Test Technician
4 Year degree or relative exp. in RF Electronics & must possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 RF/Network System Technician
Essential Functions:
• Performs assembly, calibration, and testing of tactical trailer equipment.
• Performs assembly, calibration and product inspection operations on integration related subcomponents.
• Performs set up and tests of RF networks, IP, and serial data networks.
• Identifies and reports material discrepancies to supervisor.
• Provides training in assembling, calibrating, setting up, testing and inspecting electronics related tactical trailer products.
• Performs site installations, repairs, testing and customer training.
• Performs performance, factory, and site acceptance testing.
• Performs other related duties as assigned by management.
• Efficient and courteous interaction with co-workers, representatives from other departments, customers and suppliers, as discussed above.
• High level of dependability with minimal direct supervision.
• Complies with Company and departmental policies, procedures and regulations.
• Maintains quality output and work safely while meeting department production requirements.
• Climbing and working from ladders and stairs.
• Working on top of antenna equipped news trucks and other similarly equipped vehicles or other platforms.
• Working around heavy materials undergoing lifting and moving operations.
• Working with and around power tools and machinery in motion.
• Working around exposed electrical components up to 480 Vac.
• Working around cutting, welding, chemical cleaning/finishing and painting operations.
• Performing assembly tasks in hard to reach and close-quarter areas...
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Microwave Tune Technician / Engineer
Responsible for tuning and alignment of chip and wire technology based microwave and millimeter wave products done with custom test fixtures and utilizing state-of-the-art microwave test systems. Technician works with an integrated assembly that is already built and must be tested and tuned to a particular specification. This hardware contains various components like mixers, modulators, etc. They must be aligned, tested and tuned. To do this someone must be familiar with microwave RF technology and understand things like mismatch, linearity and flatness. They must be familiar with spectrum analyzers, power meters, microscopes, etc. Each unit takes about one day to properly test and tune. That unit is then joined to form a higher order assembly which is then tested by another group of technicians for a higher level of functionality...
Company Name:  Path Technologies, Inc.
Apply for this Position
 

