested and approved from team management.
• Help in project planning (time schedule, budget, manning) by providing realistic estimates of the work load.
• Ensure that production and field problems related to design are solved through corrective actions.
EXPERIENCE:
• Capable of simulating complex filter topologies using simulation SW used in the department.
• Can generate conceptual product layouts for products that include cavity filters, coaxial LP-filters, directional couplers, LNA and other PCA assemblies using customer specifications as a requirement and simulation SW (circuit simulator and 3D electromagnetic simulator) as a tool.
• Familiar with cavity filter design using dielectric resonators.
• Proficient with all common RF test equipment and knowledgeable of their limitations.
• Understands and communicates cost impacts of all design details including materials and manufacturability aspects.
• EDUCATION: Electrical Engineer or B. Sc. in related field (Math, Physics) with knowledge of RF design and development methods, test equipment, and manufacturing methods or equivalent.
Company Name:  The Couture Group, Inc
Apply for this Position
 

Mechanical Engineer (RF Components)
The mechanical engineer is primarily responsible of the mechanical design of RF components, particularly filter, duplexer and integrated system housings and subcomponents.
Based on his (her) experience, the mechanical engineer can be responsible as a technology gate-keeper, for a product running in production or for tools or procedures in R&D.
The mechanical engineer is responsible for the following:
• Carries out the assigned project tasks according to the agreed technical, quality and economical goals,
• Develops knowledge of suppliers actual process capabilities.
• Advises RF and mechanical designers to design within these capabilities,
• Develops specifications, layouts, well-defined sketches, models or verbal instructions sufficient for detailing housings and components,
• Ensures that the work observes the current standards for documentation, drawings, parts lists, numbering systems, especially regarding versions and traceability,
• Works in close global coordination with other mechanical engineers of the same Business Units in other locations,
• Directs mechanical designers or draftsmen to make corrections, revisions, and changes to layouts as decided by the development team,
• Executes tasks and communicate issues in a timely manner,
• Investigates new processes that could be beneficial to RFS or it’s customers,
• Where required, assumes a lead role in mechanical testing and failure analysis,
• Supports the RFS sales and marketing groups in maintaining and developing customers.
• Works with the engineering and manufacturing teams to support design for manufacture and automation.
Qualifications/
EXPERIENCE:
• Ability to simultaneously manage multiple projects.
• Good communications skills.
• Good organizational skills.
• Self-motivation to produce high quality work in a timely manner.
• Hands on.
• Team worker.
• Experience in casting, injection molding, sheet metal work and machining is preferred.
• EDUCATION: BSME or equivalent. Experience with computerized mechanical 3D CAD software.
• Experience with modeling software (FEA, Airflow simulations,…).
Company Name:  The Couture Group, Inc
Apply for this Position
 

Manufacturing Test Engineer
Responsible for providing Manufacturing with technical support in: RF Test, Power Supply Test, System Test, and New part/product introduction. Provide technical direction to the test areas to troubleshoot and repair product. Improve the manufacturing test and screening processes that result in cost reductions and
increased throughput, and higher reliability. Create and maintain test procedures and specifications. Evaluate microwave components and suppliers. Create Bill of material (BOM) and ECO generation. Failure analysis of various assemblies and components. Provide day to day support to the production lines. Assist Engineering as needed with new product introduction into Manufacturing.
Skills/Training Required:
· Candidate must have experience using or manufacturing high power microwave devices such as TWTs or Klystrons.
· Candidate must be skilled in specifying, and performing high power RF test processes.
· Candidate must have experience in cost reduction and reliability improvement through
testing and screening.
· Candidate must have experience working in a fast paced production environment.
· Experience designing products for airborne applications a plus.
High Voltage work experience is a plus
Years Experience Required:
At least five years of experience specifying, and performing RF test processes with high power microwave devices such as TWTs or Klystrons.
Education Required:
B.S. Degree in Electrical Engineering or equivalent
Company Name: Xicom Technology
Apply for this Position
 

Sr. RF LNA Design Engineer
Sr. LNA Design Engineer is responsible for the development of products to an agreed schedule, cost, and other development requirements.
Sr. Engineer functions as a system level technical lead on development programs, and may direct other engineers and technicians.
The position requires demonstrated skills in many facets of RF amplifier design; especially low noise amplifier, and sub-system design for the cellular and PCS frequency bands.
Familiarity with receiver architectures and current wireless modulation/multiple access schemes (e.g. GSM, CDMA) is a strong plus.
Sr. RF Engineer is a key member of the Active RF development team.
Sr. RF engineer works with R&D to identify new technologies, devices, sources and manufacturers that Company should work with.
Sr. RF Engineer is responsible for keeping up with the latest developments that will shape the Low Noise front-end design in telecommunication industry.
The Sr. RF Engineer is expected to help advance the teams overall technical competence in active RF design.
REQUIREMENTS:
Educational skills required:
B. Sc. Required (M. Sc. is preferred) in related field (Math, Physics) with
knowledge of high volume RF product design and development methods, cost structure, RF test equipment, and manufacturing methods.
Minimum of 5 years of experience with high volume RF products is required.
Language
English, written and spoken fluently.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF/Power Amplifier Design
RF or microwave solid state circuit design with expertise in Power Amplifier, bias and control circuits, matching networks, and/or filter/diplexer design.
Responsibilities include planning, design, simulation, verification, and production ramp support of highly integrated, high volume RF Power Amplifier and Front End Module products for wireless systems-GSM
A thorough understanding of impacts and interdependencies of other elements in the RF system is critical to success.
Job Requirements :
Effectively plan and execute RF and analog circuit and IC designs.
Ability to schedule and execute a project to meet critical deadlines within the cost and performance criteria provided by customers and marketing.
Strong circuit simulation skills including HP ADS, Momentum, Cadence SpectreRF, HSPICE and/or PSPICE is necessary. GSM
Position requires a BSEE/MSEE with significant related experience.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Reliability/Failure Analysis Engineer
Perform electrical and physical failure analysis on RF power amplifier products and linear products to support the company goal of improving product reliability and performance. Understand, from a reliability standpoint, the materials, properties, process capability and techniques used in production, particularly in GaAs HBT and Si wafer fabrication. Make recommendations for design engineering, process engineering and packaging engineering on selection, manufacturing, application and test of electronic components and systems.
Uses electronic circuit and device physics concepts; develop proficiency in operating FA tools, such as X-ray, C-SAM, photon emission microscope, SEM, FIB, etc. Read circuit schematics and layouts, and applies failure analysis procedures to identify the failure location and the root causes (troubleshooting capability). Write failure analysis reports, including charts and photographs. Co-ordinate with design engineering, process engineering and package engineering to correct the product defect or weakness and to improve the product reliability.
REQUIREMENTS:
B.S in science or EE. Advanced degree and FA experience required. Hands on lab experience preferred with tool such as optical microscope, X-ray, C-SAM, SEM and photo emission microscope
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF Reliability/Failure Analysis Engineer
Perform electrical and physical failure analysis on RF power amplifier products and linear products to support the company goal of improving product reliability and performance.
Understand, from a reliability standpoint, the materials, properties, process capability and techniques used in production, particularly in GaAs HBT and Si wafer fabrication.
Make recommendations for design engineering, process engineering and packaging engineering on selection, manufacturing, application and test of electronic components and systems.
Uses electronic circuit and device physics concepts; develop proficiency in operating FA tools, such as X-ray, C-SAM, photon emission microscope, SEM, FIB, etc.
Read circuit schematics and layouts, and applies failure analysis procedures to identify the failure location and the root causes (troubleshooting capability).
Write failure analysis reports, including charts and photographs. Co-ordinate with design engineering, process engineering and package engineering to correct the product defect or weakness and to improve the product reliability.
Requirements:
B.S in science or EE. Advanced degree and FA experience required.
Hands on lab experience preferred with tool such as optical microscope, X-ray, C-SAM, SEM and photo emission microscope
Client is an innovator of high performance analog and mixed signal semiconductors enabling mobile connectivity.
The company's power amplifiers, front-end modules and direct conversion radios are at the heart of many of today's leading-edge multimedia handsets. Leveraging core technologies
Company Name: The Couture Group, Inc.
Apply for this Position
 

ESD Characterization & Test Technician
The technician will support engineering activities with respect to ESD such as test, checkout, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized test equipment. Applications may include RF, digital and / or logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions.
Performs operational test and fault isolation on systems and equipment.
Assists in determining methods or actions to remedy malfunctions.
Assists in the design, construction, test and checkout of test equipment.
Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators and specialized test apparatus.
The position will work in the ESD Characterization and Test Group of the Quality organization
Requirements
The successful candidate will be expected to train on and then have the primary responsibility for conducting characterization tests such as ESD ( HBM, CDM, MM, IEC-61k).
Writing skills are required as the technician will be generating reports.
The primary responsibility will be to conduct room temperature ESD testing and RF measurements on semiconductor devices using RF ATE equipment.
The ESD and ATE testing requires ability to accurately follow detailed setup instructions (verbal and written), software and hardware selection, verification and calibration procedures.
Prior experience with fundamental Electronics, RF circuits, measurements and concepts is preferred
Company Name: The Couture Group, Inc.
Apply for this Position
 

Manager, ESD Characterization and Test
Job Description:
The individual will manage all activities related to ESD characterization, verification, design review, database management, scheduling and analysis for high-speed active, precision passive circuits of advanced process and module technologies.
The individual will manage, mentor, coach the engineers and techs on all the ESD efforts in Company.
He/She will provide value added service to design engineering in improving the ESD threshold.
The individual will effectively interface between manufacturing and design, and provide guidance in product reliability and ESD protection methodology for analog/mixed-signal/RF ASIC and module design.
Requirements:
The position requires extended knowledge in semiconductor device physics and circuit design methodology for advanced Si and compound semiconductor technologies.
Supervisor skill and a good team player is essential.
In-depth understanding of ESD device design and characterization is also necessary.
Required skills include
1) Should have managed more than 3 technical people in providing guidance and direction.
2) Hands-on experience of wafer-level characterization for high-speed active, precision analog passive, and ESD devices, facilitate STR builds.
2) Hands-on experience in Cadence Spectre, Virtuoso, ADS and 3D device simulator.
3) Understanding in design methodology for analog/mixed-signal/RF ASIC and module.
4) Understanding and working knowledge of the High Speed / Rf automated test systems including Network analyzer, power meter and synthesizer.
Minimum Requirements: Bachelors of Science, Electronics; 5 years relevant experience
Company Name: The Couture Group, Inc.
Apply for this Position
 

ESD Characterization & Test Engineer
The individual will perform ESD characterization and analysis for high-speed active, precision passive circuits of advanced process and module technologies.
The individual will be responsible for development, QA, and maintenance of foundry model libraries and ESD protection methodology for high-speed mixed-signal and RF application.
The individual will effectively interface between manufacturing and design, and provide guidance in product reliability and ESD protection methodology for analog/mixed-signal/RF ASIC and module design.
Requirements:
The position requires extended knowledge in semiconductor device physics and circuit design methodology for advanced Si and compound semiconductor technologies. In-depth understanding of ESD device design and characterization is also necessary.
Required skills include
1) Hands-on experience of wafer-level characterization for high-speed active, precision analog passive, and ESD devices,
2) Hands-on experience in Cadence Specter, Virtuoso, ADS and 3D device simulator.
3) Understanding in design methodology for analog/mixed-signal/RF ASIC and module.
4) Understanding and working knowledge of the High Speed / Rf automated test systems including Network analyzer, power meter and synthesizer.
Company Name: The Couture Group, Inc.
Apply for this Position
 

SR. Microwave/RF Devloper
Analytical and practical experience with high dynamic range receivers in the frequency range of L-Band to 45 GHz, high data rate, with moderate to wide bandwidth. Candidates should have practical experience who can communicate and write proposals along with technical design strength. The desired candidate should also have low phase source noise design, simulation and lab experience. Specific experience with microwave and mmWave Hybrid (chip and wire experience) is desired as well as good solid digital and analog electronics skills. Our Client is an equal opportunity employer. EOE/M/F.H/V and DFWP
Requirements BSEE/MSEE and 10 years
Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
Relocation Assistance available.
Great work environment and Benefits
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

Manufacturing Engineer
Focus will be to target programs for cost reduction, process improvements and cycle time reduction, including support to resolve process or material related issues. Will also support the new projected business.
RequirementsExperienced in manufacturing processes and cost improvements in the following areas: substrate assemblies, PWB assemblies and higher level integrated RF assemblies, epoxies, solders, sputtering, metallization, machining, material analysis, chemical analysis and failure analysis.
Develop manufacturing documentation, tooling and fixtures (AutoCAD experience) for high reliability space and military products.
Familiar with MIL-SPECS, device screening and environmental/Qual testing
Provide technical support to customers and suppliers
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

Engineering Assistant Microwave
Electronic bench technician will test and troubleshoot electronic parts and components ensuring that products meet government and or customer specification.
Requirements6-10 years current and hands-on experience performing tests and troubleshooting of RF Microwave components and subsystems. Able to work with verbal and written instructions. AS Degree and/or military equivalent
Excellent working conditions and equipment along with great benefits
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

Antenna Engineer RF/Brodcast
Responsibilities:
• Requires a dynamic, hands-on individual, with the ability to work in a fast paced environment; designing, optimizing and developing innovative antennas for the broadcast industry.
• Writes test reports and performs measurements using Network Analyzers.
• Requires a minimum of a BSEE degree with at least 2 years experience designing antennas.
• Working knowledge of RF simulation software such as Ansoft HFSS is also desired.
• Works closely with Mechanical and Civil Engineers
Experience required with:
• Antenna Design
• Transmission Line Theory
• Software - EM Simulation & CAD
• Simulation Software
• Testing - Antenna & Microwave
Company Name: JAMPRO
Apply for this Position
 

RF/Microwave Engineer
The RF/Microwave Engineer is responsible for the design, development and validation of coaxial cables and connectors. This includes the identification of areas of R&D that address unmet needs and have large potential markets, overview and communication of all projects under development, formulation of proposals and design and developments. This indivdual should have a Bachelors Degree in Electrical Engineering with some background/experience/classwork in RF/Microwave.
Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours.
Company Name: Micro-Coax
Apply for this Position
 

Product Realization Engineer
The Product Realization Engineer (PRE) is responsible for the following duties in relation to RF/Microwave coaxial cables, engineered to customer specifications:
*Participate in all Quote Readiness Reviews
*Perform final spec review and ensure complete compliance
*Create test and inspection plans, configure manufacturing process and take corrective actions when needed
*Control all supplier requirements
*Oversee all production pilot runs
*Oversee qualification testing
This individual should have a Bachelors Degree in Electrical or Mechanical Engineering with some experience or classwork in RF/Microwave.
Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours.
Company Name: Micro-Coax
Apply for this Position
 

Applications Engineer-RF/Microwave
The Applications Engineer solves customer’s transmission line problems using Micro-Coax’s products (cable, connectors, cable assemblies and metallized fibers). Provides direct sales assistance interpreting customers' inquiries and specifications. Responsible for customer contact explaining and selling Micro-Coax’s solutions. Responds to customer requests for quotations and proposals on program opportunities for made to print products, estimates job costs, development costs, quotes prices and authors bid proposals. Prepares analysis of competitior’s products and pricing strategies. Transitions program orders into the manufacturing environment.
This individual should have a Bachelors Degree in Electrical Engineering with some experience in RF/Microwave. This position will require travel.
Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours.
Company Name: Micro-Coax
Apply for this Position
 

Senior Electrical Engineer (MTS) – 303
The Gaithersburg, Maryland facility is a business unit of DRS Technologies. Employing about 380 people, this business unit provides creative RF solutions to the Department of Defense and prime contractors. The facility designs and manufactures HF, VHF, and SHF tuners and receivers, demodulators, direction finders and wireless intercept solutions.
Position Summary
The Senior Member of Technical Staff, Digital/DSP, creates a set of requirements, and then designs, develops, documents, tests, modifies, and maintains complex digital hardware devices, or related software, for radio control and signal processing. This position also provides technical leadership on a regular basis.
Duties and Responsibilities
FPGA design
Board-level digital design
Digital system design
DSP algorithm development and/or implementation
Will provide technical leadership and mentoring
Will write specifications, interface control documents, design descriptions and test procedures
Will contribute to proposals and technical manuals
Will provide technical support to Sales and Manufacturing teams
Minimum Qualifications
Must have BSEE, or equivalent, plus 7 years of relevant experience or MSEE and 5 years of relevant experience
Must have a record of success in completing complex FPGA or CPLD designs. VHDL preferred
Must have a record of success in completing complex digital circuit card designs
Digital signal processing background and experience is desirable
Experience writing software for DSP processor chips is a plus
Must be able to obtain a high-level security clearance
For immediate consideration, please add SMTS303DTN to the subject line and email resumes to: greatjobs@drs-ss.com. Only candidates that meet the qualifications as outlined above will be contacted for further information. Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
DRS is an Equal Opportunity employer and supports a drug free environment.
Company Name: DRS Signal Solutions
Apply for this Position
 

RF Engineer U.S Citizen
Duties of the RF Engineer include, but are not limited to:
1.Broad based development support for RF, analog, and digital applications. Primary focus on RF design of RADAR and communication systems
2.General technical documentation and proposal development.
3.Support for ATE and TPS development activities.
Our client provides an environment that attracts the brightest and the best. We seek out individuals who care about quality; individuals who like to be challenged to grow personally and professionally. We offer a highly competitive benefits package and a corporate culture that fosters individual and personal growth and career development.
Successful candidate will have:
1.BSEE required.
2.Minimum 3-5 years hands-on, experience with RF system level design (receivers, frequency generation/conversion), active passive component design (amps, mixers, par. Dividers, etc.), RF test and measurement techniques. Must be familiar with radar systems and antennas, mixed analog/digital hardware design experience a plus.
3.Ability to perform testability analysis, design test methods and procedures, and development test instrumentation.
4.Ability to perform requirements analysis and traceability to requirements throughout the development life-cycle.
5)Experience in life-cycle and system engineering processes
6) Ability to work in concert as part of a design team with minimal supervision on defined tasks
7. Ability to communicate clearly and concisely, verbally and in writing.
8.We encourage candidates with an active secret clearance to submit their resume for consideration for this position. Candidates with other active clearances or the ability to obtain a clearance will also be accepted for consideration.
MTI is a Florida-based corporation established in 1984 in response to a growing need for sophisticated aerospace and defense electronics systems.
With over 450 employees and over 165,000 square feet of facilities in six operating locations nationally, The client has the man power, facilities, and financial strength to provide total customer satisfaction.
The corporations clients ongoing commitment to planned growth while remaining competitive has firmly established us as a leading diversified, advanced-technology company. The Mission is to provide our customers with affordable high technology solutions leveraging off the corporations strengths in Engineering, Manufacturing, and System Obsolescence Management.
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

RF Engineering Manager
Job Description/Responsibilities: Reporting to the General Manager/Director of Operations.
-- US citizen preferred - and have, or be able to obtain, a security clearance.
-- Work with existing Engineering Department and become the “expert” with our design
approaches for tunable filter cavities (low & high power) & low-loss combiner designs.
Almost every new contract requires substantial modifications to existing designs.
-- Responsible for projects from start to finish – initial design concepts with Marketing,
thru customer proposals, thru system development, testing, completion of MIL-type
Qualification, and final hardware deliveries (hands-on and working independently).
-- We have a rare combination in design and manufacturing capability to completely
support engineering design in a timely, high quality fashion. See Co Profile below.
-- Participate in planning long-term product improvements to existing product lines.
-- Work with Marketing to understand new application requirements and to write product
specifications for stand alone filter/multicoupler products and/or packaged subsystems.
-- Help oversee contract performance, while at same time conducting company-funded
IR&D, and providing support and writing proposals to win additional contracts.
-- Help in vendor selection & management for key components and assemblies.
-- Help develop test plans/procedures for testing subsystem designs after contract awards.
-- High visibility with top management – opportunity to influence Company’s growth.
Education & Experience:
-- BSEE university degree, with higher degrees desirable.
-- Additional training in physics and/or mechanical engineering is very desirable.
-- Must have 5-10 years leading-edge design experience in:
- High-power (200W & up) tunable passive resonant cavity filters,
- Low-power (receive pre-selectors) tunable cavity filters,
- Extremely low-loss combiners (below 0.2 dB) and combiner networks.
- Air variable capacitive-tuned filter cavities.
- Lead-screw driven, center-conductor, inductance-tuned filter cavities.
- PIN diode switched capacitor filter cavities.
-- Existing products in 30MHz to 400MHz, moving to 2 MHz to 2 GHz.
-- Experience in specifying, purchasing, and testing other RF components & subassemblies,
such as mechanical RF switches, PIN diode switching devices, interference cancellers,
low-noise amplifiers, diplexers, etc. – all used in our RF Distribution Systems.
-- Familiar with Military environments & specification requirements would be a plus.
-- Familiarity with Military transceiver waveforms would be a plus.
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

Senior RF Microwave Engineer
Description
Senior RF/Microwave Engineer
DUTIES:
1) Design / Simulate / Analyze RF circuits used in receivers, transmitters and frequency converters.
2) Document designs in drawings and data items
3) Test prototype / first article units to verify specified performance. Assist in development of manufacturing documentation including assembly / tuning / test procedures.
4) Integrate RF assemblies with digital and software driven systems
Experience: Ten to 15 years of communications / radar RF design experience in the 2 to 30 gigahertz frequency range.
Tampa Microwave is a privately held, veteran owned, small business that employs 35 engineering, production, quality and management personnel in an 11,000 square foot facility in Tampa, Florida. The building is located in a mixed-use industrial park within 30 minutes of Tampa International Airport. The facility contains engineering laboratory stations for R&D, a secured stockroom, production cells and the necessary office space for all administrative, technical and operations personnel.
This position will report to the Vice President of Engineering. As the company grows, professional results and performance will be rewarded with additional management responsibilities for product lines or for groups of engineers.
Sales/ Customer Base
Military sales currently comprise about 95% of our annual revenue
a technology company focused on using our flexibility, lack of bureaucracy and technical competence to increase our market share in the Satellite Communications and Signal Intelligence market places. We function as a tightly coupled team. We value our customer relations and depend upon our workforce to provide customers with responsive service, concise and accurate information and ultimately specification compliant products
Company Name: Tampa Microwave
Apply for this Position
 

Systems Engineer
Responsibilities:
You will be responsible for requirements definition, architecture development, and system level design and integration of tactical, secure, state-of-the-art military communications systems operating in the 2 to 2800 MHz frequency range. Will also work closely with business development to define/develop operational requirements, system requirements, system concepts, cost and schedule, technical risk assessments, and trade studies for proposals. Lead requirements derivation and analysis, system specification, system design, functional partitioning, and system architecture definition on projects. Also lead the development of system test, validation, and integration plans on projects, and ensure maintenance of system integrity throughout project development.
Qualifications :
U.S. Citizenship and applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
BSEE or BSCS minimum
System design and architecture development for tactical, secure, state-of-the-art military communications systems operating in the 2 MHz to 2 GHz frequency range
Lead requirements derivation and analysis, system specification, system design, functional partitioning, and system architecture definition on projects.
Lead development of system test, validation, and integration plans on projects.
Work closely with business development to define/develop operational requirements, system requirements, system concepts, cost and schedule, technical risk assessments, and trade studies for proposals.
Experience in overall software radio communications architecture designs to include RF, digital, software, secure, and networking applications.
Excellent oral and written skills required.
Company Name: Thales Communications, Inc.
Apply for this Position
 

PROCESS ENGINEER III
Job Description -
MFA MANUFACTURING/MATERIALS ENGINEER FOR RF MICROSTRIP AND STRIPLINE ASSEMBLIES
* Develop and document assembly methods for the manufacture of Multi-Function Assemblies including:
* Connector installation
* Epoxy and solder circuit attach (soft-board and ceramic)
* Epoxy and solder die attach
* Wire bonding (thermo-compression and ultrasonic)
* Laser welding
* Finishing (paint, marking, and laser engraving)
' Circuit Board Fabrication
' Surface Mount assembly
* Develop procedures for handling and cleaning of components and assemblies including those which contain MMIC devices
* Possess and apply knowledge of the theoretical bases for manufacturing processes and materials, such as:
* Epoxies
' Encapsulants
' Conformal Coatings
* Solders
* Solvents
* Plating
* Metallurgy
* Apply and interpret state-of-the-art analytical and design tools, such as:
* Thermal analysis
* Structural analysis
* Design of experiments
* Finite element analysis
* SEM
* Auger
* CAD/CAM
* Possess and apply mechanical aptitude and mechanical design capabilities to tasks such as:
* Fixture design and development
* Development
of machine schedules (epoxy dispense, pick & place, wire bonding, etc.)
* Develop automated assembly techniques for:
* Epoxy dispense
* Pick and place
* Wire bonding
* Chip-on-board
* Carrier level testing
' SMT
* Develop and execute IR&D and qualification plans for manufacturing materials and processes.
* Develop and execute continuous improvement plans for both cost and reliability
* Lead assembly teams to meet throughput and quality requirements
* Perform failure analyses and develop corrective action plans for process and mechanical related failures
* Also responsible for:
* Capital equipment selection and set-up
* Process documentation and revisions
* Material dispositions
Education/Experience Requirement: B.S. with a minimum if 5 years experience or M.S. with a minimum of 2 years experience
' Security Clearance is required
' Overtime (As required)
' Some travel is required.
Company Name: The Couture Group, Inc.
Apply for this Position
 

ELECTRICAL ENGINEER IV
RF/Microwave/millimeter wave design engineer responsible as part of a team for the design, development, and implementation of high performance, integrated microwave assemblies for commercial and military applications. The successful candidate will have knowledge in the design and implementation of RF/Microwave/millimeter wave circuits. The candidate must be comfortable with component level circuit design (NF, Gain, IIP3), system level performance specifications, microwave board design, and issues encountered in the design/implementation of highly integrated multi-function assemblies.
M.S EE or PhD in EE with experience in the design of RF/Microwave/millimeter wave circuits. Good understanding of fundamental RF and Microwave circuit design principals; good understanding of analog circuit design principals; experience in EDA tools (specifically ADS and Cadence environmental); experience in full-wave modeling of passive printed circuits using 3-D electromagnetic simulators (Sonnet em and Ansoft HFSS); Good mathematical background and good team player.
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

TECHNICAL ASSOCIATE III
RESPONSIBILITIES
' Functionally test OC-192 optical telecommunications products
' Maintain and troubleshoot optical communications test sets and test instrumentation
' Perform preventative maintenance and maintain test set documentation
' Perform new test set introduction and prove-in testing
' Support day to day operations with minimal engineering supervision.
' Conduct experiments and record data and make recommendations to engineering.
' Manage process documentation, instrumentation, tools, and equipment.
' Maintain all required Process Engineering quality records
' Training of associates & peers
' Participate in corrective and preventive action activities (includes quality improvement)
' Support company and facility Environmental Safety and Health (ES&H) policies and programs.
' Education: A.S.E.E. / Technical degree / Extensive Military Experience in electronics required. IPC-610 training/knowledge desirable.
' PC Computer Skills: Proficient with Microsoft Windows XP OS; and, Microsoft Office software applications (Word and Excel). Experience and ability to learn how to operate National Instruments Labwindows/CVI and TestStand application software developed by Company's test engineers.
' Skills: Functional board test experience, electronic troubleshooting skills, electronic test and diagnostic equipment, technical math, reading comprehension, electronic assembly, test instrumentation, component identification, visual inspection, quality improvement techniques, industry workmanship standards, inventory control, MRP software, ESD prevention, safety, visual aids, ISO 9001-2000 standards (willing to train those who have the right aptitude & attitude).
' Experience: Three to five years experience in functional test and electronics assembly, knowledge of test instrumentation operation and practices. Experience using OC-192/SDH/SONET TEST instrumentation and experience using DWDM and optical systems integration and test instrumentation. Experience in maintenance/operation of optical communication test equipment: high speed sampling oscilloscopes, electrical and optical BERTs, power meters, optical attenuators, optical spectrum analyzers, etc.
' Must meet pre-employment testing qualifications.
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems.
Company Name: The Couture Group, Inc.
Apply for this Position
 

TECHNICAL ASSOCIATE V
RESPONSIBILITIES
This person will work within the Strategic R&D group to support the development of new microwave/millimeter-wave wireless communication devices/systems and millimeter wave sensors. As such, the position requires sound practical knowledge of RF and microwave test techniques and an appreciation of microwave fixturing and calibration issues. Specific responsibilities include:
' Device characterization: including S-parameter, noise figure and spectral measurements
' Transceiver testing
' Test results statistical analysis, parameter correlation and yield analysis
' Support development of semi-automated test stands
A Bachelor's degree in EE with bias toward RF/microwave engineering. Familiarity with RF & microwave test instrumentation including RF power, spectral, scattering parameter and noise figure measurements. Strong documentation, communication and organizational skills desired. Some experience with test automation software and RF/microwave EDA tools such as Agilent ADS preferred. Some experience with statistical analysis software packages such as Minitab preferred.
Special Requirements
Must be able/willing to work in a lab environment. Must be prepared to work overtime as needed to support a high growth business.
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

QUALITY ENGINEER III
RESPONSIBILITIES
Bachelor's Degree in Engineering required and a minimum of 5 years experience is preferred but not mandatory. Experience in quality engineering preferably in a Development environment is encouraged. A demonstrated record of successful experience in statistical analysis, reliability engineering, yield improvement, root cause analysis and corrective action, managing multiple projects is required. The candidate must be proficient in MS Office, Windows, and demonstrated aptitude for computer related applications and possess strong interpersonal skills with excellent written and oral communication skills.
Some travel required (including international) and some overtime required to complete specific assignments. Working knowledge of SAP, Matrix, training in Six Sigma and LEAN manufacturing and knowledgible in ISO 9000 and ISO14001 preferred.
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