Technician I
1. Reads and interprets prints, blueprints, process manuals, assembly drawings and schematic diagrams.
2. Uses voltmeters, power meters, scalar network analyzers, power supplies, multi meter and other specialized test equipment.
3. Competent in all aspects of module assembly, such as wiring, reflow, epoxy, and hand soldering through hole and surface mount components.
4. Visually inspects modules and subassemblies for proper workmanship and performs continuity and resistance checks prior to turn on. Repairs as needed.
5. Determines proper module operation, tunes it to optimum using shims, solder spikes and RF absorber and records all pertinent data.
6. Tests, aligns and certifies a wide variety of circuit boards and module/system subassemblies prior to installation.
7. Evaluates module / system performance under actual operating conditions.
8. Navigates Local Area Network and ERP system to gain the necessary information to complete work assignments.
9. Completes appropriate paperwork necessary to finish work assignments.
10. Maintains ESD certification.
11. Maintains IPC-610 certification.
12. Maintains regular and predictable attendance.
Education and/or Experience: Associates degree in the electronics field; applicable military schools; or related experience and/or training; or an equivalent combination...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Electronics Field Technician II (SOTM)
This Electronic Field Technician II position involves a combination of moderately complex and repetitive testing, troubleshooting and prototyping duties. Position requires heavy interface with engineers and customers. The position supports field installations of SATCOM equipment at domestic and international locations. Installations will be primarily focused on servo systems, but will also include mechanical upgrades, RF systems and other systems associated with a SATCOM terminal. During non-installation periods, duties will include testing board assemblies, assembling prototypes and performing factory system tests.
The Electronics Field Technician II will primarily be responsible for onsite installations. Installations will occur in the US and at worldwide locations, lasting from 2-8 weeks at a time. Duties will require you to perform a variety of technical tasks to assist engineers with electronic system testing and design. The Electronic Field Technician II will be responsible for removal of existing equipment, installation of new mechanical items and electronics, conducting engineering tests, solving mechanical and electronic problems involved in the operation of the product, and performing customer witnessed sell-off.
The requirements for this position include the following:
Two year electronics degree or equivalent.
Two to four years of related experience
Ability to use electronic theory, analog and digital, (RF knowledge a plus); common laboratory electronic test equipment and to work from schematics and rough sketches.
Multiple language skills a plus
Ability to travel extensively to domestic and international sites
Solid interpersonal skills with customers.
Must be able to climb on antennas and work in an outdoor environment.
Must be able to exert up to 100 lbs. of force occasionally and lift up to 10 lbs. frequently.
Must be able to multi-task.
Associates degree in Electronics or equivalent work experience
Working conditions may include:
• May be working in the lab or on-site in various weather conditions.
• May require some physical effort in the handling of light materials, boxes or equipment.
• May be asked to exert 100 lbs. of force occasionally and be able to lift up to 10 lbs. frequently.
• May be exposed to occasional loud noises.
• Must be able to climb on antennas and work in an outdoor environment...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Technician I
1. Reads and interprets prints, blueprints, process manuals, assembly drawings and schematic diagrams.
2. Uses voltmeters, power meters, scalar network analyzers, power supplies, multi meter and other specialized test equipment.
3. Competent in all aspects of module assembly, such as wiring, reflow, epoxy, and hand soldering through hole and surface mount components.
4. Visually inspects modules and subassemblies for proper workmanship and performs continuity and resistance checks prior to turn on. Repairs as needed.
5. Determines proper module operation, tunes it to optimum using shims, solder spikes and RF absorber and records all pertinent data.
6. Tests, aligns and certifies a wide variety of circuit boards and module/system subassemblies prior to installation.
7. Evaluates module / system performance under actual operating conditions.
8. Navigates Local Area Network and ERP system to gain the necessary information to complete work assignments.
9. Completes appropriate paperwork necessary to finish work assignments.
10. Maintains ESD certification.
11. Maintains IPC-610 certification.
12. Maintains regular and predictable attendance.
Education and/or Experience: Associates degree in the electronics field; applicable military schools; or related experience and/or training; or an equivalent combination.
Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals and in scientific notation. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Computer Skills: To perform this job successfully, an individual should have basic knowledge of the ERP Manufacturing software.
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand and sit. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move more than 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception, Color Vision and Ability to adjust focus...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Electronic Technician II
The Electronic Technician II position will be reponsible for a combination of moderately complex and repetitive testing, troubleshooting and prototyping duties. Position requires heavy interface with engineers and customers. The position supports field installations of SATCOM equipment at domestic and international locations. Installations will be primarily focused on servo systems, but will also include mechanical upgrades, RF systems and other systems associated with a SATCOM terminal. During non-installation periods, duties will include testing board assemblies, assembling prototypes and performing factory system tests.
The Electronics Technician II will primarily be responsible for onsite installations, requiring travel from 10% to 20% of the time. Installations will occur in the US and at worldwide locations, lasting from 2-8 weeks at a time. Duties will require you to perform a variety of technical tasks to assist engineers with electronic system testing and design. The Electronic Technician II will be responsible for removal of existing equipment, installation of new mechanical items and electronics, conducting engineering tests, solving mechanical and electronic problems involved in the operation of the product, and performing customer witnessed sell-off.
The requirements for this position include the following:
o Two year electronics degree or equivalent.
o Two to four years of related experience
o Ability to use electronic theory, analog and digital, (RF knowledge a plus); common laboratory electronic test equipment and to work from schematics and rough sketches.
o Multiple language skills a plus
o Ability to travel extensively to domestic and international sites
o Solid interpersonal skills with customers.
o Must be able to climb on antennas and work in an outdoor environment.
o Must be able to exert up to 100 lbs. of force occasionally and lift up to 10 lbs. frequently.
o Must be able to multi-task.
Working conditions include:
• May be working in the lab or on-site in various weather conditions.
• May require some physical effort in the handling of light materials, boxes or equipment.
• May be asked to exert 100 lbs. of force occasionally and be able to lift up to 10 lbs. frequently.
• May be exposed to occasional loud noises.
• Must be able to climb on antennas and work in an outdoor environment...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 Mechanical Technician I-DF
Works under supervised guidance to perform alignment, calibration and inspection operations on small antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures.
• Performs small antenna assembly operations and product inspections.
• Identifies and reports material discrepancies to supervisor.
• Performs alignments of drive systems components, position readout devices, limit switches and RF reflective surfaces.
• Performs calibrations of antenna control units with respect to position readout, travel speeds and travel limits.
• Performs other related duties as assigned by management.
• Keeps workbenches, machinery, tools, equipment and work area clean and safe.
• Reports time spent performing direct and indirect work in accordance with current labor reporting procedures.
• Provides input to improve products and manufacturing techniques.
• Moves materials by hand, with a fork truck, pallet jack and two-wheel dolly...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is expanding our Acton, Massachusetts location.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly-owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
4 Year degree or relative exp. in RF Electronics & must possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is expanding our Acton, Massachusetts location.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly-owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
4 Year degree or relative exp. in RF Electronics & must possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Engineering Technician
Looking for an engineering technician to support our various engineering development activities and prototype builds. Ability to take instructions from senior engineers, and capture parametric data in support of our prototyping design activities is a must. Looking for a great team player with good communications skills. Knowledge and working experience with RF, analog and digital circuitry is highly desirable. Knowledge of various RF test equipments, such as vector network analyzer, spectrum analyzer, power meter, noise figure meter, signal generators is a must.
Applicant must be capable of obtaining a US Security Clearance...
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Third Shift Supervisor - Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location.
The selected individual will be responsible for the entire 3rd shift operation as well as be a working supervisor, therefore expected to perform the same duties of a Test Technician while managing a staff.
We offer a competitive benefit package. Compensation is commensurate with experience. If you are an individual who has a high interest in working in an exciting and growth-oriented environment, please apply online at www.gdsatcom.com.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
We are currently seeking a 3rd Shift Supervisor with an Associates Degree or relative exp. in RF Electronics & troubleshooting skills down to the component level. This individual should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance.
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Satellite Communications Integration Technician
Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus.
Applicant must be capable of obtaining a US Security Clearance.
 Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Customer Service Technician
Tests, tunes, troubleshoots, repairs, modifies and calibrates developmental and production electronic RF modules and systems, module and system sub-assemblies and circuit boards. Technician III is expected to work with little to no supervision. They are also responsible for helping train and mentor less experienced employees.
Essential Duties and Responsibilities:
1. Reads and interprets prints, blueprints, process manuals, assembly drawings and schematic diagrams.
2. Uses voltmeters, power meters, scalar and vector network analyzers, spectrum analyzers, noise figure meters, oscilloscopes, power supplies and other specialized test equipment.
3. Competent in all aspects of module assembly, such as wiring, reflow, epoxy, and hand soldering through hole and surface mount components. Maintains IPC-A-610 certification.
4. Visually inspects modules and subassemblies for proper workmanship and performs continuity and resistance checks prior to turn on. Repairs as needed.
5. Determines proper module operation, tunes it to optimum using shims, solder spikes and RF absorber and records all pertinent data.
6. Tests, aligns and certifies a wide variety of circuit boards and module/system subassemblies prior to installation.
7. Evaluates module / system performance under actual operating conditions.
8. Analyzes and interprets test data.
9. Evaluates and coordinates repair of returned material.
10. Works with Quality Control and/or engineering to resolve technical problems.
11. Builds and maintains test fixtures as needed.
12. Develops, writes and maintains test procedures.
13. Calibrates some test equipment such as RF loads and cross-guide couplers.
14. Navigates Local Area Network and ERP system to gain the necessary information to complete work assignments.
15. Recommends change to circuitry and/or installation procedures to simplify assembly and maintenance.
16. Serves as team problem solver.
17. Provides input for Engineering Change Requests, as required.
18. Completes appropriate paperwork necessary to finish work assignments.
19. Maintains ESD certification.
20. Other duties, as assigned.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2137 RF Technician I
To carry out the assembly and proof of performance tests of standard feed system products and associated components.
• Perform mechanical assembly of feed components.
• Perform fundamental RF test under guidance of engineering.
• Prepare measurement data package for final processing by lab supervisor
• Ability to work from drawings and procedures.
• Perform other related duties as assigned by management.
• Work to given schedules and complete task in a timely manner.
• Technical writing related to reporting lab and test activities
• Knowledge of use of a computer for word processing, spread sheet work
• Assist other departments
• Maintain assembly tools and test equipment
• Compliance with corporate office and safety policies.
• Compliance with corporate security and proprietary property policies.
• Compliance with engineering design and drafting standards.
• Compliance with RF departmental policies and procedures.
• Follows direction from Production Manager (immediate supervisor) and upper management.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
• High School diploma
• Reasonable experience in mechanical and electrical assembly and repair.
• Must have good mechanical aptitude.
• Must have a working knowledge of electrical circuits.
• Must have basic understanding of how an RF feed system functions.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 Mechanical Technician II-DF
THIS POSITION IS OPEN IN KILGORE, TEXAS
Works under general guidance to perform alignment, calibration and inspection operations on
small antenna products. Follows instructions obtained from production work orders, drawings, policies and
procedures.
Essential Functions:
• Performs small antenna assembly operations and product inspections.
• Identifies and reports material discrepancies to supervisor.
• Performs alignments of drive systems components, position readout devices, limit switches and
RF reflective surfaces.
• Performs calibrations of antenna control units with respect to position readout, travel speeds
and travel limits.
• Performs other related duties as assigned by management.
Efficient and courteous interaction with co-workers, representatives from other departments,
customers and suppliers, as discussed above.
• High level of dependability with minimal direct supervision.
• Complies with Company and departmental policies, procedures and regulations.
• Works during scheduled hours.
• Maintains quality output while meeting department production requirements.
This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc.
An Equal Opportunity/Affirmative Action Employer
We welcome and encourage diversity in our workforce
Experience and Education
• High school graduate or equivalent.
• Two years of experience in a mechanical repair or assembly environment.
• Experience with three (3) or more small antenna products to include control systems set-up and
basic wiring.
Knowledge, Skills, and Abilities
• Demonstrate good mechanical aptitude.
• Ability to interpret assembly drawings and apply them to work operations.
• Ability to comprehend and apply the simple measurement, calibration, alignment and inspection
techniques used in assembling and testing small antenna products.
• Ability to effectively use the tools and equipment previously listed in this job description.
Machines and Equipment Involved:
• Safety glasses, gloves and face shields
• Fork truck, pallet jack and two-wheel dolly
• Standard mechanic’s hand tools such as wrenches, screwdrivers, hammers, etc.
• Mechanical, electrical and air-powered tools, such as drills, impact wrenches, grinders, sanders,
soldering irons, saws, presses, etc.
• Simple specialized mechanical measuring and alignment tools
• Multimeter
• Overhead crane
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 Electrical Technician II-DF
THIS POSITION IS OPEN IN KILGORE, TEXAS
Works under supervised guidance to perform set up, assembly, calibration, test and inspection operations on electronics and electro-mechanical related antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures.
•Performs assembly, calibration, and alignment of small antenna products
•Performs assembly, calibration and product inspection operations on electronics related antenna subcomponents.
•Performs set up and tests of antenna systems and system subcomponents.
•Identifies and reports material discrepancies to supervisor.
•Provides training in assembling, calibrating, setting up, testing and inspecting electronics related antenna products.
•Performs site installations, repairs, testing and customer training.
•Performs other related duties as assigned by management.
•Keeps workbenches, machinery, tools, equipment and work area clean and safe.
•Reports time spent performing direct and indirect work in accordance with current labor reporting procedures.
•Provides inputs to improve products and manufacturing techniques.
•Assists in troubleshooting problems relating to product performance and workflow.
•Basic computer operations.
•Moves materials by hand, with a fork truck, pallet jack, overhead crane and 2-wheel dolly.
•Efficient and courteous interaction with co-workers, representatives from other departments, customers and suppliers, as discussed above.
•High level of dependability with minimal direct supervision.
•Complies with VertexRSI and departmental policies, procedures and regulations.
•Works during scheduled hours.
•Maintains quality output and work safely while meeting department production requirements.
This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc.
An Equal Opportunity/Affirmative Action Employer
We welcome and encourage diversity in our workforce
•High school graduate or equivalent.
•3-5 years of experience in a electronics repair or assembly environment.
•Basic electronic/electrical theory.
•Ability to interpret drawings, wiring diagrams, work orders, performance specifications and test plans, and apply them to work operations.
•Ability to operate various test measurement and diagnostics equipment
•Basic mechanical aptitude.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location.
We offer a competitive benefit package. Compensation is commensurate with experience. If you are an individual who has a high interest in working in an exciting and growth-oriented environment, please apply online at www.gdsatcom.com.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
Associate Degree or relative exp. in RF Electronics & possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Electronics Field Technician II
This Electronic Field Technician II position involves a combination of moderately complex and repetitive testing, troubleshooting and prototyping duties. Position requires heavy interface with engineers and customers. The position supports field installations of SATCOM equipment at domestic and international locations. Installations will be primarily focused on servo systems, but will also include mechanical upgrades, RF systems and other systems associated with a SATCOM terminal. During non-installation periods, duties will include testing board assemblies, assembling prototypes and performing factory system tests. Must have a good understanding of and the ability to troubleshoot digital and analog circuitary at the component level. Must be able to repair the circuit boards rather than discard them. The Electronics Technician II will primarily be responsible for onsite installations, requiring extended travel over 50% of the time. Installations will occur in the US and at worldwide locations, lasting from 2-8 weeks at a time. Duties will require you to perform a variety of technical tasks to assist engineers with electronic system testing and design. The Electronic Technician II will be responsible for removal of existing equipment, installation of new mechanical items and electronics, conducting engineering tests, solving mechanical and electronic problems involved in the operation of the product, and performing customer witnessed sell-off.
The requirements for this position include the following:
Two year electronics degree or equivalent.
Two years of related experience
Ability to use electronic theory, analog and digital, (RF knowledge a plus); common laboratory electronic test equipment and to work from schematics and rough sketches.
Multiple language skills a plus
Ability to travel extensively to domestic and international sites, up to 50% of the time.
Solid interpersonal skills with customers.
Must be able to climb on antennas and work in an outdoor environment.
Must be able to exert up to 100 lbs. of force occasionally and lift up to 10 lbs. frequently.
Must be able to multi-task.
This position requires an Associates degree in Electronics or equivalent work experience.
This individual may be working in the lab or on-site in various weather conditions which may require some physical effort in the handling of light materials, boxes or equipment. This position may be asked to exert 100 lbs. of force occasionally and be able to lift up to 10 lbs. frequently. In this position, you may be exposed to occasional loud noises. You must be able to climb on antennas and work in an outdoor environment.
EOE/AA
M/F/D/V
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Customer Support Technician/Engineer
This position is to provide technical support within the Customer Service Organization (CSO) of GDC4S. Initially the candidate will be primarily working with the Coast Guard Rescue 21 program. CSO performs system monitoring, fault detection/isolation activities for this program after system deployment. The Technicians at the CSO provide ongoing system support including System Administration , Security/Software patching, and software deployments.
Bachelor’s Technology Degree, or Bachelor's Degree in an Information Systems discipline (e.g., IT, System Mgt.), or have an equivalent experience.
The applicant must be willing to work alternate shifts and be on call as needed. Applicant must be capable of obtaining a US Security Clearance.
Experienced technician will work closely with internal and external customers resolving operational issues with GDC4S products. Candidate must be able to work with minimum supervision, and work well within a team in a customer focused environment, as well as interfacing with other departments on a day to day basis.
Longer term, the candidate will provide second and third level technical support on the Rescue 21 program and other programs CSO supports. The candidate will also perform failure and root cause analysis reporting. Technical support includes both operational issues and failure analysis.
Candidate will also work directly with CSO’s Technical Service Representatives, program engineering, and the customer in resolving day to day issues – then loading problem/solutions into CSO’s knowledge database for reuse. A security clearance is required, so you must have or be able to obtain a secret clearance. A higher or lower grade may be established based upon qualifications and experience. Occasional travel may be required.
Experience with troubleshooting, repairing and operation of large-scale integrated systems (radio, comms, networks, wireless and/or computers) an absolute must.
Experience with remote administration of servers, routers and workstations is a must. Desired skills: Network/ Systems/ Database/ Software administration and troubleshooting in a windows environment. Management of WAN and LAN, including performance monitoring/ reporting. Secure communications products a plus.
Solid RF theory a plus. Experience with large area coverage land based radio network. Experience with Microwave and satellite communication a plus. Experience with Software/ firmware based radios a plus.
Good interpersonal/customer communication and organization skills are a necessity.
Direct customer service and/or direct customer interaction a big plus.
Experience with failure and root cause analysis reporting. Remote fault isolation/ fault detection of computer network and radio communication networks.
Experience with system testing, test procedures and test execution plus.
Knowledge of Spectrum software suite. Experience with Windows Perf Mon, SNMP Agent, Terminal Server, Power Quest Deploy Center, CA ArcServe2000, Norton Anti Virus, Quest spotlight, Solarwinds, Cisco Works, Altiris, and Windows System Admin tools a big plus.
Support of DoD or DHS systems is desired.
An active a US Security Clearance a plus.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 Mechanical Technician I
Works under supervised guidance to perform alignment, calibration and inspection operations on small antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures.
• Performs small antenna assembly operations and product inspections.
• Identifies and reports material discrepancies to supervisor.
• Performs alignments of drive systems components, position readout devices, limit switches and RF reflective surfaces.
• Performs calibrations of antenna control units with respect to position readout, travel speeds and travel limits.
• Performs other related duties as assigned by management.
• Keeps workbenches, machinery, tools, equipment and work area clean and safe.
• Reports time spent performing direct and indirect work in accordance with current labor reporting procedures.
• Provides input to improve products and manufacturing techniques.
• Moves materials by hand, with a fork truck, pallet jack and two-wheel dolly.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2152 Electrical Technician I
Works under supervised guidance to perform set up, assembly, calibration, test and inspection operations on electronics and electro-mechanical related antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures.
• Performs assembly, calibration, and alignment of small antenna products
• Performs assembly, calibration and product inspection operations on electronics related antenna subcomponents.
• Performs set up and tests of antenna systems and system subcomponents.
• Identifies and reports material discrepancies to supervisor.
• Provides training in assembling, calibrating, setting up, testing and inspecting electronics related antenna products.
• Performs site installations, repairs, testing and customer training.
• Performs other related duties as assigned by management.
• Keeps workbenches, machinery, tools, equipment and work area clean and safe.
• Reports time spent performing direct and indirect work in accordance with current labor reporting procedures.
• Provides inputs to improve products and manufacturing techniques.
• Assists in troubleshooting problems relating to product performance and workflow.
• Basic computer operations.
• Moves materials by hand, with a fork truck, pallet jack, overhead crane and 2-wheel dolly.
• Efficient and courteous interaction with co-workers, representatives from other departments, customers and suppliers, as discussed above.
• High level of dependability with minimal direct supervision.
• Complies with VertexRSI and departmental policies, procedures and regulations.
• Works during scheduled hours.
• Maintains quality output and work safely while meeting department production requirements.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