PRINCIPAL ENGINEER-MMIC Power Amplifier
Job Description -
Principal design engineer needed to work on MMIC power amplifier projects including PA and LNA development for millimeter wave applications. As one of the key IC Products development areas, we have a need for a senior level designer with a detailed knowledge of GaAs MMIC power amplifier design with an emphasis on Point-to-Point radio applications. The position requires a detailed understanding of ADS design software, linear and saturated power amplifier design trade-offs and techniques as well as GaAs MMIC fabrication processes.
Principal design engineer needed to work on MMIC power amplifier projects including PA and LNA development for millimeter wave applications. As one of the key IC Products development areas, we have a need for a senior level designer with a detailed knowledge of GaAs MMIC power amplifier design with an emphasis on Point-to-Point radio applications. The position requires a detailed understanding of ADS design software, linear and saturated power amplifier design trade-offs and techniques as well as GaAs MMIC fabrication processes.COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Senior Product Engineer-SPE
Job Description -
Lead the RF architecture design, development, characterization and comparison of emerging RFID platforms and technologies. The ideal candidate will possess a demonstrated broad and deep understanding of modern commercial radio design and communications systems, including software defined radios, linear transmitters, high sensitivity receivers, interference mitigation, design miniaturization, high reliability and design to cost. Understanding of and effective interface with companion disciplines, including antennas and propagation, digital circuits, embedded software, and networking systems is vital. The candidate will provide expert guidance in quantifiably assessing multiple divergent technologies and implementation approaches for their respective strengths and weaknesses in real world environments, and the ability to research and apply technology standards and associated protocols is a must. Project leadership is expected, with the potential for larger team management in future.
BSEE and 12+ years design engineering experience, including specific RF architecture design, development, characterization and comparison of emerging RFID platforms and technologies. Advanced degrees may be applied toward a portion of the experience requirement.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF Systems Engineer
*Candidate must be a US citizen*
Our client has developed breakthrough technology enabling wireless OEMs to offer RF amplifiers with industry leading performance while slashing cost through simplicity of design and manufacturability. By moving the RF transmitter into the digital domain, our power module produces a multi-carrier power amplifier (MCPA) with a 50% reduction in capital cost and size, and a 40% increase in power efficiency resulting in reduced operating expense. The module simplifies the design for transmitters and provides the scalability required for numerous power level configurations, including fail-soft operation. By implementing our module, the overall base station cost is reduced by 20%.
Job Description
* Work closely with customers, engineering and manufacturing teams to develop reference designs and new product applications.
* Provide technical support and interface to customers. Work closely with customers during initial evaluation, product qualification and follow-on design applications.
* Create and maintain product application notes and datasheets along with other associated product collateral.
* Development evaluation units and execute characterization tests.
* Significant travel to customer locations will be required, between 25% and 50%.
Required Skills
* Knowledge of cellular base station architecture, product qualification procedures and CDMA standards and systems is required.
* Proven experience working with customers on analyzing RF circuits and components for wireless infrastructure equipment.
* Experience with transmit lineups including high power RF amplifiers.
* Excellent written and oral communication skills are required.
* Experience in engineering validation, testing, and debugging.
* Working knowledge of RF circuits, RF tools, and laboratory test equipment is a plus.
* Skilled in RF measurement techniques such as - IP3, 1dB compression, ACPR, EVM, etc. and using RF development tools such as ADS.
Company Name: Veriseo
Apply for this Position
 

Field Technician I
RESPONSIBILITIES
Our tough and talented Field Technicians are asked to:
· Isolate and resolve complex issues at the BTS cell sites with patience and ease
· Conduct routine preventative maintenance to insure equipment is up to par in case of emergency
· Collaborate with equipment vendors, T-Mobile Network Operations Center personnel, and members of the RF Design group
· Play a central role in process optimization—in the form of expansions, work orders, site builds, and integrations
· Provide expert advice and coaching to less experienced technicians
QUALIFICATIONS
· Experience or education equivalent of Associate’s degree in communications, navigation, radar, electronics, or computer technology
· Understanding of all components of a GSM network, including T-1 architecture and microwave theory
· Familiarity with RF engineering aspects of cell site construction
· Superb communication skills
· Flexibility to work shifts and on-call as needed
· Clean driving record
· A great attitude
· A healthy dose of problem-solving common sense
Company Name: T-Mobile
Apply for this Position
 

Senior Quality Engineer
Job Description -
' Manage and support the quality functions of various microwave devices, specifically for Boeing Space Products.
' Work closely with the materials planners, buyers and quality engineers to identify customer, supplier and internal quality requirements and objectives.
' Perform internal audits, maintain and enhance ISO 9001:2000 and AS 9100 quality systems, generate failure analysis reports, support and supervise inspection personnel with set up and workmanship criteria.
' Support customers with audit functions, generate quality plans, participated in design reviews, and perform dispositions on non-compliant material. Support customer on-site inspections and generate and review and approve applicable documentation associated with sell-off.
Experience -
' Experience in manufacturing techniques for microwave hybrids is preferred. Candidate must also have good writing and communications skills and be willing to work in a dynamic environment. Must be a US citizen and be able to obtain a security clearance. Experience or training with SAP is a plus.
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANYto strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Engineering Assistant II
This person will work within the Strategic R&D group to support the development of new microwave/millimeter-wave wireless communication devices/systems and millimeter wave sensors. As such, the position requires sound practical knowledge of RF and microwave test techniques and an appreciation of microwave fixturing and calibration issues. Specific responsibilities include:
' Device characterization: including S-parameter, noise figure and spectral measurements
' Transceiver testing
' Test results statistical analysis, parameter correlation and yield analysis
' Support development of semi-automated test stands
Experience -
A Bachelor's degree in EE with bias toward RF/microwave engineering. Familiarity with RF & microwave test instrumentation including RF power, spectral, scattering parameter and noise figure measurements. Strong documentation, communication and organizational skills desired. Some experience with test automation software and RF/microwave EDA tools such as Agilent ADS preferred. Some experience with statistical analysis software packages such as Minitab preferred.
Special Requirements
Must be able/willing to work in a lab environment. Must be prepared to work overtime as needed to support a high growth business.
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Principal Engineer
In general, the candidate should be able to perform complicated and difficult engineering work of major complexity requiring a high degree of competence and with minimal direction and supervision. Exercises full technical responsibility for planning, organizing, and conducting technical projects with the design, fabrication, modification, and evaluation of components or circuitry for use in specific electronic or electromechanical applications. Plans projects involving exploration of product problems including the definition and selection of new concepts and approaches to the development of new products. Prepares new design specifications. Analyzes complex technical data and/or drawings related to the organization's product requirements. Develops and makes recommendations regarding engineering design, development, and technical problem solving.
More specifically, the candidate should have experience in the design of RF, microwave, and mmW Mixers, Up / Down Converters, IQ Modulators / Demodulators and the required passive matching/transformation and biasing structures. While direct experience with Schottky based realizations of the above circuit concepts is not an absolute requirement, depending upon the candidate's grasp of the fundamental principles of high frequency design, this experience would be a very definite plus.
Candidate will be required to interface with specific customers to resolve technical and specification related issues. This activity will involve meeting with the customer on-site and, from time to time, travel to the customer's site.
Experience: 8 yrs min/6 yrs min Education: BSEE/MSEE
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Principal Engineer
Job Description -
The job is to develop best in class IC synthesizer solutions for base-stations and hand set applications using CMOS and BiCMOS technologies. Responsibilities will include coordination of IC staff with management, developing various sub-cell circuits as: regulators, band-gap and precision current references, VCO's and RF dividers, RF buffer amplifiers, LNA' s, charge pumps, prescalars and mixers as examples Additional responsibilities will include top level chip analysis and verification. The various protocols to be supported are: WCDMA & GSM / EDGE for both transmit and receiver applications.
Experience -
The experience level for this position requires 10+ years of RF mixed signal and analog IC design to include evolving a design from concept to production. Skills required are in depth knowledge of Cadence software simulations tools such as Spectre, Spectre-RF, Spectre/AMS, ultraSim and verification tools such as Assura and Calibre. Knowledge of Agilent software such as ADS, momentum, HFSS, Ptolemy, Veloce_RF is a plus.
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Engineer - Manufacturing / Production
Job Duties
' Lead yield improvement efforts on short range sensor and ARS200.
' Oversee troubleshooting of production failures
' Participate in design for manufacturing efforts for new products specifically the SiGe short range sensor
Experience -
Desired Experience/Skills:
5+ years RF/microwave experience
Minimum Requirements:
BSEE plus related work experience.
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Electric Engineer
Job Description, including experience, education and skills required:
This position is for a lab manager/technician with experience supporting engineers of all electrical design disciplines, including digital, analog and RF. The qualified candidate will:
' Provide lab support to staff of about 25 engineers (RF, analog, digital, FPGA, board, etc.)
' Manage lab, including acquisition/tracking/calibration of test equipment
' ESD control and monitoring
' Develop, fabricate and assemble Test board for DTx mixed signal ICs, including
' Schematic entry, layout (or interface to layout folks), bill of materials; generation of test plans
' Be proficient in the test, debug, data collection and presentation for analog, digital, and RF boards and associated ICs
' Design of circuits and software to facilitate test and debug
Experience -
This position requires a minimum of an ASEE and 5 years experience as a lab manager and technician. It also requires good verbal and written communication skills as the candidate will be required to work within a close-knit multi-disciplinary team, interface with 3rd party vendors/partners, and document/present design work. Opportunity for career growth.
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Principal Design Engineer-Filters
Principal Design Engineer(Filter) needed to work in new business development group to develop novel high power filters and duplexers. The responsibilities include working with the inventor of this technology, gaining an understanding of the fundamental technology, and commercializing new filter products. As one of the key new business development areas, we have a need for a principal level designer with a detailed knowledge of filter design, testing, and applications. The position requires a detailed understanding of ADS design software, EM Simulation software, mathematical filter analysis/design software, and design trade-offs. It also requires an extensive knowledge and practical application of the testing/tuning of traditional comb line and DR filters, duplexers, and tri-plexers. The position requires a knowledge of passive elements commonly associated with filter products and their implementation into these products in a cost effective manner. The design, implementation, and detailed understanding of active RF circuit chain analysis and fundamental design techniques is also desired, but not required. Designing for cost is a fundamental skill which the designer must have to be considered.
RESPONSIBILITIES/ESSENTIAL FUNCTIONS:
Design new and innovative tunable filter products for the commercial wireless market. Participate in technical design reviews to help evaluate the viability and functionality of new designs. Work with the engineering manager in developing new customer requirements by leveraging the IP developed in corporate R&D. Contribute to the development of product and technology roadmaps pertaining to filter products. Provide mentoring for junior designers.
MAJOR JOB COMPLEXITIES OR CHALLENGES:
Focusing the technology on a few customer applications and commercializing those applications to rapidly develop a starting product base.
This position requires an advanced degree in a science or engineering discipline. Ten or more years of significant post-graduate work experience in a technical organization with a proven track record of filter design, development, and synthesis.
Education:
PHD+5yrs, MS+8yrs, or BS+10yrs
Company Name: The Couture Group, Inc.
Apply for this Position
 

PRINCIPAL ENGINEER-Military Subsystems
The position is for an Engineering Team Lead / Principal Engineer responsible for managing engineering activities in support of a multi-million dollar military subsystem product line.
Responsibilities include working with key customers and the Program Office to generate winning technical solutions, manage the team's execution in the design, development and transfer to production of subsystem products, identifying IR&D programs and their implementation.
Duties include the management of the engineering team, responsibility for the technical direction and execution on key programs, driving the team to complete subsystem development efforts that achieve the project performance, budgetary and schedule objectives. Proven experience with the design and development of subsystems for military and space-based applications is required. The successful candidate must be able to provide technical direction, make timely decisions and effectively manage others.
Technical Bachelor's degree and 10+ years experience in the design of RF/microwave multi-function assemblies, including 3+ years of technical management or technical project leadership. Strong management, leadership and planning skills are required. US Citizenship and the ability to be granted a DoD security clearance is required.
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

PRINCIPAL ENGINEER-RF Radar
This individual will serve as the primary point of contact for program status issues and many non-commercial aspects with a large customer.
On site support ranging from providing program updates, supporting on site testing and development and helping to define and implement customer/application specific changes needed to a standard product A strong candidate:
-Will support customer(s) (in the SE Michigan area) on site as required.
-Will support product launch on site at OEM assembly plants
-Has experience with the vehicle launch phases a plus
-Is familiar with CAN bus at various OEM's a plus
-Has experience with programming in C a plus
-Has good organizational skills needed
-Is self motivated and energetic
-Has a technical degree (EE. ME, ete)
-Has a background in RF or Radar applications
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANYto strengthen its position as the industry leader.
Company Name: The Couture Group, Inc.
Apply for this Position
 

PRINCIPAL ENGINEER-RF Design
Principal RF design Engineer responsible as part of a team for the design, development, and implementation of high performance radios for 700MHz to 4.9GHz wireless voice and data applications. The successful candidate will have a broad base of knowledge in RF design for wireless communications, specifically focused on the design of mobile and portable RF transceiver sections from analog baseband to antenna. The candidate must be comfortable with the complete RF section design and the relationship between component level device performance (NF, Gain, IIP3) and system level performance specifications (i.e. sensitivity, desensitization, etc.). Direct experience in radio transceiver design is required, with experience in LNA, mixer, VCO, synthesizer, and PA design desirable.
The successful candidate should have a minimum of 5 to 10 years experience in RF design for wireless communications. Minimum qualifications are BSEE; an MSEE is preferred.
Required Skill Sets:
A thorough understanding of all aspects of RF design for wireless communications systems
Direct experience in radio transceiver design.
Experience in LNA, mixer, VCO, synthesizer, and PA design desirable
Strong understanding of system level radio specifications and how they relate to radio performance
Experience in the design of high performance radios with demanding linearity requirements. Experience with CAD tools for RF design and PC board design.
Good team player skills.
Familiarity with the general concepts and requirements of multiple access air link protocols
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANYto strengthen its position as the industry leader
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF Design Manager
This RF Design Manager will provide project and team leadership within the RF design group. The individual will be responsible for evaluating and providing high level guidance with RF systems engineering and circuit design for a wide range of products and systems. These systems include tactical signal intercept systems, HF / VHF / UHF tactical radios, tactical and strategic satellite communications systems. Additionally, the manager will provide project scheduling, task assignments, cross-functional team coordination and team management. Resolving problems as necessary and developing/maintaining a high level of internal and external customer satisfaction, coordinating activities and managing schedules, project costs and budgets product development efforts with RF / analog content, verifying that the effort is fully compliant with internal standards and practices, analyzing proposed product development efforts with respect to risk (cost, schedule and technical performance) developing risk mitigation plans, and taking corrective action when an effort misses or is in danger of missing, cost, schedule or technical performance requirements. Will report product development status and problems to senior management. Responsible for providing timely resolutions to project development issues.
Requires Bachelor\s degree or equivalent in Electrical Engineering; and at least 10 years extensive experience with signal intercept and communication systems. Proven leadership and administrative ability, and maturity necessary to assume management responsibility for product development. Must be able to perform effective short-term and long-range strategic planning. Must have knowledge of technical, financial, schedule and management disciplines sufficient to take responsibility for project execution. Must be accomplished at targeting and achieving results, goal setting, prioritizing tasks, overcoming obstacles, establishing team standards and responsibilities and creating a results-focused environment. Should be familiar with government acquisition and contract management requirements, MIL-SPECS and standards. Experience with HF/VHF/UHF/SHF communication and signal intercept systems, MIL STD 188-141, and MIL STD 188-181/2/3, SPICE or similar modeling tools are strongly desired. Experience with high speed digital circuits and conversion techniques are a plus. Effective functional management experience of at least 3 years and demonstrated project management is also required.
US Citizenship is required. Applicants selected may be subject to a security investigation and must meet eligibility requirements for access to classified information.
Company Name: L-3 Communications
Apply for this Position
 

RF Engineer
Take a leading technical role in the design and development of navigation aid systems and subsystems.
Write requirements documents for RF systems and circuits.
Design and develop High Power Amplifier for Microwave frequencies.
Support the design of filters, power dividers, couplers, oscillators, low-noise amplifiers and other RF circuitry.
Develop multiple integrated stages and complex RF circuitry using microstripline or similar planar technology.
Generate schematics and oversee layout.
Test, develop and document RF systems and circuitry in a lab environment.
Analyze and develop systems concepts incorporating link budgets, statistical performance analysis and waveforms, spectrum and distortion analysis.
Participate in design and requirements reviews.
REQUIREMENTS
Ability to efficiently operate and use laboratory equipment such as Oscilloscopes, Spectrum Analyzers, Network Analyzer, Signal Generators.
Good RF skills with a focus on High Power Amplifier design.
Experienced with Microsoft XP and Office, Schematic Capture and Hardware simulation tools.
Skilled in microstripline, coplanar waveguide, or stripline circuit fabrication techniques.
Ability to work in a team environment.
Good communication and documentation skills.
Product development experience from concept to production.
Possess a master’s degree in electrical engineering and 5+ years of recent experience in RF Design.
Company Name: Moog Aircraft
Apply for this Position
 

Senior RF Design Engineer
Responsible for the design and development of low loss microwave control components between 500 MHz and 40 GHz. Assist with the design and development of receiver-related multifunction assemblies between 500 MHz and 40 GHz. Development to include analytical and computational design of digital and/or analog microwave control components; interface with manufacturing engineering, testing of prototype designs and modification of designs to meet customer specifications.
Qualifications:
BSEE or BS Physics required with an advanced degree desired. Detail knowledge of solid state microwave component theory and design. Detailed knowledge of 3D electromagnetic codes (HFSS) and microwave design and simulation tools (Microsoft Office) desired. Knowledge of hybrid microelectronics design and manufacture. Project Management experience required. Must be a U.S. Citizen and able to obtain a security clearance.
Company Name: Communications & Power Industries, Inc.
Apply for this Position
 

Product Engineer
Description
Responsible for product design and validation, including documentation, evaluation and deployment of products. Responsible for working closely with planning, procurement, manufacturing, engineering, design/drafting, assembly, test and production personnel in the development, design, validation and deployment of cost effective, reliable products. Also responsible for modification, validation and deployment of the design changes of existing products. Analyzes and specifies equipment to establish solutions to complex problems. Conducts experimental tests and evaluates results. Selects and specifies components and equipment based on analysis of specifications and reliability criteria. Also reviews vendor capabilities and makes vendor recommendations. Responsible for oral and written presentations, project planning, design reviews and reports for customers, colleagues and management.
Qualifications/Competencies:
Knowledge and experience of microwave (5-26.5 GHz) and/or millimeter wave (26.5-50 GHz) products and technologies
Knowledge and experience of cascaded RF chain design including:
Gain
Amplitude and phase flatness
Noise power
Intermodulation, spectral re-growth and noise power distortion
Phase noise
Spurious
Temperature and vibration induced issues
Knowledge and experience with:
Specifying microwave components
Microwave/millimeter wave component vendors
Isolators, Filters, Waveguide Assemblies, Solid State Amplifiers,
Linearizers, Cables etc
Knowledge and experience with:
Phase noise
AM/AM & AM/PM
Phase matching
Knowledge and experience of devices including:
Power Amplifiers (25 watts)
Frequency converters (up and down)
Low noise and medium power solid state amplifiers
PIN diode attenuators
Pre-distortion
Filters
Mixers
Couplers
Power combiners
Power dividers
Waveguide components and transitions
Knowledge and experience of mechanical packaging
Knowledge and experience digital and analog control systems
Knowledge and experience of power supplies
Strong knowledge and experience of root cause identification
Knowledge and experience with MIL-STD requirements and testing
Company Name: Xicom Technology
Apply for this Position
 

RF Engineer
Description
Job Summary: Responsible for analyzing, designing, developing RF/Microwave components used in satellite communication systems. These components include solid state frequency converters, medium power amplifiers and frequency sources operating from C Band through Q Band. Determines design approaches and component specifications based on analysis and evaluation of system requirements, Implements designs by working closely with design drafting, procurement ,assembly and test personnel. Analyzes equipment to establish product verification operating data, and defines test procedures to validate design Selects components and equipment based on analysis of specifications and reliability. May also review vendor capabilities to support development. Solid state microwave power amplifier experience in the 6 to 50 GHz frequency range and thin film MIC design and fabrication knowledge are also sought. Responsible for working closely with sales and marketing, other engineering colleagues, design drafting, assembly, test and production personnel to specify, develop and deliver products on time and within budget limits . RF/Microwave components will implement designs that are manufacturable , cost effective and reliable. Responsible for oral and written presentations, design reviews and reports for customers, colleagues and Xicom management.
Proven history of successful development of active and passive microwave components including:
Frequency converters
DRO’s
VCO’s
Phase locked sources
Medium power SSA’s
Voltage variable attenuators
Filters
Mixers
Couplers and Power combiners
Waveguide components and transition
Experience with development of thin film MIC, soft board and waveguide components and subsystems.
Able to use modern EM and linear and non linear circuit analysis tools.
Familiar with component package design for soft board and MIC based products.
Able to use mechanical design CAD tool such as AutoCAD.
Basic understand of thermal analysis and heat removal issues.
Able to design simple analog and digital electronic circuits.
Familiar with EMI suppression and measurement.
Skills with microwave laboratory test equipment
Automated RF/microwave test systems
Spectrum analyzer
Vector and scalar network analyzers
Phase noise measurement
Noise figure measurement
Other standard test equipment including power meters, signal generators etc.
Ability to specify MIC assembly equipment is a plus
Company Name: Xicom Technology
Apply for this Position
 

Manufacturing Engineer
Provide technical support to the manufacturing production lines building Traveling Wave Tube Amplifier (TWTA), Klystron Power Amplifier (KPA) and Solid State Power Amplifier (SSPA) products. Support will include specifying state of the art manufacturing processes, optimizing existing manufacturing processes, optimizing existing designs, specifying new designs, creating bills of materials for new products, generating ECOs for new and existing products, root cause analysis of production issues and implementation of corrective action.
Essential Duties & Responsibilities:
Design and introduction of derivative products into production
Day to day disposition of discrepant material
Hands on troubleshooting of manufacturing issues
Creating rework instructions
Addressing Engineering change requests
Writing Engineering Change orders
Implementing lead free solder into the manufacturing process
Specifying and testing packaging material
Training operators on the operation of the vibration system
Testing new and existing products for vibration
Specifying high voltage potting materials and processes.
Specifying and evaluating fan and blower assemblies.
Computer Skills and/or Tools: MS Office, FED EX shipping software and UPS shipping software
Qualifications/Competencies: Applicant must have a strong hands on mechanical background, ability to work well with production personnel, enthusiastic with documenting designs and processes, and working knowledge of RF test and troubleshooting
Education and/or Experience: 4 Years of relevant experience. BSME or equivalent technical background. Experience with Microwave test. Specifying crimp and solder connections. Experience with high voltage a plus. Experience performing airflow measurements and troubleshooting vibration issues using a shaker table.
Company Name: Xicom Technology
Apply for this Position
 

RF Circuit Design Engineer
The RF Circuit Design Engineer will design, simulate, layout and test RF circuits in the 200 MHz to 6 GHz range employing microstrip & lumped passive elements, device & transistor level active elements, RFICs and conformal antennas. Subsystem design areas will encompass oscillators, mixers, frequency synthesizers, efficient RF power amplifiers and low noise receivers for use in low power, highly miniaturized communications and sensor electronics. The candidate will also conceptualize and conduct innovative R&D in RF technology in support of company-wide complex systems development projects requiring unique wireless communications systems and signal processing. The candidate must be able to work effectively with minimum supervision, be comfortable working with a team of high-caliber engineers, and demonstrate the future potential for technically leading such teams.
Education & Experience Required:
The successful candidate will possess a minimum of a BSEE and 5 years experience designing complex RF circuitry. Additional experience and training desirable. Must be able to architect high performance transmitters and receivers, develop subsystem requirements, and design and integrate individual subsystems. Expertise in use of RF / Microwave design tools (e.g. Agilent ADS, HFSS, Spice, MATLAB / SIMULINK) and RF laboratory test equipment is required. Detailed knowledge of commercially available circuit board level RF components including amplifiers, mixers, modulators, oscillators, filters, detectors, PLLs and more functionally integrated RFICs is essential. Familiarity with spread spectrum systems, communications theory and GPS is highly desirable, and the capacity & drive to get things done is mandatory.
Company Name:  Charles Stark Draper Laboratory
Apply for this Position
 

Program Manager
Key activities of the position are:
1. Lead team during development and product qualification efforts,
2. Participate and assist in the transfer activities of product from engineering into production,
3. Assists in developing and implementing action plans for cost reduction activities
4. Works with Product Manager in the creation of internal development plans and status reporting to customer for development efforts
5. Track and report on key metrics for technical and financial performance
6. Coordinates quotation efforts for all development efforts
7. Expedite orders
M/A-COM is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries.
The corporations products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The client wants to strengthen its position as the industry leader in high-volume gallium arsenide (GaAs) and silicon (Si) semiconductor fabrication, device and component manufacture.
Minimum Qualifications
1. BSEE
2. 5{PLS} years of related experience in the RF industry
3. Capable of working in a constant changing environment
4. Ability to multi-task
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Hardware Engineer
Hardware engineer for broadband product development. Candidate will participate in development and testing of M/A-COMs WiMAX product solutions. Primary responsibility will be in designing and verifying the digital content of new wireless communication products.
Minimum education of BS degree in Electrical Engineering
Relevant coursework should include Digital Integrated Circuits, Computer Architecture, Signals and Systems, and High Performance Digital System Design.
Experience with VHDL program development and familiarity with board fabrication and SMT assembly methods is desirable. The candidate must possess hardware analysis and debugging skills using standard test instruments. Candidate must be motivated and work well in a diverse team environment.
The products include semiconductor devices, Microwave/RF integrated circuits, passive and control devices, antennas, subsystems and systems. The goal is to strengthen its position as the industry leader in high-volume gallium arsenide (GaAs) and silicon (Si) semiconductor fabrication, device and component manufacture.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

General Manager
Leads the Semiconductor Sector activities with multiple locations, multiple fabs, multiple technologies, (GaAs Phempt & HBT, SiGe, Silicon Bipolar Mesfet etc.) Duties include establishing the overall semiconductor strategy that will meet company qualitative and quantitative objectives on a sustainable basis, managing senior level product line & Fab Directors, interfacing with Field Sales and global customers, suppliers, and collaboration with senior managers in corporate to insure complementary strategies. There are currently 9 direct reports.
Responsibilities:
Responsible for the growth, management, and P&L for our Semiconductor Sector including product marketing, sales, development, engineering, manufacturing, customer service and shipments.
Develops and implements policies and procedures required to continuously improve results against established business objectives.
Develops and plans a comprehensive operational program in keeping with short and long term goals, schedules, and budgets.
Responsible for the development of objectives for profitable Sector growth. Implements and initiates strategic initiatives and actions to ensure that objectives are met.
Company Name:  Defense Talent Network Exe Search
Apply for this Position

Principal Microwave Engineer
The candidate should be able to perform complicated and difficult engineering work of major complexity requiring a high degree of competence and with minimal direction and supervision. Exercises full technical responsibility for planning, organizing, and conducting technical projects with the design, fabrication, modification, and evaluation of components or circuitry for use in specific electronic or electromechanical applications. Plans projects involving exploration of product problems including the definition and selection of new concepts and approaches to the development of new products. Prepares new design specifications. Analyzes complex technical data and/or drawings related to the organizations product requirements. Develops and makes recommendations regarding engineering design, development, and technical problem solving.
More specifically, the candidate should have experience in the design of RF, microwave, and mmW Mixers, Up / Down Converters, IQ Modulators / Demodulators and the required passive matching/transformation and biasing structures. While direct experience with Schottky based realizations of the above circuit concepts is not an absolute requirement, depending upon the candidates grasp of the fundamental principles of high frequency design, this experience would be a very definite plus.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Sr. RF/Microwave Modular Subsystem Engineer
Position will be manufacturing support for RF products. Role will support the product line by resolving issues relating to the supply of material from external sources and the assembly and testing of hardware. General computing skills and organization will be needed (Autocad, Excel, MS Word, Powerpoint). Position will participate in cost reduction initiatives such as Six Sigma and Lean. This role will interface with external suppliers, participate in supplier selection, and provide leadership along with procurement on supply chain management and supplier improvement initiatives. This position will also interface with internal suppliers and determine production schedules, perform capacity planning, resolve issues and implement improvement plans.
A BS in industrial, mechanical, manufacturing technology, electrical or a related field and 5 plus years of applicable experience is required. US citizenship and the ability to obtain a DOD security clearance is required.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Principal Design Engineer--RF/Microwave Subsy
In this position you will work in a highly motivated team environment to design and develop advanced miniature microwave and millimeter wave subsystems and components. Applications include missile front ends, radar receivers and communication transceivers. Must have the ability, experience, and desire to lead multi-disciplined project teams through development programs. Be responsible for leading project to technical compliance within schedule and budget. Be able to generate technical proposals and provide cost input for both recurring and non-recurring engineering. Perform subsystem level design and analysis of up/down converters and/or synthesized sources. A Principal Design Engineer will develop a variety of microwave and millimeter wave circuits, including amplifiers, filters, frequency multipliers, high power limiters, oscillators, switches, mixers, etc., as required to support subsystem activities. Design and develop multi-function microwave integrated circuits (MICs).
BS engineering degree, or technical equivalent, with 8{PLS} years of related engineering experience, or MS engineering degree with 5{PLS} years of related engineering experience is required. US Citizenship and the ability to obtain DOD security clearance is required.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Senior Program Manager
Provide leadership for defense electronics hardware development programs from concept through production transition.
Work in a highly motivated team environment that designs and develops advanced miniature microwave and millimeter wave subsystems and components for missile front ends, radar receivers, and communication transceivers.
Manage proposal efforts for development programs
Coordinate internal management and customer interfaces at strategic and tactical levels.
Make presentations to internal management and customers to review proposals and/or status of ongoing projects.
Assist business development activities, and manage multiple, cross-functional development teams with functional authority for proposal creation, contract negotiations, schedules, budgets, material procurement, and problem resolution.
Provide continuous analysis of program performance against financial goals, schedules and program metrics. Establish and maintain procedures to monitor and report program performance.
Financial analysis expertise, operations experience, or MBA desired.
Experiencel:
Theoretical knowledge at the BSEE/MSEE level and 5-10 years of experience (preferably 3 - 5 years as Project Engineer or Program Manager), including design at the component and/or subsystem level for RF, microwave and/or millimeter wave applications desired.
Senior-level microwave design engineers with project engineering experience interested in program management may also be considered for this position.
Must have demonstrated planning, organizational, leadership, presentation, decision making, analytical, and oral and written communication skills with the ability to excel in a dynamic environment under time constraints with aggressive performance goals and consistently changing priorities.
US Citizenship and the ability to obtain DOD security clearance is required
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Packaging Hi-Rel Engineer
Join a dynamic team of engineers supporting the manufacturing of metal packages for microwave frequency electronics. Manufacturing processes include glass-to-metal sealing, gold plating, laser marking, laser welding, and Metal Injection Molding. Responsibilities include the support of existing processes as well as participation in cost reduction and quality improvement programs. Oversee new product introduction, conduct new process implementation and participate in cross-functional R&D teams. Interface with design groups to ensure manufacturability of new product designs.
Education in Materials or Mechanical Engineering: Bachelors degree with 2-5 years experience. US Citizenship and the ability to obtain DOD security clearance is required. Ideal Candidate would have knowledge in several of the following areas: packaging manufacturing, glass-to-metal sealing, plating, laser marking and laser welding. Knowledge of Six Sigma and LEAN manufacturing is desired, but not required.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF Engineer: VHF/UHF tunable filter,multicouple
RF Engineer: VHF/UHF tunable filter, multicoupler and packaged subsystems
Responsibilities:
Work with existing engineering department and get up to speed quickly on our tunable filter cavity and low loss (less than 0.2 dB) combiner design approaches. Almost every new contract requires substantial modification to existing designs.
Participate in planning long term product improvements to existing product lines.
Work with Marketing to understand new application requirements and to write product specifications for stand alone filter/multicoupler products and/or packaged subsystems.
Help write formal proposals.
Help in vendor selection & management for key components and assemblies.
Help develop test plans and procedures for testing subsystem designs after contract awards.
Help oversee contract performance while at same time conducting research and development, and providing support to win additional contracts.
Requirements:
Security Clearance:US Citizen , Secret Clearance or ability to qualify for
BSEE & 5 years experience in detailed, leading edge design of low power (receive pre-selectors) and high power (up to 200 watts) tunable passive resonant cavity filter design and extremely low loss combiner networks are a must. Also desired: Experience in design and purchasing various RF switching devices. Experience in specifying, purchasing and testing the other RF components/subassemblies listed above both individually and in a packaged subsystem. Experience with Military Specifications for the above mentioned equipment.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