2156 RF Technician I
To carry out the assembly and proof of performance tests of standard feed system products and associated components.
• Perform mechanical assembly of feed components.
• Perform fundamental RF test under guidance of engineering.
• Prepare measurement data package for final processing by lab supervisor
• Ability to work from drawings and procedures.
• Perform other related duties as assigned by management.
• Work to given schedules and complete task in a timely manner.
• Technical writing related to reporting lab and test activities
• Knowledge of use of a computer for word processing, spread sheet work
• Assist other departments
• Maintain assembly tools and test equipment
• Compliance with corporate office and safety policies.
• Compliance with corporate security and proprietary property policies.
• Compliance with engineering design and drafting standards.
• Compliance with RF departmental policies and procedures.
• Follows direction from Production Manager (immediate supervisor) and upper management.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
• High School diploma
• Reasonable experience in mechanical and electrical assembly and repair.
• Must have good mechanical aptitude.
• Must have a working knowledge of electrical circuits.
• Must have basic understanding of how an RF feed system functions.
Only qualified candidates will be considered for these positions.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Senior Technician
THIS POSITION IS OPEN IN KILGORE, TEXAS
Works under supervised guidance to perform alignment, calibration and inspection operations on small antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures.
• Performs small antenna assembly operations and product inspections.
• Identifies and reports material discrepancies to supervisor.
• Performs alignments of drive systems components, position readout devices, limit switches and RF reflective surfaces.
• Performs calibrations of antenna control units with respect to position readout, travel speeds and travel limits.
• Performs other related duties as assigned by management.
• Keeps workbenches, machinery, tools, equipment and work area clean and safe.
• Reports time spent performing direct and indirect work in accordance with current labor reporting procedures.
• Provides input to improve products and manufacturing techniques.
• Moves materials by hand, with a fork truck, pallet jack and two-wheel dolly.
This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc.
An Equal Opportunity/Affirmative Action Employer
We welcome and encourage diversity in our workforce
Experience and Education
• High school graduate or equivalent.
• One and a half years of experience in a mechanical repair or assembly environment.
• Efficient and courteous interaction with co-workers, representatives from other departments, customers and suppliers, as discussed above.
• High level of dependability with minimal direct supervision.
• Complies with SATCOM and departmental policies, procedures and regulations.
• Works during scheduled hours.
• Maintains quality output while meeting department production requirements.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Senior Technician
We provide and fully support total IT solutions. Customers can fulfill all of their computing and network needs with CTD’s full line of rugged and semi-rugged computers, network equipment, and peripherals. Using CTD’s technical services, customers can build and implement total solutions that meet their exact needs.
CTD’s rugged and semi-rugged computer products include a full line of handheld, laptop, tablet, and palm-top computers; networking products include servers, storage devices, and wireless networking components; and edge devices include displays, workstations, printers, and faxes. CTD’s technical services offerings include systems integration; wireless network design and integration; and worldwide end-to-end life cycle support.
Our customers include all branches of the U.S. Military; public-safety organizations; and commercial field services in the insurance; communication, utilities, transportation, and telecommunications industries worldwide. CTD has approximately 900 employees at facilities in the United States, Canada, Europe, and Asia.
This position is to support work on several major programs with the Build, Integration and Test. Tasks includes support engineers in the generation of documentation, supporting build and testing of hardware. Maintain documentation and history records for equipment in the lab. Able to mutil task. Tasking will involve hands on laboratory testing of prototype computers, documenting test results, checkout, system integration, verification testing, hands on laboratory and field testing, and other tasks assigned by the project leadership. Knowledge of Linux operating systems, C, C++ and database experience desirable. Applicant must be able to apply technical principles, theories, and concepts. Develops solutions to routine technical problems. Design and construct tooling and fixtures to accomplish unique tasks. Independent operation with minimum supervision. Ability to work from verbal and or written instructions. Ability to use computers and software to analyze and manage data or information. Build and support the construction of demonstration hardware.
Organizes data to identify cause/effect relationships and recommends resolution/process improvement. Perform routine/basic preventative maintenance tasks.HS grad plus related Associates degree from Jr. College, Trade School, Mil Tech Training or equivalent and min 5 yrs applicable experience. Previous hands on hardware expereince a plus. No Relocation Assistance available. Applicant must be a US Citizen.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security Clearance.
Applicant must be a US Citizen.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Test Technician
Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location.
This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly-owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc.
IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company.
EOE/AA M/F/D/V
4 Year degree or relative exp. in RF Electronics & must possess troubleshooting skills down to the component level, should be able to utilize a spectrum analyzer, network analyzer and power meter.
Applicant must be capable of obtaining a US Security Clearance.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Network Technician-2115
Provides network support to operational computer networks.
Essential Functions of the Job:
• Assembles and configures network components and associated services.
• Sets up and maintains basic network operations, including assembly of network hardware, and provides assistance to the network administrator.
• Performs network troubleshooting to isolate and diagnose common network problems.
• Upgrades network hardware and software components as required.
• Installs and upgrades and configures network printing, directory structures, software, file services.
• Provides users with network technical support.
• Wiring.
• Performs other related duties as assigned by management.
Non-essential Functions:
• Assists with AS400 operations.
• Assists with end users with PC problems.
This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc.
An Equal Opportunity/Affirmative Action Employer
We welcome and encourage diversity in our workforce
Experience and Education
• High School graduate or equivalent preferred.
• One year PC hardware and software experience.
Ability to relate to users in all areas.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Electrical Technician II - 2152
Works under general guidance to perform set up, assembly, calibration, test and inspection operations on electronics and electro-mechanical related antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures.
• Performs assembly, calibration, and alignment of small antenna products.
• Performs assembly, calibration and product inspection operations on electronics related antenna subcomponents.
• Performs set up and tests of antenna systems and system subcomponents.
• Identifies and reports material discrepancies to supervisor.
• Provides training in assembling, calibrating, setting up, testing and inspecting electronics related antenna products.
• Performs site installations, repairs, testing and customer training.
• Performs other related duties as assigned by management.
• Keeps workbenches, machinery, tools, equipment and work area clean and safe.
• Reports time spent performing direct and indirect work in accordance with current labor reporting procedures.
• Provides inputs to improve products and manufacturing techniques.
• Assists in troubleshooting problems relating to product performance and workflow.
• Basic computer operations.
• Moves materials by hand, with a fork truck, pallet jack, overhead crane and 2-wheel dolly.
Machines and Equipment Involved:
• Volt, ohm and/or amp meter (multimeter).
• Spectrum analyzer, up/down converter, power supplies, signal generator, and other electronics equipment relating to tests and test set up.
• Specialized tooling for assembling cables.
• Standard electrician’s hand tools such as wrenches, screwdrivers, hammers, knock-out punches, etc.
• Mechanical, electrical and air-powered tools such as drills, impact wrenches, grinders, sanders, soldering equipment, heat guns, saws, presses, etc.
• Fork truck, pallet jack, 2-wheel dolly, overhead crane.
• Simple mechanical measuring tools.
• Cleaning liquids such as alcohol and soap solutions.
• Safety glasses, gloves, face shields, safety shoes.
• Computer.
This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Technician I
1.Reads and interprets prints, blueprints, process manuals, assembly drawings and schematic diagrams.
2.Uses voltmeters, power meters, scalar network analyzers, power supplies, multi meter and other specialized test equipment.
3.Competent in all aspects of module assembly, such as wiring, reflow, epoxy, and hand soldering through hole and surface mount components.
4.Visually inspects modules and subassemblies for proper workmanship and performs continuity and resistance checks prior to turn on. Repairs as needed.
5.Determines proper module operation, tunes it to optimum using shims, solder spikes and RF absorber and records all pertinent data.
6.Tests, aligns and certifies a wide variety of circuit boards and module/system subassemblies prior to installation.
7.Evaluates module / system performance under actual operating conditions.
8.Navigates Local Area Network and ERP system to gain the necessary information to complete work assignments.
9.Completes appropriate paperwork necessary to finish work assignments.
10.Maintains ESD certification.
11.Maintains IPC-610 certification.
12.Maintains regular and predictable attendance.
Education and/or Experience: Associates degree in the electronics field; applicable military schools; or related experience and/or training; or an equivalent combination.
Language Skills: Ability to read and comprehend simple instructions, short correspondence, and memos. Ability to write simple correspondence. Ability to effectively present information in one-on-one and small group situations to customers, clients, and other employees of the organization.
Mathematical Skills: Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals and in scientific notation. Ability to compute rate, ratio, and percent and to draw and interpret bar graphs.
Reasoning Ability: Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions. Ability to deal with problems involving a few concrete variables in standardized situations.
Computer Skills: To perform this job successfully, an individual should have basic knowledge of the ERP Manufacturing software.
While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel and reach with hands and arms. The employee is frequently required to stand and sit. The employee is occasionally required to walk; climb or balance; stoop, kneel, crouch, or crawl; talk or hear and taste or smell. The employee must frequently lift and/or move up to 25 pounds and occasionally lift and/or move more than 50 pounds. Specific vision abilities required by this job include Close vision, Distance vision, Peripheral vision, Depth perception, Color Vision and Ability to adjust focus.
Company Name:  General Dynamics C4 Systems
Apply for this Position
 

Field Technical Support Consultant III
Crucial to post sales service delivery, you'll be involved with multi-vendor systems including hardware, software, networking products and operating systems.
Delivering on-site hardware support service to large enterprise and commercial customers, you'll install, configure and repair systems, networks and peripherals.
You'll also run on-site and remote diagnostics and support account managers in a 24/7 environment.
Qualifications:
- Candidate must have mandatory TS/SCI with Lifestyle Polygraph
- Bachelor's (undergraduate)degree or certification in electronics/electrical engineering or commensurate practical experience
- Sound Lotus Notes or Windows knowledge and computing support background
- Technology knowledge(focus on hardware, thorough knowledge in operating systems required)
- Analytical problem-solving skills
- Flexibility
- Excellent communication skills
- Willingness to participate in non-standard working-time models (e.g. shift, call availability, etc.)
- Willingness to work in a field-service job
- Team player: ability and willingness to work with various teams in the support area
- Ability to work independently
- Customer facing skills
- Leadership
- Ownership and negotiating skills.
- Fluency in English and local language
Company Name: Hewlett-Packard
Apply for this Position
 

Senior Engineering Test Technician
Responsible for all custom setups of the RF Test Ranges under direction from the Director of Engineering.
Ensure that all necessary equipment is identified and properly setup to perform test services to satisfy the requirements of engineering and LRIP transitions.
Responsibility as the main customer interface to ensure all requirements are understood and accomplished with the available equipment.
Supervises engineering test personnel in the development, implementation, and support of all aspects of indoor and outdoor testing of antennas and antenna systems to the required specifications and performance standards within the established schedule.
Oversees and operates automatic test equipment and test software. Performs and develops custom-built test fixtures/systems, new product repair, engineering evaluations, and purchase recommendations.
MAJOR RESPONSIBILITIES
A. Supervises daily function of engineering testing on both indoor and outdoor ranges.
B. Reviews and approves all test data to determine if parts are in compliance with specifications.
C. Assists with new engineering designs and tests.
D. Reviews and evaluates new product design specifications, product assembly and component test requirements ensuring technical accuracy and cost efficiency.
E. Conducts timely performance evaluations for all department employees and prepares development plans to expand their skills and experience.
F. Provides test schedule requirements to Operations. Monitors projects and ensures that timetables are met. Advises senior management of delays, problems or changes.
G. Develops design verification and production level test procedures.
H. As required perform qualification programs testing.
I. Maintain all development test documentation
J. Perform other work as assigned by the Director of Engineering.
K. Ensures all test personnel are appropriately trained and understand the test equipment, test procedures and follow all security procedures.
L. Work closely with Operations to ensure that there is a clean production test transition. Act as technical council to production test department and support production test issues that may arise.
M. Supports technical questions/inquiries from customers.
N. Supports Marketing/Sales as required.
O. Performs in house sample testing as required from Engineering or Quality.
P. Generates and/or oversee acceptance test procedures, quality and engineering reports on new programs.
Q. Develops project budgets, schedules and timetables by analyzing engineering project requirements, area workloads, and manpower availability. Monitors projects and ensures that engineering tasks, timetables and budgets are met. Advises senior management of delays, problems or changes.
R. Assist in the development and test of hardware designed and developed under independent Research and Development (IRAD) Programs.
Defense Security Service (DSS)
EDUCATIONAL AND PROFESSIONAL CREDENTIALS
Minimum Associates Degree in Electrical or Electronic Engineering or
15 years of industry experience with some formal course work can be substituted for degree.
Preferred B.S.E.E.
Company Name: The Couture Group, Inc.
Apply for this Position
 

Inteligence Technicians
Work involves support to the 25-Year Automatic Declassification Program. Functions include ordering and retrieval of documents, preparation of documents, document scanning and quality control to create electronic copy, indexing of documents in database for declassification review. Other responsibilities include data entry and tracking of documents. Will be part of a team that maintains data entry production; prepares work to be processed; and inputs data in a classified environment. Required Skills: Active TS/SCI with a Full Scope Polygraph with 4-6 years experience in data entry or administrative setting. Ability to type with speed and efficiency with minimal error. Must demonstrate a serious commitment to accuracy and quality while meeting goals and deadlines. Required to operate routine office equipment. Requires ability to interact with internal and external customers in a manner that reflects a commitment to quality. Must be able to work independently and as part of a team
Company Name: Raytheon
Apply for this Position
 

ESD Characterization & Test Technician
The technician will support engineering activities with respect to ESD such as test, checkout, modification, fabrication and assembly of prototype electro-mechanical systems, experimental design circuitry or specialized test equipment. Applications may include RF, digital and / or logic systems. Works from schematics, diagrams, written and verbal descriptions, layouts or defined plans to perform testing, checkout and trouble-shooting functions.
Performs operational test and fault isolation on systems and equipment.
Assists in determining methods or actions to remedy malfunctions.
Assists in the design, construction, test and checkout of test equipment.
Uses manufacturing, test, development or diagnostic equipment, including, but not limited to, test programs oscilloscopes, signal generators and specialized test apparatus.
The position will work in the ESD Characterization and Test Group of the Quality organization
Requirements
The successful candidate will be expected to train on and then have the primary responsibility for conducting characterization tests such as ESD ( HBM, CDM, MM, IEC-61k).
Writing skills are required as the technician will be generating reports.
The primary responsibility will be to conduct room temperature ESD testing and RF measurements on semiconductor devices using RF ATE equipment.
The ESD and ATE testing requires ability to accurately follow detailed setup instructions (verbal and written), software and hardware selection, verification and calibration procedures.
Prior experience with fundamental Electronics, RF circuits, measurements and concepts is preferred
Company Name: The Couture Group, Inc.
Apply for this Position
 