Senior Filter Design Engineer
Primary Focus:
Conceptualizes, plans, designs, develops and / or analyzes microwave ferrite devices and components for Company and customer telecommunications products.
Provide project leadership and senior technical support as required.
Supports product development from concept through prototype to ensure smooth transition into volume manufacturing.
Interface with Manufacturing to assist with resolving production and technical problems as they occur.
Interface with vendors to evaluate component specifications, design requirements and component quality.
Evaluates vendor delivery performance and develops new vendor sources as needed.
As a member on the Company’s development and marketing team, interface with customers and potential customers on technical issues and in the design phase on new customer products.
Develop new component technology roadmaps and interface this technology into all products.
Execute and Communicate engineering change orders (ECO’s) as required.
Write technical proposals, estimate costs and manage projects from concept to product launch.
Interface and work with the Sales and Marketing Team in responding to Requests for Quotes and opportunities for new business.
Required Skills:
Must have experience with both Waveguide and Coaxial style devices in the (1- 40.0 GHz) frequency range.
Must have Drop-in experience.
The candidate we seek must have extremely strong analytical and design methodology skills.
The candidate should be an experienced user of a variety of diagnostic and microwave evaluation and test equipment and have a working knowledge of AutoCAD.
Must be Proficient in Microwave Theory and must be proficient in the use of computer software (MS Word and Excel).
Experience with other microwave passive devices (Couplers, Mixers, Detectors, etc.) would be a plus.
Qualifications:
Requires Minimum BSEE or Equivalent plus 8{PLS} Years Experience.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

Senior Design Engineer – Ferrite Components
Conceptualizes, plans, designs, develops and / or analyzes microwave ferrite devices and components for Company and customer telecommunications products.
Provide project leadership and senior technical support as required.
Supports product development from concept through prototype to ensure smooth transition into volume manufacturing.
Interface with Manufacturing to assist with resolving production and technical problems as they occur. Interface with vendors to evaluate component specifications, design requirements and component quality.
Evaluates vendor delivery performance and develops new vendor sources as needed.
As a member on the Company’s development and marketing team, interface with customers and potential customers on technical issues and in the design phase on new customer products.
Develop new component technology roadmaps and interface this technology into all products.
Execute and Communicate engineering change orders (ECO’s) as required.
Write technical proposals, estimate costs and manage projects from concept to product launch.
Interface and work with the Sales and Marketing Team in responding to Requests for Quotes and opportunities for new business.
Required Skills:
Must have experience with both Waveguide and Coaxial style devices in the (1- 40.0 GHz) frequency range.
Must have Drop-in experience.
The candidate we seek must have extremely strong analytical and design methodology skills.
Must be an experienced user of a variety of diagnostic and microwave evaluation and test equipment.
Working knowledge of AutoCad.
Candidate must be proficient in Microwave Theory.
Must be proficient in the use of computer software (MS Word and Excel).
Experience with other microwave passive devices (Couplers, Mixers, Detectors, etc.) would be a plus.
Qualifications:
Requires Minimum BSEE or Equivalent plus 6{PLS} Years Microwave Ferrite Design Experience.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF/Waveguide Component Design Engineer
A Microwave Design Engineer having design experience with waveguide assemblies, waveguide filters/diplexers, couplers, coax to waveguide adapters, RF rotary joints, rotary switches, power dividers & combiners in the 1- 40 GHz frequency range is sought to fill out the Engineering team and add design capability to the company’s present RF Passive manufacturing capacity.
The candidate will design and develop wave guide hardware as well as interface with Marketing in responding to RFQ’s, Manufacturing in resolving problems that arise during production, and RF Engineering in the design of integrated assemblies.
Requirements:
BSEE or equivalent with 7-10 years of Microwave Filter design experience is required.
Familiarity with AutoCAD, Microwave design software (Touchstone, FILSYN, AWR Microwave Office, etc.), and Microwave Test Equipment is a must.
Experience in design of other Microwave Passive Devices ( isolators, circulators, mixers, detectors) would be a plus.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

Filter Engineering Team Leader
The Filter Team Leader is overall responsible for the development of products to an agreed time, cost, functionality and hand over of projects to Manufacturing Engineering.
This includes the filter and at time might include the overall system (filter, LNA, mechanical).
In terms of technology the Filter Team Lead is responsible for insuring that technologies employed in product development are sufficiently mature.
Educational skills required:
Technical
Electrical Engineer or B. Sc. (M.Sc. degree is preferred) in related field (Math, Physics) with knowledge of RF design and development methods, test equipment, and manufacturing methods.
Minimum of 6 years of relevant experience is required, or 4 years with M.Sc. degree.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF Filter Design Engineer
The Filter Designer is a member of the local Filter Engineering group.
RF Filter Design Engineer is responsible for the development of products to an agreed schedule, cost, and DFx (Design for Manufacturing, Testing) requirements.
RF Filter Designer transfers products to production following Client Company procedures.
Educational skills required:
Technical
-Electrical Engineer or B. Sc. in related field (Math, Physics)
- with knowledge of RF design and development methods, test equipment, and manufacturing methods.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

SR RF Microwave Engineer (PROJECT MANAGER)
The Filter Team Leader is overall responsible for the development of products to an agreed time, cost, functionality and hand over of projects to Manufacturing Engineering.
This includes the filter and at time might include the overall system (filter, LNA, mechanical).
In terms of technology the Filter Team Lead is responsible for insuring that technologies employed in product development are sufficiently mature.
Educational skills required:
Technical
Electrical Engineer or B. Sc. (M.Sc. degree is preferred) in related field (Math, Physics) with knowledge of RF design and development methods, test equipment, and manufacturing methods.
Minimum of 6 years of relevant experience is required, or 4 years with M.Sc. degree.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

SR RF Microwave Engineer (PROJECT MANAGER)
RF MICROWAVE ENGINEER will be DESIGNING AND LEADING, MANAGING DESIGNING such elements in the L Band to KU band range , high data reate with moderate to wide bandwith, such as frequency converters or receivers and frequency synthesizers or RF & microwave oscillators.
Project management responsibilities include managing project technical design and design team (from requirements through production), project budget and schedule, developing proposals and maintaining client relationships.
REQUIREMENTS:
Technical Experience:
The key things we are looking for are:
1) Extensive up/down converter systems and
2) Circuit level experience through mmWave,
3) Experience with low phase noise hopping synthesizers
Security Clearance- SECRET ( or ability to pass a government security investigation and must meet eligibility requirements for access to classified information)
Citizen: United States
Education: BSEE, MSEE (preferred)
Company Name:  The Couture Group, Inc.
Apply for this Position
 

GSM Systems Engineer-Mobile Platforms
Provides support in the specifications, design and simulation of complex digital cellular systems.
Job Requirements :
MSEE is preferred
plus significant, directly related hands-on experience.
Must possess the ability to apply systems work toward implementation of RF ASIC devices and perform trade-off studies to provide specifications for subsystems.
GSM cellular radio design experience is a plus.
RF PCB design experience and ability to measure various RF parameters with standard equipment is required.
Prefer systems design experience, including receivers, transmitters and synthesizers.
Successful candidate will have a strong communication theory background.
Familiarity with GSM handset design is a plus and knowledge of system simulation using the latest in CAD tools.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF Design Engineer-Mobile Platforms
Responsibilities include design of integrated circuits and integrated module components as part of advanced technology development.
Circuit technologies include, but are not limited to RF switches, power amplifiers, directional couplers-detectors, diplexers, filters, low-noise amplifiers, PA and switch analog/logic controllers.
Device technologies include, but are not limited to AlGaAs/InGaAs/AlGaAs PHEMT, InGaP HBT, Si/SiGe BiCMOS, various IC and module level integrated passive technologies.
Applications:
GSM, EDGE, (W)CDMA, WLAN Switch and Power Amplifier Modules, Front-End Transmit (TX) modules, Single-Package Radios (SPR).
Job Requirements :
MS/PhD in Electrical Engineering with
5/3 years of experience in circuit design,
solid knowledge of semiconductor devices and nonlinear models,
hands-on experience with RF and microwave characterization.
Proficiency in microwave CAD tools (Agilent ADS/IC-CAP/Momentum, Cadence Virtioso/Spectre/APD, SPICE, HFSS).
The candidate is expected to have good understanding of circuit, package and semiconductor device interactions to drive technology innovation and have proven circuit design track record.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF/PA Electrical Engineer-Mobile Platforms
RF or microwave solid state circuit design with expertise in Power Amplifier, bias and control circuits, matching networks, and/or filter/diplexer design.
Responsibilities include planning, design, simulation, verification, and production ramp support of highly integrated, high volume RF Power Amplifier and Front End Module products for wireless systems.
A thorough understanding of impacts and interdependencies of other elements in the RF system is critical to success.
Job Requirements :
Effectively plan and execute RF and analog circuit and IC designs.
Ability to schedule and execute a project to meet critical deadlines within the cost and performance criteria provided by customers and marketing.
Strong circuit simulation skills including HP ADS, Momentum, Cadence SpectreRF, HSPICE and/or PSPICE is necessary.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

Design Engineer -Mobile Platforms
A RF design engineer responsible for the development of commercial PAM/FEM and other related TX products for handset applications.
This position involves various aspects of prototype PAM/FEM development including circuit/EM simulations, IC/PCB design & layouts, prototype testing & optimization, bench characterization and support of transition from prototype design to full volume production.
Projects are expected to be completed on schedule while meeting all critical design goals.
Candidate is expected to implement innovative idea to better current product design and/or resolve complex technical problems
REQUIREMENTS:
A RF design engineer responsible for the development of commercial PAM/FEM and other related TX products for handset applications.
This position involves various aspects of prototype PAM/FEM development including circuit/EM simulations, IC/PCB design & layouts, prototype testing & optimization, bench characterization and support of transition from prototype design to full volume production.
Projects are expected to be completed on schedule while meeting all critical design goals.
Candidate is expected to implement innovative idea to better current product design and/or resolve complex technical problems
Company Name:  The Couture Group, Inc.
Apply for this Position
 

Sr. RF LNA Design Engineer
Sr. LNA Design Engineer is responsible for the development of products to an agreed schedule, cost, and other development requirements.
Sr. Engineer functions as a system level technical lead on development programs, and may direct other engineers and technicians.
The position requires demonstrated skills in many facets of RF amplifier design; especially low noise amplifier, and sub-system design for the cellular and PCS frequency bands.
Familiarity with receiver architectures and current wireless modulation/multiple access schemes (e.g. GSM, CDMA) is a strong plus.
Sr. RF Engineer is a key member of the Active RF development team.
Sr. RF engineer works with R&D to identify new technologies, devices, sources and manufacturers that Company should work with.
Sr. RF Engineer is responsible for keeping up with the latest developments that will shape the Low Noise front-end design in telecommunication industry.
The Sr. RF Engineer is expected to help advance the teams overall technical competence in active RF design.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF LNA Design Engineer (Junior)
LNA Design Engineer is responsible for the development of products to an agreed schedule, cost, and other development requirements.
The position requires skills in many facets of RF amplifier design; especially low noise amplifier, and sub-system design for the cellular and PCS frequency bands.
Familiarity with receiver architectures and current wireless modulation/multiple access schemes (e.g. GSM, CDMA) is a strong plus.
LNA engineer develops new products, characterizes new devices, and conducts Design Verification Testing prior to manufacturing release.
Educational skills required:
Technical
B. Sc. Required (M. Sc. is preferred) in related field (Math, Physics) with knowledge RF product design and development methods, RF test equipment, and manufacturing methods.
Company Name:  The Couture Group, Inc.
Apply for this Position
 

RF Engineer
High technology firm located in central Mississippi is currently seeking experienced RF Engineers with background in antenna design and testing. Ham radio experience desired. Engineer positions require a minimum BSEE and 2{PLS} years of design experience. Security clearance is not required at this time, but must be U.S. citizen.
Company Name:  Charles Stark Draper Laboratory
Apply for this Position
 

RF Communications System Lead Engineer
Draper Laboratory is a not-for-profit, independent research institution that incorporated out of MIT. Draper has the freedom to work on problems that are too risky or too early to attract commercial industry. After demonstrating that a system solution is feasible, we complete our mission by transitioning the technology to industry for volume production.
Descriptions & Responsibilities:
The candidate will lead in the analysis, design, simulation, fabrication, integration and field test of advanced RF / microwave circuits and systems for communications, navigation and sensor applications. Responsibilities include providing system engineering and technical direction to multiple ongoing projects; system concept development for translating raw ideas into program opportunities; conceptualization and conduct of innovative R&D to grow company-wide technical capabilities; technical mentoring / oversight of RF circuit design engineers; and presentation of proposed technology advances to management and external customers. The candidate will serve equally as a key technical team contributor and as a leader providing direction to teams of high-caliber engineers. The ability to bring energy, create focus, build enthusiasm and engender cooperation on multi-disciplinary, technically challenging developments is essential. At varying times the candidate will need to be technical leader, poised presenter, and confident marketer.
Education & Experience Required:
MSEE / Ph.D. or equivalent degree(s) and ten years experience in both direct hands-on lab work in advanced technologies and effective leadership in both formal and informal roles. Technical expertise is vital in areas of: RF / microwave circuit design (200 MHz to 6 GHz); modulation and coding; communications theory; system performance analysis; modern analog, RF / Microwave and communication system design CAD tools (e.g. Agilent ADS, HFSS, Spice, MATLAB / SIMULINK); and adaptive signal processing. Demonstrated skills in innovation and collaboration are a must, and the capacity to influence & inspire others is essential.
Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
Company Name:  Charles Stark Draper Laboratory
Apply for this Position
 