Engineering Assistant Microwave
Electronic bench technician will test and troubleshoot electronic parts and components ensuring that products meet government and or customer specification.
Requirements6-10 years current and hands-on experience performing tests and troubleshooting of RF Microwave components and subsystems. Able to work with verbal and written instructions. AS Degree and/or military equivalent
Excellent working conditions and equipment along with great benefits
Company Name: Defense Talent Network Exe Search
Apply for this Position
 

Video Technician
NCI Information Systems Inc. in Reston, VA is looking for experienced Senior video Technician who will be required to design, implement and support both video distribution systems and video teleconferencing systems. The support is both installation and maintenance. The candidate should have a strong base in integrating video into existing infrastructure. This includes ATM, IP and voice systems.
Required Skills: The successful candidate must have a Bachelors degree in Computer Science or Electrical Engineering, (experience will be considered in lieu of degree), with five (5) years of direct or closely related experience. In addition, this position will require detailed knowledge of all aspects of video technology including video generation, distribution and display. It will also require current knowledge of ANSI/IEEE formats for analog and digital systems, broadband cable, NTSC/HDTV and ISDN. Qualified candidates will have superior working knowledge and experience to support the base systems. Manage video switches, Fore ATM equipment, PictureTel video conferencing equipment, Lucent 5ESS switching systems (ISDN) including Craftec test set, Canaga Perkins fiber modems, Cisco 2590, Polycom, and Avaya G3 platform Cryptographic devices (KIV, KG, DES).
Company Name: NCI
Apply for this Position
 

Field Technician II
RESPONSIBILITIES
Our tough and talented Field Technicians are asked to:
· Isolate and resolve complex issues at the BTS cell sites with patience and ease
· Conduct routine preventative maintenance to insure equipment is up to par in case of emergency
· Collaborate with equipment vendors, T-Mobile Network Operations Center personnel, and members of the RF Design group
· Play a central role in process optimization—in the form of expansions, work orders, site builds, and integrations
· Provide expert advice and coaching to less experienced technicians
QUALIFICATIONS
· Experience or education equivalent of Associate’s degree in communications, navigation, radar, electronics, or computer technology
· Understanding of all components of a GSM network, including T-1 architecture and microwave theory
· Familiarity with RF engineering aspects of cell site construction
· Superb communication skills
· Flexibility to work shifts and on-call as needed
· Clean driving record
· A great attitude
· A healthy dose of problem-solving common sense
Company Name: T-Mobile
Apply for this Position
 

Field Technician I
RESPONSIBILITIES
Our tough and talented Field Technicians are asked to:
· Isolate and resolve complex issues at the BTS cell sites with patience and ease
· Conduct routine preventative maintenance to insure equipment is up to par in case of emergency
· Collaborate with equipment vendors, T-Mobile Network Operations Center personnel, and members of the RF Design group
· Play a central role in process optimization—in the form of expansions, work orders, site builds, and integrations
· Provide expert advice and coaching to less experienced technicians
QUALIFICATIONS
· Experience or education equivalent of Associate’s degree in communications, navigation, radar, electronics, or computer technology
· Understanding of all components of a GSM network, including T-1 architecture and microwave theory
· Familiarity with RF engineering aspects of cell site construction
· Superb communication skills
· Flexibility to work shifts and on-call as needed
· Clean driving record
· A great attitude
· A healthy dose of problem-solving common sense
Company Name: T-Mobile
Apply for this Position
 

Field Support Technician - Iraq
We are looking for Field Support Technicians to work in the Middle East/Iraq or possibly Afghanistan on a 1-year assignment.
Job Description:
Support the Rapid Aerostat Integration Deployment (RAID) program to the Middle-East/Iraq:
- Participate in training in Huntsville , AL prior to deploying to Iraq .
- Support the installation, repair, maintenance and operation of communications and electro-optical equipment.
- Support training of customer personnel on the use and support of the equipment including Aerostat and ground support equipment
Company Name: Aztec Professional Services
Apply for this Position
 

HAWK Missile SMP Systems Technician - Field Engineer II
Responsible for repair, test and checkout of the HAWK System.
Isolates Malfunctions in the major end items to assembly, subassembly and component level.
Performed disassembly, repair, test and assembly operations as required to return the assets to serviceable condition.
Functionally verify that the major items perform to specified standards.
Provide on-site technical assistance.
Participated in on-the-job training (OJT) programs as required, and assists the Saudi Military Section Officer in enforcing safety policies, procedures and standards.
Prepares and submits maintenance reports and technical field reports (TFRs).
Performs other related duties as required or directed by the Section Officer.
Basic Qualifications:
Must have a Minimum of four (4) years experience in troubleshooting, fault isolation, repair, test and checkout of the HAWK System.
Two (2) years of HAWK System experience at a direct support or higher echelon level.
HAWK Phase III Certified Training
Desired Qualifications:
5 plus years of experience with the above qualifications
PATRIOT Experience is a plus
HAWK Phase III Experience is a plus
Company Name: Raytheon
Apply for this Position
 

Patriot Systems Maintenance Technician - Field Engineer II
Provides technical support and advises the Royal Saudi Air Defense Forces on Patriot Intermediate Maintenance matters. Isolates malfunctions in the Patriot System with Intermediate Support Element (ISE) equipment when isolation is not accomplished with Built-in-test equipment (BITE) and other machine aided equipment. Performs repair of the ICC, ECS, RS, CRG , BME, BMC , IFF , AMG , GMT , LRPT AND LS. Functionally verifies that Major End Items (MEI) of equipment perform to specified standards. Installs authorized third echelon equipment modifications. Performs test and System Integration and Check Out (SICO) of modified equipment as required. Provides on site technical assistance. Participates in on the job training programs, and assists the section officer in enforcing safety policies, procedures, and standards. Identifies faulty work practices and demonstrates proper maintenance and troubleshooting techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs). Performs other duties as required or directed by the section officer. Basic Qualifications: Must have successfully completed the Patriot System Intermediate Maintenance Mechanic Course for MOS 27X/94S/916A/918D conducted under the auspices of the U.S. Army Training and Doctrine Command (TRADOC) or an equivalent course of instruction conducted by the Patriot Missile System Contractor. Must have a minimum of four (4) years of field maintenance in troubleshooting, isolating and correcting malfunctions in the Patriot Missile System, specifically the ICC, ECS, RS, IFF , AMG , GMT , LRPT, LS, and CRG using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE). Must be proficient in System Integration and Checkout (SICO). Required Education: Bachelor of Science Degree in Engineering or Applied Science
Company Name: Raytheon
Apply for this Position
 

Patriot Battery Systems Technician - Field Engineer II
Job Description:
Provides technical support and advice the Royal Saudi Air Defense Forces on
Patriot Organizational Maintenance matters. Isolates malfunctions in the Patriot System using automatic
and semi-automatic program maintenance diagnostics, unit self test, and Built-in-test equipment (BITE).
Performs repair of the ICC, ECS, RS, CRG, BMC, IFF, AMG, GMT, LRPT AND LS. Provides technical
assistance in maintaining the Patriot power generation equipment, communications equipment
and assists in missile handling operations as required. Participates in on the job training
programs, and assists the section officer in enforcing safety policies, procedures, and standards.
Identifies faulty work practices and demonstrates proper maintenance and troubleshooting
techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs).
Performs other duties as required or directed by the section officer.
Basic Qualifications:
Minimum of 2 years of direct experience with organizational level maintenance on Patriot Missile Systems
Must have successfully completed the following Courses:
U.S. Army Patriot Operator and System Mechanic Course for MOS; 24T/14E, 140E
or an equivalent course of instruction conducted under the auspices of the
U.S. Army Air Defense School or the Patriot Missile System Contractor.
Demonstrated proficiency in isolating and correcting malfunctions in the Patriot Missile System using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE).
Demonstrated experience with external test equipment including but not limited to the following: Multi-Meter, and Power Meter.
Company Name: Raytheon
Apply for this Position
 

Patriot Systems Maintenance Technician - Field Engineer II
Provides technical support and advises the Royal Saudi Air Defense Forces on Patriot Intermediate Maintenance matters. Isolates malfunctions in the Patriot System with Intermediate Support Element (ISE) equipment when isolation is not accomplished with Built-in-test equipment (BITE) and other machine aided equipment. Performs repair of the ICC, ECS, RS, CRG , BME, BMC , IFF , AMG , GMT , LRPT AND LS. Functionally verifies that Major End Items (MEI) of equipment perform to specified standards. Installs authorized third echelon equipment modifications. Performs test and System Integration and Check Out (SICO) of modified equipment as required. Provides on site technical assistance. Participates in on the job training programs, and assists the section officer in enforcing safety policies, procedures, and standards. Identifies faulty work practices and demonstrates proper maintenance and troubleshooting techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs). Performs other duties as required or directed by the section officer. Basic Qualifications: Must have successfully completed the Patriot System Intermediate Maintenance Mechanic Course for MOS 27X/94S/916A/918D conducted under the auspices of the U.S. Army Training and Doctrine Command (TRADOC) or an equivalent course of instruction conducted by the Patriot Missile System Contractor. Must have a minimum of four (4) years of field maintenance in troubleshooting, isolating and correcting malfunctions in the Patriot Missile System, specifically the ICC, ECS, RS, IFF , AMG , GMT , LRPT, LS, and CRG using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE). Must be proficient in System Integration and Checkout (SICO). Required Education: Bachelor of Science Degree in Engineering or Applied Science
JOB REQUIREMENTS:
Will accept an Associate Degree in Engineering or Applied Science or High School Degree/GED with equivalent job related experience on the basis of two (2) additional years experience for each one (1) year of higher education. Desired Qualifications: 5 plus years of field maintenance in troubleshooting, isolating and correcting malfunctions in the Patriot Missile System, specifically the ICC, ECS, RS, IFF , AMG , GMT , LRPT, LS, and CRG using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE). Must be proficient in System Integration and Checkout (SICO).
Company Name: Raytheon
Apply for this Position
 

Patriot SMP Systems Technician - Field Engineer II
Provides technical support and advises the Royal Saudi Air Defense Forces on Patriot Intermediate Maintenance matters. Isolates malfunctions in the Patriot System with Intermediate Support Element (ISE) equipment when isolation is not accomplished with Built-in-test equipment (BITE) and other machine aided equipment. Performs repair of the ICC, ECS, RS, CRG , BME, BMC , IFF , AMG , GMT , LRPT AND LS. Functionally verifies that Major End Items (MEI) of equipment perform to specified standards. Installs authorized third echelon equipment modifications. Performs test and System Integration and Check Out (SICO) of modified equipment as required. Provides on site technical assistance. Participates in on the job training programs, and assists the section officer in enforcing safety policies, procedures, and standards. Identifies faulty work practices and demonstrates proper maintenance and troubleshooting techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs). Performs other duties as required or directed by the section officer. Basic Qualifications: Must have successfully completed the Patriot System Intermediate Maintenance Mechanic Course for MOS 27X/94S/916A/918D conducted under the auspices of the U.S. Army Training and Doctrine Command (TRADOC) or an equivalent course of instruction conducted by the Patriot Missile System Contractor. Must have a minimum of four (4) years of field maintenance in troubleshooting, isolating and correcting malfunctions in the Patriot Missile System, specifically the ICC, ECS, RS, IFF , AMG , GMT , LRPT, LS, and CRG using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE). Must be proficient in System Integration and Checkout (SICO). Required Education: Bachelor of Science Degree in Engineering or Applied Science .
Company Name: Raytheon
Apply for this Position
 

Patriot Battery Systems Technician - Field Engineer II
Patriot Battery Systems Technician - Field Engineer II
Job Description:
Provides technical support and advice the Royal Saudi Air Defense Forces on
Patriot Organizational Maintenance matters. Isolates malfunctions in the Patriot System using automatic
and semi-automatic program maintenance diagnostics, unit self test, and Built-in-test equipment (BITE).
Performs repair of the ICC, ECS, RS, CRG, BMC, IFF, AMG, GMT, LRPT AND LS. Provides technical
assistance in maintaining the Patriot power generation equipment, communications equipment
and assists in missile handling operations as required. Participates in on the job training
programs, and assists the section officer in enforcing safety policies, procedures, and standards.
Identifies faulty work practices and demonstrates proper maintenance and troubleshooting
techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs).
Performs other duties as required or directed by the section officer.
Basic Qualifications:
Minimum of 2 years of direct experience with organizational level maintenance on Patriot Missile Systems
Must have successfully completed the following Courses:
U.S. Army Patriot Operator and System Mechanic Course for MOS; 24T/14E, 140E
or an equivalent course of instruction conducted under the auspices of the
U.S. Army Air Defense School or the Patriot Missile System Contractor.
Demonstrated proficiency in isolating and correcting malfunctions in the Patriot Missile System using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE).
Company Name: Raytheon
Apply for this Position
 

Radio Communications Test and Repair Technician - Field Engineer II
Performs bench type troubleshooting, fault isolation, repair and test of radio and communications equipment used with the Saudi configured Patriot air defense system. Uses commercial test equipment to input test signal to the Unit Under Test (UUT). Signal traces and makes voltage, current and resistance measurements to isolate the trouble to piece part level. Replaces faulty components and performs functional tests to assure that the UUT conforms to all specifications and standards. Assists Patriot Operator/Maintainer technicians in isolating communications problems in the system as required. Participates in on the job training (OJT) programs, and assists the section officer in enforcing safety policies, procedures and standards. Identifies faulty work practices and demonstrates proper maintenance, troubleshooting and repair procedures and techniques. Provides on-site maintenance assistance as required. Fills out maintenance and supply forms, prepares technical reports and performs other related duties as required by the section officer.
Company Name: Raytheon
Apply for this Position
 

GIS Analyst / GIS Technician
There are several position openings at different skill/experience levels that will work within our NGA Outsourcing Department and are responsible for a full range of GIS Feature Database mapping production activities. The more senior GIS Analyst will do more data analysis, photo interpretation and quality control of other technician production.
All successful applicants will extract vector data from Stereo and Mono imagery at scales ranging from 1:12,000 to 1:100,000 for ingest into the NGA GIFD Database. These TLM, Country GIS and Urban Feature Datasets are created using satellite and commercial imagery along with a variety of ancillary sources such as: JOG s, City Graphics, AFFIF reports, DVOF reports, ADRG s, and CADRG s. Photo interpretation is used to identify features and to populate an extensive list of attribution. Attribution drives symbology for hardcopy plots and adhere to strict customer specifications for end users. Teamwork and communication are crucial to meeting dynamic customer requirements and demands.
Company Name: BAE Systems
Apply for this Position
 