DRO Engineer microwave RF
The suitable candidate will have at least 3 years of component level design experience built on solid design principles which include the following disciplines – RF and Microwave and Oscillator theory. Proficiency in various oscillator design topologies would be advantageous. Candidates with experience designing indirect synthesizers utilizing phase locked oscillators would also be considered.
Experience with ADS, Eagleware or MWO, and AutoCAD desirable; chip and wire experience preferable. The successful candidate should have a well established track record with designs that have been proved in a high volume environment. This position will be responsible for all aspects of the design, as well as, supporting production.
The following capabilities are essential: Low Phase Noise Design, Phase Locking technologies, Modular, as well as, Chip and Wire Design, Microwave Design experience to 26GHz.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Engineering Technician Specialist
Our client is a leading designer and manufacturer of microwave filters components and systems. We have an immediate opening for an engineering technician at our Florida facility. The successful candidate should have experience in:
· Familiar with the operation of general purpose RF electronic test equipment.
· Skilled in the operation of Scalar Network Analyzers and Vector Network Analyzers, Oscilloscopes, power supplies, multi-meters, RF signal sources.
· Able to generate test documentation, engineering change notices, document test data.
· Performs test setups and testing as required of RF mixers, RF amplifiers and other RF components as needed.
· Trains Manufacturing Test personnel in effective and efficient test methods.
· Interprets displays that indicate electronic characteristics such as frequency, band width, VSWR, time delay, phase, distortion, noise figure, 3rd order intercept point, 1 dB compression point, pulse switching times, voltage, inductance, and capacitance
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

 Lumped Element Filter Engineer
We are searching f a RF Filter Designer with at least 3 years experience developing lumped element filters up to 6GHz and/or other microwave filter technologies. This position requires a strong background in the design and construction of high frequency lumped element filters. Responsibilities will include new product development as well as supporting the transfer of existing designs from other facilities. Individuals should display an ability and willingness to support production areas such as machining, assembly and testing.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Mixer Component Engineer microwave
The successful candidate should have a minimum of 3 years of experience designing double and triple balanced mixers up to 30 GHz using lumped element and micro strip technologies. Mixer types being Image Reject, IQ Modulators, Frequency Doublers, and Broadband style Mixers. In addition, the candidate should have experience and capability to simulate mixer designs utilizing engineering software. Willingness to travel to visit with customers or support various Spectrum Microwave operations (travel time would typically be less than 10% of time). Candidate should also have experience supporting a manufacturing operation.
Company Name:  Defense Talent Network Exe Search
Apply for this Position
 

Smartphone RF Design Engineer, Palm Corp
Handset Design
· Study chipsets and new technologies suitable for smartphone
· Research new components, vendors and technologies
· Design subsystems in GSM/ UMTS and CDMA smartphone
· Schematic capture
· Radio and system specification delivery
· Smartphone testing
· Collaborate with other hardware development engineers
· BSEE minimum, MSEE preferred
· Minimum 2 years of RF design experience for a wireless product
· Superior communication skills, both written and verbal
· Strong analytical skills
· Experience in schematic capture and PCB layout
Company Name: AltoSearch Associates
Apply for this Position
 

Senior RF Hardware Engineer
A proven track record (of at least five years) designing, building and testing boardlevel RF hardware including RF Tranceiver Chips, matching networks, and RF front ends (LNAs, PAs, Baluns, and filters).
Experience designing and implementing custom antennas in the unlicensed (ISM)
frequency spectra.
Low power design experience for battery life applications.
Experience using Network Analyzers, Spectrum Analyzers and Signal Generators.
Experience with automated RF Testing.
Experience working with internal engineering teams and customers/marketing to help extract and refine requirements.
Excellent writing and communication skills.
Experience with Orcad (Cadence) Capture and PADS (Mentor Graphics) PowerPCB a plus.
Previous exposure to RFIC designs a plus.
Company Name: Ember Corp
Apply for this Position
 

RF Microwave Production Test Technician
The Endwave Defense Systems currently has opportunities for RF microwave Production Test Technicians in our world class manufacturing facility located in Diamond Springs, California. This is a great location in the beautiful Sierra foothills between Sacramento and Lake Tahoe in Northern California. Our technicians test and tune thin film hybrid millimeter and microwave frequency components.
Job Responsibilities:
• Test, tune, align, troubleshoot and repair RF components and/or sub assys
• Ensures product specifications are accurate
• Reviews specifications and parts lists when new orders are received
• Interfaces with assemblers regarding parts availability
• Sets up test procedures
• Typically identifies problems restricting manufacturing throughout and recommends solutions
• May train other technicians
• May perform design tests for engineering
• Analyze field failures and recommend corrective actions as required
• Ensure that components meet production specification
* Works from schematics, diagrams, written and verbal descriptions, layouts and defined plans to perform testing checkout trouble-shooting functions
Company Name: Endwave
Apply for this Position
 

Principal RF Antenna Design Engineer
Responsible for the design of implantable, body-worn, and external RF antennas for medical implantable communication systems. Perform electro-magnetic simulations and analysis of prototype antenna designs and develop novel concepts to overcome application constraints. Design and verify antenna matching/filtering circuits and other related RF circuits. Implement designs through to build-up of working prototypes. Perform laboratory measurements and analysis using state of the art RF instrumentation to verify simulated models. Define and lead antenna performance measurements at external test facilities. Prepare and present performance results for these antennae designs to department staff and other internal customers. Engage with communication system developers and recommend system level trade-offs for antenna performance, form factor, packaging and radio system constraints. Provide leadership in general RF design practices, as well as specific area of antenna expertise commensurate with experience level. Develop and maintain a current knowledge of industry practices in miniature antenna systems and advances in technology. Participate in reliability testing of overall communication systems. Conduct simulations of path-loss/propagation for antenna systems (RF port-to-RF port) for various instrument and implant/body-worn configurations.
Company Name: Medtronic, Inc.
Apply for this Position
 

Marketing Manager, Public Safety Market
Position Summary: Collaborate with product groups & field sales on key major opportunities (RFPs) as lead or consultant; Plan & execute Consultants Program (5+ seminars / year, monthly newsletters).
• Knowledge of Public Safety markets, via direct experience in law enforcement, fire, or EMS.
• Experience working with both customers, Product Managers & Engineers.
• Contact & influence key industry players in trade associations or customers.
• Able to plan & think both strategically & tactically.
• Technical background.
• Experience training field sales force.
• Experience with long sales cycle markets.
Experienced with Land Mobile Radio (LMR) or IT.
• Experienced working with a manufacturer.
• Attend numirous Market Team and National Trade shows.
• Collaborate on product issues unique to the Public PS markets.
• Participate in key industry trade groups including APCOs Commercial Advisory Council.
• Articulate, excellent listening, writing (position involves much writing in terms of presentations, articles, trip reports, etc), verbal, & presentation skills.
• Personable, good at customer contact & discussions.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
 

Sr. RF/Microwave Modular Subsystem Engineer
Position Summary: Position will be manufacturing support for thin-film RF/Microwave modular subsystems. Role will support the product line by resolving technical issues relating to the testing and tuning of hardware. These issues must be resolved while maintaining a regular production flow.
General computing skills and organization will be needed to document formal changes to hardware by updating AutoCAD drawings and BOMs.
Position will participate in cost reduction initiatives such as Six Sigma and Lean. US Citizenship and the ability to obtain a DOD security clearance is required.
A BS in electrical, mechanical, or a related field and 5+ yrs of applicable experience is required.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
 

RF Engineer
• Design and development of novel resonant cavity structures and circuits including EM simulation and optimization.
• Working with a cross functional team to develop RF/Microwave circuits to drive electrodeless lamp systems.
• Assist applications engineering in the integration of light sources into Televisions.
• Will assist manufacturing in the development of processes for building RF Electrodeless lamps.
Required skills and experience:
• A solid understanding of RF/Microwave circuit fundamentals.
• A good understanding of Electromagnetic theory.
• A familiarity with general RF test equipment.
• Experience with CAD tools such as Microwave Office or ADS as well as electromagnetic simulation tools such as HFSS or Sonnet.
• Knowledge of EMI reduction and FCC testing a plus
• Knowledge of resonant structures including dielectric resonant cavities a plus
• Effective verbal and written communications and interpersonal skills.
Company Name: Luxim Corporation
Apply for this Position
 

Principal Design Eng (Input Filter, (pwr))
Requires detailed knowledge and practical application of:
• Filter design, testing, and applications.
• ADS design software.
• EM simulation software.
• Mathematical filter analysis/design software.
• Testing/tuning of traditional comb line and DR filters, Duplexers, and Ttri-plexers.
• Design trade-offs.
• Passive elements commonly associated with filter products and their implementation into these products in a cost effective manner.
• The design, implementation, and detailed understanding of active RF circuit chain analysis and fundamental design techniques desired, but not required
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
 

Director, RF Power Initiatives
Must currently be in similar role in Semiconductor serving Aerospace / Defense or related industries (listed above) for serious consideration.
Responsibilities:
• Works with field sales and business unit management to maximize growth and profitability of the business.
• Through motivational techniques, delegation of appropriate authority and responsibilities to subordinate managers, directs activities in the area of manufacturing, engineering, materials, sales, health and safety, human resources, information systems, finance and other functions required to operate the business.
• Optimize the utilization of shared resources through coordination with other operations within the company.
• Responsible for the development of objectives for product-line growth. Implements and initiates strategic initiatives and actions to ensure that objectives are met.
• Market growth for RF Power product lines (component level).
• Management and P&L for marketing, sales, development, engineering, manufacturing, customer service and shipments for all RF Power products.
• Develops and implements policies and procedures required to meet continuously improve results against established business objectives.
• Develops and plans a comprehensive operational program in keeping with short and long term goals, schedules, and budgets.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
 

RF Design Engineer-Mobile Platforms
Responsibilities include design of integrated circuits and integrated module components as part of advanced technology development.
Circuit technologies include, but are not limited to RF switches, power amplifiers, directional couplers-detectors, diplexers, filters, low-noise amplifiers, PA and switch analog/logic controllers.
Device technologies include, but are not limited to AlGaAs/InGaAs/AlGaAs PHEMT, InGaP HBT, Si/SiGe BiCMOS, various IC and module level integrated passive technologies.
Applications:
GSM, EDGE, (W)CDMA, WLAN Switch and Power Amplifier Modules, Front-End Transmit (TX) modules, Single-Package Radios (SPR).
Job Requirements :
MS/PhD in Electrical Engineering with
5/3 years of experience in circuit design,
solid knowledge of semiconductor devices and nonlinear models,
hands-on experience with RF and microwave characterization.
Proficiency in microwave CAD tools (Agilent ADS/IC-CAP/Momentum, Cadence Virtioso/Spectre/APD, SPICE, HFSS).
The candidate is expected to have good understanding of circuit, package and semiconductor device interactions to drive technology innovation and have proven circuit design track record.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Sr. RF Design Engineer
This Engineering position will work in RF Filter and Subsystem design with responsibilities for new and existing products. The position requires the ability to perform detail design and analysis, assist in build-up of prototypes, ensure that designs are tested and qualified for production, and see designs through production to ensure highly reliable and cost effective products are produced.
Competence in machine shop tools, such as mill, lathe, drill press and sheet metal break is desireable.
EDUCATION & EXPERIENCE:
Minimum of BSEE degree, MSEE preferred, and 8 years experience, or equivalent. A broad background in RF Filter and subsystem design is highly desirable. Experience in dielectric filters a must. Desktop computer skills are essential for reports and project management (Microsoft Office Suite), for design documentation, and for analysis (Sonnet, Ansoft Designer, HFSS). Ability to debug and critique circuit and systems designs is assumed.
Company Name: Superconductor Technologies
Apply for this Position
 

Senior Antenna/RF Engineer
The Senior Antenna/RF Engineer will be responsible for defining and designing unique antenna
systems for integration in every Apple product. He/she will work in a technology group on next
generation wireless communications products and will be responsible for all antenna designs in
Apple products. He/she will work closely with other cross-functional engineering groups such as
industrial design, product design, EMC, reliability, and all of the computer system project teams.
Experience with RF radio design and implementation is desired. Additionally, the engineer must be
able to interact closely with offshore engineering development and manufacturing partners.
International and domestic travel is likely.
Company Name: Apple Computer, Inc.
Apply for this Position
 

Sr. RF LNA Design Engineer
Sr. LNA Design Engineer is responsible for the development of products to an agreed schedule, cost, and other development requirements.
Sr. Engineer functions as a system level technical lead on development programs, and may direct other engineers and technicians.
The position requires demonstrated skills in many facets of RF amplifier design; especially low noise amplifier, and sub-system design for the cellular and PCS frequency bands.
Familiarity with receiver architectures and current wireless modulation/multiple access schemes (e.g. GSM, CDMA) is a strong plus.
Sr. RF Engineer is a key member of the Active RF development team.
Sr. RF engineer works with R&D to identify new technologies, devices, sources and manufacturers that Company should work with.
Sr. RF Engineer is responsible for keeping up with the latest developments that will shape the Low Noise front-end design in telecommunication industry.
The Sr. RF Engineer is expected to help advance the teams overall technical competence in active RF design.
Company Name: Apple Computer, Inc.
Apply for this Position
 

RF Test Engineer
Design, maintain and upgrade RF and digital test fixtures. Write and validate procedures for board, module and system testing. Candidate must also pa rticipate in verification process and product transition from engineering to production. Suggest test strategies and implementation with guidance from lead engineer. A wide degree of creativity and flexibility is expected. Candidate must have a familiarity with RF and Microwave tuners and tuner test techniques as well as high frequency PCB design concepts and practices. A BSEE and 3 yrs experience is required. Applicants selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.US Citizenship Required
Company Name: microwave-rf-careers-online.com
Apply for this Position
 

Design Engineer -Mobile Platforms
A RF design engineer responsible for the development of commercial PAM/FEM and other related TX products for handset applications.
This position involves various aspects of prototype PAM/FEM development including circuit/EM simulations, IC/PCB design & layouts, prototype testing & optimization, bench characterization and support of transition from prototype design to full volume production.
Projects are expected to be completed on schedule while meeting all critical design goals.
Candidate is expected to implement innovative idea to better current product design and/or resolve complex technical problems
REQUIREMENTS:
A RF design engineer responsible for the development of commercial PAM/FEM and other related TX products for handset applications.
This position involves various aspects of prototype PAM/FEM development including circuit/EM simulations, IC/PCB design & layouts, prototype testing & optimization, bench characterization and support of transition from prototype design to full volume production.
Projects are expected to be completed on schedule while meeting all critical design goals.
Candidate is expected to implement innovative idea to better current product design and/or resolve complex technical problems
Company Name: The Couture Group, Inc.
Apply for this Position
 

PCB Designer
Job Description & Experience:
* 8 years of PWB design experience creating complex designs.
* Strong experience with EDA (Electronic Design Automation) tools.
* Be willing to incorporate complex change notices using manual or CAD methods.
* Train and mentor other employees. Good team player.
* Process schematic/ mechanical data into PADS Power PCB software.
* Experience with RF Communications products and/or complex development programs preferred. Tactical Communications experience is a plus.
Qualifications:
* AA/AS degree or equivalent experience required with a minimum of 8 years relevant industry experience in micowave, secure tactical radio, or government communications systems.
* Experience using 4 and 4 spacing, BGA’s, micro vias, and multi layer boards.
Company Name: RMS, Inc.
Apply for this Position
 

SR RF Microwave Engineer (PROJECT MANAGER)
RF MICROWAVE ENGINEER will be DESIGNING AND LEADING, MANAGING DESIGNING such elements in the L Band to KU band range , high data reate with moderate to wide bandwith, such as frequency converters or receivers and frequency synthesizers or RF & microwave oscillators.
Project management responsibilities include managing project technical design and design team (from requirements through production), project budget and schedule, developing proposals and maintaining client relationships.
REQUIREMENTS:
Security Clearance- SECRET ( or ability to pass a government security investigation and must meet eligibility requirements for access to classified information)
Citizen: United States
Company Name: RMS, Inc.
Apply for this Position
 

Field Engineer I/II
The selected applicant Must be a former Military Communication Technician that will integrate system upgrades, test, troubleshoot, repair, and conduct training on vehicle-mounted and fixed platform communications equipment. Must be familiar with, and be able to read/write/prepare Cable Run Diagrams, Cable Run Sheets, Test Procedures, Arrangement Diagrams, and equipment Outline and Installation Drawings. Candidate will also provide testing support. Should possess excellent oral communications skills and technical writing ability. Applicant will be required to build and maintain complex material tracking reports in both word documents and spreadsheet workbook format.
This position is located in Chesapeake, VA. Relocation assistance is not available. Applicants must currently reside in or state willingness to relocate self to Chesapeake, VA area.
**Applicants may apply by submitting their résumés to the BAE Systems Website @ and referencing job requisition 212470.**
**IMPORTANT NOTE -Your chances of being considered will greatly increase if you have ensured all the below requirements are addressed in your resume.**
* Military RF communication Technician
* Ability to comprehend/modify/create schematics, technical drawings, wire lists.
* HF, VHF, UHF, SHF, SATCOM, and communications experience
* Excellent writing and oral communications skills.
* Technical training skills and experience.
* RF communications experience.
* Able to accept OCONUS travel.
Company Name: BAE Systems
Apply for this Position
 

Analog/RF IC Design Engineer
Seeking an experienced Analog/RFIC Design Engineer. Primary responsibilities include circuit design, physical pattern layout, evaluation board design, and evaluation of analog and RF integrated circuits (ICs).
Qualifications:
• Minimum of 5 years of analog and/or RF IC design, including layout, evaluation board design, and measurement.
Educational Qualifications:
- Ph.D. degree in Electrical Engineering with a concentration in analog and RF IC design, with significant experience in industry through internship or employment
- M.S. degree in Electrical Engineering plus a minimum of 3 years of industry experience in analog and RF IC design, or
- B.S. degree in Electrical Engineering plus a minimum of 5 years of industry experience.
Qualifications:
• Experience with Cadence and other CAD tools including Virtuoso Schematic Editor, Analog Artist, Spectre/Hspice simulators, Virtuoso Layout/Layout XL Editors, Diva/Dracula/Assura/Calibre verification tools.
• Experience in PCB board design.
• Experience in measurement of analog and RF ICs.
• Experience with other software packages such as Microsoft Word, PowerPoint, and Excel.
• Candidate with complete IC chip experience including measurement is highly desirable.
Company Name: Aztec Professional Services
Apply for this Position
 

Applications Engineer
In this role, you will work with the engineering and testing teams to perform first article verification/qualification of RF devices.
Specific tasks will include:
- Develop internal and customer reference boards
- Review customer designs using companies devices
- Manage external suppliers and resources as appropriate
- Write Application Notes and Datasheets
- Train Field Application Engineers as required
- Create presentation material for sales and marketing
- Provide customer support on technical issues and product failures
- Provide system level feedback for the definition of future products
Company Name: Aztec Professional Services
Apply for this Position
 

Senior RFIC Design Engineer
Design and layout of RF circuits such as LNA’s, mixers, VCO’s, variable gain amplifiers and buffer amplifiers.
Working with other members of the engineering team to develop and test products as required by Marketing specifications.
- 4+ years development experience in semiconductor industry, including experience with low phase noise RF design, and microwave design techniques.
- Familiarity with design, characterization, and modeling of custom devices and passive elements.
- Experience with on-chip, package and printed circuit board (PCB) parasitic and design issues.
- Knowledge of common low frequency circuits such as opamps, operational transconductance amplifiers (OTAs) and bias circuits.
- Experience developing circuits for wireless standards.
- Experienced in the use and development of high-Q inductors and varactors.
- Proficient with such tools as Cadence Spectre and SpectreRF, Virtuoso and Assura; also with Microwave design tools ADS, Microwave Office of MMICAD.
- Knowledge of RF Testing is desirable.
- Strong communication skills and demonstrated success in meeting design deadlines.
- A self-starter and team-player, with demonstrated success in a small company environment
Company Name: Aztec Professional Services
Apply for this Position
 

Sr. Principal RF Engineer
The applicant will lead and support RF related advanced development activities. Responsibilities will include link budget and propagation analysis, RF systems design and specification development, detailed RF circuit analysis (IP3 analysis, Noise Figure, etc.), and RF lab and field integration. Also some detailed RF circuit design (Filters, noise cancellation systems, etc.). Antenna simulation capabilities desired. The candidate is expected to grow into technical leadership role to lead activities in RF systems modeling, simulation, design, and implementation. Activities will also include developing proposals, requirement derivation, systems and definition, and interfacing with other engineering disciplines.
Company Name: BAE Systems
Apply for this Position
 

Sales Manager RF Components
The primary responsibility of the successful candidate is to use your technical and marketing skills to help this Southern California based, private RF and Microwave Component developer and manufacturer grow from 9 to 12 Million dollars revenue in the next two years.
The majority of this firm’s sales and marketing effort is domestic with some international.
Client company offers the most extensive product mix in the industry with filters and multiplexers satisfying requirements from 100 kHz to 18 GHz. The products of this firm are currently being utilized in major digital and analog wireless communications systems, test equipment, and military systems.
The successful candidate has the potential to move into top management on a fast track basis
REQUIREMENTS:
US CITIZEN-Ability to qualify for DOD clearance.
The position requires knowledge of the RF microwave component industry (filters, couplers, power dividers, diplexers etc.) and the companys COMMERCIAL AND DEFENSE market.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Sr RF Sys Transmitter Designer
Responsibilities:
• Sr. RF Transmitter design and development for mobile cell phone technology.
• Definition of entire RF engine from antenna to baseband interface
• Alignment of companies devices and 3rd party components (technical terms of delivery, schedule, availability)
• Support the customer with technical expertise, for integration of Hardware, Software and Calibration.
• Support a OEM supplier with L1 integration for Power gain slopes and calibration algorithims.
• Facilitate the co-ordination of Layer 2 documentation.
• Provide support for design of L1 integration for Mobile phone systems
• RFIC concept engineering / system planning
• Providing technical support to customers, including device knowledge of companies and 3rd party products, low level software, and hardware and system design
• Alignment of features and new concepts, assisting internal and external customers with system architecture early in the development cycle
• Working with customers and companies system development engineers during the implementation and debug phases of engine design
• Working with marketing on the creation and alignment of engine roadmap and future feature roadmap
• Alignment of technical interface parameters with 3rd party partners
• Writing system hardware specifications for entire engine covering all relevant timings, interfaces and peripheral blocks (Baseband, Power management unit etc)
• Accumulating customer inputs for future product definition and improvement
• Anticipating customers’ technical issues and needs and communication into development groups
• Completing committed actions on time
• Providing inputs for continuous competition benchmarking
• Providing technical assessments of customer opportunities
• Relationship building with customers and partners engineering, standard bodies and carriers.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Sr. RF Receiver Designer
Responsibilities:
• Sr. RF Receiver design and development for mobile cell phone technology.
• Definition of entire RF engine from antenna to baseband interface
• Alignment of companies devices and 3rd party components (technical terms of delivery, schedule, availability)
• Support the customer with technical expertise, for integration of Hardware, Software and Calibration.
• Support a OEM supplier with L1 integration for Power gain slopes and calibration algorithims.
• Facilitate the co-ordination of Layer 2 documentation.
• Provide support for design of L1 integration for Mobile phone systems
• RFIC concept engineering / system planning
• Providing technical support to customers, including device knowledge of companies and 3rd party products, low level software, and hardware and system design
• Alignment of features and new concepts, assisting internal and external customers with system architecture early in the development cycle
• Working with customers and companies system development engineers during the implementation and debug phases of engine design
• Working with marketing on the creation and alignment of engine roadmap and future feature roadmap
• Alignment of technical interface parameters with 3rd party partners
• Writing system hardware specifications for entire engine covering all relevant timings, interfaces and peripheral blocks (Baseband, Power management unit etc)
• Accumulating customer inputs for future product definition and improvement
• Anticipating customers’ technical issues and needs and communication into development groups
• Completing committed actions on time
• Providing inputs for continuous competition benchmarking
• Providing technical assessments of customer opportunities
• Relationship building with customers and partners engineering, standard bodies and carriers.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
 

RF Engineer, Senior
Responsible for, but not limited to:
• Detailed implementation of system design approach and parameters.
• Development and testing of RF and digital circuits, and or assemblies.
• Data collection and analysis to verify design approach.
• Documentation of work.
• Component selection and verification in concert with BOM build and validation.
• Support fellow engineers in related engineering tasks.
• Support transition of development to production.
• This position would also be responsible for on-going support of existing products by providing technical assistance in support of product update and as well as support of customer special requirements.
Company Name: AMTI
Apply for this Position
 

Senior Hardware/Signal Processing Engineer
Specializing in communications-surveillance products that meld both RF and DSP technologies, Signal Solutions located in Gaithersburg, Maryland has earned a reputation as the leading worldwide supplier of high-quality signal-intercept equipment. Our facility is located in Gaithersburg, Maryland which is between Washington, DC and Frederick, Maryland. We are a short drive from Northern Virginia communities. The Gaithersburg facility is a business unit of DRS Technologies. Employing about 350 people at this facility, this business unit provides creative RF solutions to the Department of Defense and prime contractors. This facility designs and manufactures HF, VHF, and SHF tuners and receivers, demodulators, direction finders and wireless intercept solutions.Being on the frontier of the wireless communication industry, we are poised to exploit and surpass the cutting edge expectations of our customers. We are looking for a talented Senior MTS El Engineer to support our long term program development within a growing business environment.
Company Name: DRS Signal Solutions
Apply for this Position
 

Senior RF Engineer
1) Support System level design and engineering reviews.
2) Provide time/cost inputs to scheduling and budgeting activities.
3) Design analog lumped element and distributed circuits using SPICE, Eagleware, Mathcad and other simulation/design software up to 6 GHz.
4) Interface with configuration control department to keep engineering drawings current and complete.
5) Resolve engineering problems found during production.
6) Produce schematics using Protel Advanced Schematic.
7) Produce PCB layouts and Bill of Materials (BOM) using Protel Advanced PCB software.
8) Specify shielding/EMI compliance requirements for circuits.
9) Analyze prototype circuits using HP 8753D Network analyzer, Spectrum Analyzer, Vector Signal Analyzer and standard bench equipment. Produce hard copies of lab results..
10) Evaluate competitive products at the engineering level to assess Trango product viability and competitive advantages
11) Author and maintain test criteria for circuitry designed.
12) Maintain detailed and organized development notes and lab test results.
13) Assign tasks for lab technician(s).
14) Produce weekly activity reports.
Company Name: Trango Broadband Wireless
Apply for this Position
 

SR RF Engineer
Responsible for the design of complex RF systems, circuitry, and electrical engineering functions in the development of prototype test equipment. Responsibilities include individual development of complex RF designs, measurement algorithms, instrument controls, system integration, troubleshooting and transitioning into production. Should have experience in other areas of design including analog, mixed signal, digital design, and/or software. Position will include review and oversight of work performed by other engineers and assistance with proposal development.
Requires BSEE or equiv. and 4+ yrs of practical engineering concepts gained through practical experience in the design of complex RF systems and circuitry. Expertise in complex RF design includes RF signal generation and measurement, error analysis in system and circuit board/MIMIC levels. Experience should include working with typical RF components such as amplifiers, filters, mixers, receivers, switches, antenuators, detectors, phase shifters, etc. at frequencies beyond 26 GHz (prefer 50+GHz or higher). Must enjoy working in a fast-paced, demanding environment and have a sense of urgency to meet the defined project schedules. Relocation is available for this position.
Company Name: Trango Broadband Wireless
Apply for this Position
 

RF Engineer
BSEE (MSEE prefered) and at least 10 years hands-on experience in RF Circuit Design. Requires expert knowledge of receivers/exciters and synthesizer design, in the frequency range 2 Mhz to 3 Ghz. Working knowledge of military communications radio waveforms, a plus. Strong analytical background to support trade studies, functional requirements definition and performance modeling. Must be experienced applying RF CAE techniques and working in a team environment. Permanent residence at customer facility in Scottsdale, AZ.
* RF Circuit Design and analysis skills
* RF Transmitter and Reciever design experience
* Analog and Digital Communications Knowledge
* Creative Problem-Solving and Innovation Techniques
* RF CAE experience (ADS prefered)
* Communication: Written and Oral
* BSEE plus 10 years' Exp.
Company Name: BAE Systems
Apply for this Position
 

R&D Engineering
The tasks will encompass Hardware, Software, and Firmware expertise on advanced RF Apetures and Receivers (both Digital and Analog). Potential applications include radar systems, jamming systems, electronic warfare/combat, intelligence sensor systems, radar warning systems, and others. Hardware engineers will be expected to evaluate designs for functioanlity and performance. Evaluations can be on schematics and actual hardware of both digital and analog systems. Software engineers must have a working know of the algorithms utilized and be able to model the software for computational analysis. Positions require candidate to be able to handle the computational/theoretical/analytical and practical/hands-on evaluation. Evaluations will be required for initial designs, lab testing of prototype/production hardware, and field demonstations. Technician ability to set up test fixture and test equipment required.
Company Name: MacAulay-Brown, Inc.
Apply for this Position
 

Power Supply Design Engineer
Responsibilities:
• Lead the team in the design of switching power supplies for high efficiency RF power amplifier.
• Apply your switching device expertise to provide recommendations on alternate switch mode architectures.
• Utilize simulation tools to complete designs, breadboard / assemble, debug and conduct engineer tests to verify design performance.
• Work closely with other engineering team members through all phases of design, development, testing and production.
• Provide technical guidance and knowledge-share with peers and subordinates.
Company Name: Aztec Professional Services
Apply for this Position
 

RF Product Design Electrical Engineer
This position is responsible for the planning, evaluation, documentation and development of RF/Microwave components, modules, sub-assemblies and sub-systems for standard and custom products. As such will create detailed designs, generate schematics, develop verification and optimization procedures, and conduct computer simulations, performing worst case analysis. Other duties include:
-Create and or lead the creation of “standard” documentation packages (BOM, Assembly diagrams, Flowsheets, etc.)
-Perform as technical point of contact for throughout bid proposal process, from bid through the completion of the contract
Respond to RFQ/RFPs input & quote information relative to Engineering & Production costs
Provide technical clarifications for bids,
Specification development with customer
Generate of meet materials
Participate in negotiations of waivers and customer specification revisions
Completion failure analyses and corrective actions
Test, tune, and troubleshoot components & assemblies, including:
Amplifiers, filters, mixers, switches and passive devices
Assemblies including various combinations of the above
Oversee and direction the generation of product design drawing by drafting personnel
Company Name: Aztec Professional Services
Apply for this Position
 

Senior RF / PA Device Design Engineer
Responsibilities:
• Lead a team responsible for IC circuit design of high power and high frequency RF power devices (transistors).
• Optimize the circuit design by using linear and nonlinear device models, complete DC/RF analysis, and thermal characterization.
• Evaluate, select, and characterize, as needed, the process (such as GaN, GaAs or LDMOS) to use in fabricating the devices.
• Work closely with process engineers, packaging engineers, and product engineers to translate system level requirements into simulated schematic and physical design layout files using available process rules.
Qualifications:
• MSEE + 10 years (or equivalent) RF / MMIC semiconductor circuit design experience.
• Proven experience in MMIC device design in LDMOS or GaAs. Device power levels of at least 2 watts and operating frequencies of 900MHz or higher.
• Solid working knowledge of associated semiconductor process engineering.
• Familiar with semiconductor device failure analysis techniques.
• Knowledge of high frequency and high reliability semiconductor packaging.
• Knowledge of applicable air interface standards - e.g. IS95 CDMA, W-CDMA.
• Skilled in RF measurement techniques such as - IP3, 1dB compression, ACPR, EVM, etc. and using RF development tools such as ADS.
• Proven record of several completed RF device designs from implementation through production.
• Experience in engineering validation, testing, and debugging.
Company Name: Aztec Professional Services
Apply for this Position
 

RF Staff Electrical Engineer
This position will develop custom RF/Microwave products for military applications. During the development phase, will serve as the project manager responsible for coordinating all aspects of the project to meet technical, schedule, and cost goals. Additionally, will provide system level analysis and design support for R&D Department and B&P support for Phased array and other system level products. Duties include:
• Analyze and design electrical circuits, components, and subsystems to customer requirements; including computer/mathematical modeling, part/material/process selection, mechanical layout and packaging, and test plan development.
• Work with Technician to debug, and optimize prototype circuits and components to meet specification requirements and manufacturing producibility requirements.
• Conduct research and development: evaluate, develop, and document new circuit and/or design techniques.
• Perform routine specification analysis and component design (including creation of a drawing package) using REMEC standard design practices and produce prototype hardware consistent with REMEC manufacturing producibility requirements.
• Evaluate specifications and write proposals; provide cost estimates for projects/products
Company Name: REMEC Defense & Space
Apply for this Position
 

Sr RF Test Engineer
Responsibilities:
• Develop RF test solutions for ICs and wafers using commercially available automated test equipment (ATE). Project tasks may include test plan development, loadboard and probecard schematic design, translating design simulations to tester patterns, test program development for new ICs and wafers, test platform conversions, or test program optimization.
• Development on other device types, such as mixed-signal or digital ICs may be required.
• Integrate and sustain automated test benches and device fixtures designed by Senior-level engineers in order to facilitate validation and characterization testing of company products.
• Support delivery schedules of product to our customers.
• Employ our configuration management tools, including source code control and hardware documentation.
Company Name: Aztec Professional Services
Apply for this Position
 

Sr. RF LNA Design Engineer
The Filter Team Leader is overall responsible for the development of products to an agreed time, cost, functionality and hand over of projects to Manufacturing Engineering.
This includes the filter and at time might include the overall system (filter, LNA, mechanical).
In terms of technology the Filter Team Lead is responsible for insuring that technologies employed in product development are sufficiently mature.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF Filter Design Engineer III
The Filter Designer is a member of the local Filter Engineering group.
RF Filter Design Engineer is responsible for the development of products to an agreed schedule, cost, and DFx (Design for Manufacturing, Testing) requirements.
RF Filter Designer transfers products to production following RFS procedures
Company Name: The Couture Group, Inc.
Apply for this Position
 

Filter Engineering Team Leader
The Filter Team Leader is overall responsible for the development of products to an agreed time, cost, functionality and hand over of projects to Manufacturing Engineering.
This includes the filter and at time might include the overall system (filter, LNA, mechanical).
In terms of technology the Filter Team Lead is responsible for insuring that technologies employed in product development are sufficiently mature.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RTC_F_BCI
Currently recruiting for RF Design Engineers for the North Carolina area. Candidates must have solid RF Circuit Design Principles, Good knowledge of GSM, UMTS air interfaces, 3GPP specifications as well as experience in the Testing practices of such devices.
This position involves design code and unit test of software related to the GSM/ GPRS and EDGE Access software focusing on physical layer support.
Software functionality includes custom ASIC control code such as DSP configuration, RF timing and control, and physical layer state handling. Software development also includes test program development to secure R&D testing and industrialization of Customer platforms.
Company Name: Brosna Communications Int
Apply for this Position
 

Senior MTS

The Senior MTS is capable of creating a set of requirements, and then designs, develops, documents, tests, modifies, and maintains complex hardware within time and cost constraints. This position also provides technical leadership on a regular basis.
Company Name: DRS Signal Solutions
Apply for this Position
 

RF MICROWAVE APPLICATIONS ENGINEER
Coordinate sales activity with commissioned Sales Representatives.
Some travel required to visit customers.
REQUIRED EXPERIENCE:
BSEE.
Excellent verbal and written communication skills required.
Knowledge of filters a plus.
Compensation dependent upon qualifications.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF Microwave CUSTOMER RELATIONS REPRESENTATIVE
Provide customer service to world-wide customers.
Talk to customers on the telephone, process quotations, and process customer purchase orders, expedite work orders, and answer customer questions.
Company Name: The Couture Group, Inc.
Apply for this Position
 

SR RF Microwave Engineer (PROJECT MANAGER)
RF MICROWAVE ENGINEER will be DESIGNING AND LEADING, MANAGING DESIGNING such elements in the L Band to KU band range , high data reate with moderate to wide bandwith, such as frequency converters or receivers and frequency synthesizers or RF & microwave oscillators.
Project management responsibilities include managing project technical design and design team (from requirements through production), project budget and schedule, developing proposals and maintaining client relationships.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RFEngineer:VHF/UHF tunable filter,multicouple
RF Engineer: VHF/UHF tunable filter, multicoupler and packaged subsystems
Work with existing engineering department and get up to speed quickly on our tunable filter cavity and low loss (less than 0.2 dB) combiner design approaches. Almost every new contract requires substantial modification to existing designs.
Participate in planning long term product improvements to existing product lines.
Work with Marketing to understand new application requirements and to write product specifications for stand alone filter/multicoupler products and/or packaged subsystems.
Company Name: The Couture Group, Inc.
Apply for this Position
 

RF/Waveguide Component Design Engineer
Microwave Design Engineer having design experience with waveguide assemblies, waveguide filters/diplexers, couplers, coax to waveguide adapters, RF rotary joints, rotary switches, power dividers & combiners in the 1- 40 GHz frequency range is sought to fill out the Engineering team and add design capability to the company’s present RF Passive manufacturing capacity.
Familiarity with AutoCAD, Microwave design software (Touchstone, FILSYN, AWR Microwave Office, etc.), and Microwave Test Equipment is a must.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Production Planner – Microwave Systems
Company Name: Dusek Network Inc.
Apply for this Position
 

Customer Support System Engineer – Microwave
The Customer Support Engineering position is a developmental position. In this key role, you will provide a variety of support services for our customers. Additionally, you will be involved with a variety of related activities including providing testing services for customers in our new test facility, or at the customer’s facility, working with other Engineering groups validating newly developed measurement system performance, in addition to helping customers to keep their test systems in top condition. The successful candidate will be well positioned for growth into several potential positions including: Systems Engineering, Product Engineering, Key Customer Account Management, Program Management, etc.
Company Name: Dusek Network Inc.
Apply for this Position
 

RF jobs, RF engineering jobs, RF engineer jobs, RFID jobs, LNA jobs, RF engineer job, RF job, RFid job, RF technician jobs, jobs RF,  RF design, career jobs, microwave design, RF IC, resumes jobs, engineering jobs, salary jobs, jobs engineer, microwave antenna, RF antenna, microwave waveguide, RF filter, RF analog, microwave filter, RF circuit, RF transmitter, RF amplifier, careers jobs, microwave power, wireless RF, RF receiver,
RF frequency, RF design, career jobs, microwave design, RF ic, resumes jobs, engineering jobs, salary jobs, jobs engineer, microwave antenna, RF antenna,
microwave waveguide, RF filter, RF analog, microwave filter, RF circuit, RF transmitter, RF amplifier, careers jobs, microwave power, wireless RF, RF receiver, microwave oven, RF frequency, employment jobs, high RF, RF impedance, microwave line, RF power, jobs position, jobs manager, jobs companies, jobs vacancies, employment jobs, high RF, RF impedance, microwave line, RF power, jobs position, jobs manager, jobs companies, jobs vacancies, RF, Microwave, waveguide, waveguide assemblies, waveguide filters, waveguide diplexers, couplers, waveguide adapters, RF rotary joints, rotary switches, power dividers, Touchstone, FILSYN, AWR Microwave Office, filter, multicoupler, L Band, KU band, RF Circuit Design, GSM, UMTS air inteRFaces, 3GPP specifications, Filter Engineering, RF Test, IP3, 1dB compression, ACPR, EVM, ADS, GaN, GaAs, LDMOS, DC/RF analysis, power amplifier, RF CAE, RF components, amplifiers, filters, mixers, receivers, switches, antenuators, detectors, phase shifters, RF IC Design, RFIC Design, HF, VHF, UHF, SHF, SATCOM, CDMA, LNA Design, Agilent ADS/IC-CAP/Momentum, Cadence Virtioso/Spectre/APD, SPICE, HFSS, AlGaAs/InGaAs/AlGaAs PHEMT, InGaP HBT, Si/SiGe BiCMOS

RF engineer, analog jobs, RF design, semiconductor jobs, pcb jobs, career jobs, RF engineering, fpga jobs, senior jobs, telecom jobs, RF electronics, asic jobs, RF engineers, dubai jobs, singapore jobs, uae jobs, electronic jobs, RF manager, wireless jobs, physical jobs, india jobs, dsp jobs, ic jobs, engineering jobs, computer jobs, cdma jobs, resumes jobs, RF ic, RF projects, RF companies, bangalore jobs, electrical jobs, RF hardware, salary jobs, RF testing, vlsi jobs, electronics jobs, RF microwave, RF semiconductor, RF product, jobs engineer, cad jobs, contract jobs, gsm jobs, chennai jobs, RF layout, RF designer, sap jobs, optimization jobs, RF manufacturing, vhdl jobs, design jobs, construction jobs, mechanical jobs, RF transmitter, pune jobs, embedded jobs, technical jobs, it jobs, microwave jobs, RF antenna, RF project, RF position, RF circuit, RF amplifier, RF company, RF analog, careers jobs, hyderabad jobs, manufacturing jobs, RF pcb, employment jobs, uk jobs, planning jobs, RF receiver, mumbai jobs, RF optimization, layout jobs, wireless RF, development jobs, RF electronic, project jobs, RF development, designer jobs, RF planning, freshers jobs, testing jobs, hardware jobs, recruitment jobs, jobs openings, engineers jobs, jobs position, jobs companies, jobs manager, experience jobs, company jobs, jobs vacancies, jobs vacancy

USA jobs, careers, jobs in the USA, USA careers, employment, job postings, jobs by state, top USA jobs, USA job board, North America jobs, jobs in North America,United States jobs, jobs in United States, American Jobs, job site, job board, job bank

www.defensetalent.com

RF Microwave jobs

Microwave Defense Jobs

Microwave Jobs

RF Jobs

RF careers

Microwave careers

Keywords
rf jobs
microwave engineer
rf design engineer
microwave jobs
antenna design engineer
rf microwave engineer
rf microwave jobs
antenna systems engineer
rf communications system
rf communications system engineer
rf lna design
waveguide component design engineer
rf design
rf engineer
rf engineering
microwave engineering
rf circuit design
microwave design
rf engineers
rf engineer jobs
rf engineering jobs
rf design magazine
rf amplifier design
rf filter design
rf system design
rf ic design
rf job
rf engineer job
rf engineer salary
microwave circuit design
rf test engineer
microwave engineering corp
rf power amplifier design
microwave engineering pozar
rf design software
rf pcb design
experimental methods in rf design
microwave engineering corporation
rf antenna design
rf technician jobs
rf coil design
rf systems engineer
rf engineer tampa fl
microwave filter design
microwave antenna design
microwave amplifier design
microwave engineering europe
rf receiver design
microwave engineers
rf engineering job
rf design tutorial
microwave engineering jobs
microwave path design
microwave heating jobs
entry level rf engineer
rf engineer tampa
what is rf engineering
rf system design of transceivers for wireless communications
rf design tools
rf microwave engineering
rf heating jobs
microwave job
kitchen design microwave
rf engineering training
microwave food jobs
rf engineering degree
rf mixer design
what is rf engineer
microwave design software
senior rf engineer
rf board design
microwave and rf design
foundations for microwave engineering
rf engineer interview
rf design jobs
rf transformer design
microwave oven design
rf engineering services
rf food jobs
rf pulse design
rf design guide
rf system design of transceivers
rf design basics
rf engineer job description
rf microwave design
rf transmitter design
practical rf circuit design
microwave communications systems
associate rf engineer
microwave communication system
rf system engineer
rf technician job
rf network design
rf choke design
practical rf system design
rf engineering schools
rf jobs in usa
rf engineering companies
rf engineer resumes
rf engineer training
what is an rf engineer
rf engineer i
rf engineer ii
secrets of rf circuit design
jobs in rf
rf engineering manager
international journal of rf and microwave computer aided engineering
microwave transistor amplifiers analysis and design
rf switch design
rf systems engineering
microwave link design
microwave engineer jobs
rf engineer interview questions
microwave engineering online
rf circuit design theory and applications
rf tech jobs
sr rf engineer
rf design course
microwave communication systems
rf design tool
antenna system design
rf communication system
rf transceiver design
rf attenuator design
rf applications engineer
rf design book
rf design services
rf oscillator design
microwave heating job
rf design line
rf optimization engineer
rf analog design
rf system engineering
rf design engineers
rf engineering school
microwave food job
microwave engineering david pozar
rf application engineer
rf pa design
radio frequency jobs
rf antenna engineer
rf field engineer
encyclopedia of rf and microwave engineering
microwave engineering by david m pozar
microwave power amplifier design
rf engineer position
rf engineering consulting
rf engineer degree
rf filter design software
what is rf design
Keywords
rf transmission line
wireless lna
satellite lna
wireless antenna
resume engineer
resume jobs
waveguide theory
microstrip waveguide
waveguide impedance
waveguide filters
lna amplifier
microwave filter
lna circuit
rf filter
antenna theory
gsm lna
systems wireless
telecom communications
lna filter
antenna balun
waveguide applications
resumes engineer
waveguide filter
waveguide cable
cellular antenna
antenna amplifier
waveguide coupler
antenna band
communications technology
rf switch
coaxial waveguide
rf microstrip
waveguide switch
electronics engineer
rf amplifier
electronic engineer
waveguide attenuation
microwave transmission line
gsm antenna
wireless communications
technology engineer
transmission waveguide
network communications
waveguide calculation
waveguide frequency
salary engineer
rf cable
antenna satellite
microstrip antenna
waveguide loss