Missile Technician
There are several position openings at different skill/experience levels that will work within our NGA Outsourcing Department and are responsible for a full range of GIS Feature Database mapping production activities. The more senior GIS Analyst will do more data analysis, photo interpretation and quality control of other technician production.
All successful applicants will extract vector data from Stereo and Mono imagery at scales ranging from 1:12,000 to 1:100,000 for ingest into the NGA GIFD Database. These TLM, Country GIS and Urban Feature Datasets are created using satellite and commercial imagery along with a variety of ancillary sources such as: JOG s, City Graphics, AFFIF reports, DVOF reports, ADRG s, and CADRG s. Photo interpretation is used to identify features and to populate an extensive list of attribution. Attribution drives symbology for hardcopy plots and adhere to strict customer specifications for end users. Teamwork and communication are crucial to meeting dynamic customer requirements and demands.
Company Name: BAE Systems
Apply for this Position
 

Sr. Engineering Test Technician
Serves as the lead technical expert on MIDS-LVT at the depot repair facility that performs depot level screening and functional testing at the LRU and SRU level. Will be required to test and troubleshoot the LVT assets, as well as training the government personnel in the correct use of the LVT test equipment (MTATS, temperature and vibration equipment, etc.). The DLS Test Engineer shall also assist and receive directions from the DLS Depot Coordinator in the performance his/her duties. This position is located at a Government site and will require everyday customer interface.
Company Name: BAE Systems
Apply for this Position
 

Process Technician
This is a position in the Operations department to assist with Wafer Fabrication of Resistive Hybrid Circuits. Some Sputtering, Plating, Photolithography and etch work is involved. In addition there will be some assembly and Testing of Passive Components for Microwave and RF Products. Applicant must work closely with manufacturing line and engineering. May need to assist with equipment repairs and some maintenance of equipment. Excellent communication skills, math skills and ability to work somewhat independently to accomplish goals on schedule. Some technical writing will be required.
Company Name: XMA Corporation
Apply for this Position
 

Research Associate/ RF Technician
Individual will contribute to studies and analyses, integration and testing as part of a team. Will provide technician support to RF apertures and receivers testing/evaluation. Specific apertures and receivers are used for intelligence collection, radar and communications systems, and EW.
Understanding and experience with RF, analog and digital design, and lab test equipment desired.
Team will consist of hardware and software engineers. Candidate will provide support to testing, modeling and algorithm analyses. Must be able to communicate and work well with a team. Assist with planning, coordination and execution to include setting up test fixtures, operating equipment, modifying test hardware and software, data collection, and post test analyses.
Test equipment includes but is not limited to signal generators, data collection devices and spectrum analyzers. Work will be accomplished on various apertures, receivers, FPGAs, processors, models and components. Strong math background and ability to perform multiple tasks as needed by the team is desired. Support maintenance of lab facility to include purchasing material, and shipping material for maintenance/repair. Provide facility/ equipment tracking to include labeling (UID) and tracking high value instrumentation.
Company Name: MacAulay-Brown, Inc.
Apply for this Position
 

Sr. SATCOM Analyst / Technician
Successful candidate must possess an in-depth knowledge of the Naval
C4I telecommunications architecture, ashore and afloat, with primary
emphasis on the AN/WSC-6(V) series of Navy SATCOM terminals and the
DSCS.
Candidate must also possess a working knowledge of the Information
Technology for 21st Century (IT-21) initiative, and equipment such as
the AN/FCC-100, TIMPLEX, associated base-band equipment (Shipboard
and Ashore), Modems (CQM-28, 1030B) and cryptographic equipment.
Candidate will serve as an Engineering Technical advisor, providing
planning and management support functions to include preparation of
briefing materials, reports, studies and development of project files
and databases. In addition, this person must be capable of
preparation and review of formal system documentation, development
and maintenance of program plan of action and mile-stones (POA&M) for
program specific activities, review of schedules, available funding,
current acquisition strategy, and logistics support for consistency
with program acquisition and deployment activities.
Company Name: MacAulay-Brown, Inc.
Apply for this Position
 

Electronics Technician
Provide direct onsite support for Special Operations Command South (SOCSOUTH). Provide testing, troubleshooting, and maintenance for a variety of communications equipment/systems to include: radio, computer, local area network, fiber optic cable interfaces, communications security equipment, amplifiers, antennas, and ancillary equipment. Position location is Homestead Air Force Reserve Base (ARB), FL. Applicants must be currently residing in or willing to relocate to Homestead, FL area. **Applicants may apply by submitting their resumes to the BAE Systems website @ and referencing this job requisition 212060.**
**Your chances of being considered will greatly increase if you have ensured all the below requirements are addressed in your resume**
* Military Electronics Training & Experience
* Eligible to obtain DoD Security Clearance
* Willingness to travel
* Computer Skills
Company Name: BAE Systems
Apply for this Position
 

Missile Technician
Systems Analyst/Technical Writer to write, review, edit, document, and process SSBN/SSGN operations material. Must be eligible for a high level DoD Security Clearance.
* USN Missile Technician with TRIDENT SWS experience
* High Level Technical Writing Skills/Experience
* Must be eligible for high level DoD Security Clearance
Company Name: BAE Systems
Apply for this Position
 

Messaging Technician
Systems Analyst/Technical Writer to write, review, edit, document, and process SSBN/SSGN operations material. Must be eligible for a high level DoD Security Clearance.
* USN Missile Technician with TRIDENT SWS experience
* High Level Technical Writing Skills/Experience
* Must be eligible for high level DoD Security Clearance
Company Name: Management Technology Inc
Apply for this Position
 

Network Technician
Titan Corporations Systems Integration Sector has an opening for a Network Technician. This individual is responsible for providing support in the operation of computer networks by installing, trouble-shooting, and maintaining computer hardware, software, and other equipment, and supporting end users in the useof such equipment.Duties of this position include but are not limited to:
1. Installing equipment for computer networks including: hardware, software, and other equipment. 2. Trouble-shooting equipment for computer networks including: computerhardware, software, and other equipment. 3. Maintaining equipment for computer networks including: computer hardware,software, and other equipment. 4. Providing support to users of computer networks. 5. Assisting the network administrator(s) in the form of requirementsanalysis, network application design, implementation, problem investigation and resolution, and network application evaluation. 6. A working knowledge of Internet protocols (HTTP, TCP/IP, etc.). 7. The ability to configure and troubleshoot Internet connectivity and security. 8. Performing other duties as assigned.
Company Name: Titan Corporation
Apply for this Position
 

Electronics Test Technician
Titan Corporations Systems Integration Sector has an opening for a Network Technician. This individual is responsible for providing support in the operation of computer networks by installing, trouble-shooting, and maintaining computer hardware, software, and other equipment, and supporting end users in the useof such equipment.Duties of this position include but are not limited to:
1. Installing equipment for computer networks including: hardware, software, and other equipment. 2. Trouble-shooting equipment for computer networks including: computerhardware, software, and other equipment. 3. Maintaining equipment for computer networks including: computer hardware,software, and other equipment. 4. Providing support to users of computer networks. 5. Assisting the network administrator(s) in the form of requirementsanalysis, network application design, implementation, problem investigation and resolution, and network application evaluation. 6. A working knowledge of Internet protocols (HTTP, TCP/IP, etc.). 7. The ability to configure and troubleshoot Internet connectivity and security. 8. Performing other duties as assigned.
Company Name: Harris Corp.
Apply for this Position
 

Semiconductor Lithography Metrology Technician
Located in Manassas VA, this position for a Metrology Technician in the Lithography Area of the Semiconductor Technology Center is responsible for running state of the art lithography equipment to meet production goals. You will crosstrain to provide production coverage in other process areas. You will apply process skills to monitor equipment performance, respond to statistical process control issues, debug measurement problems, and take appropriate corrective action. You will write production metrology recipes for CD SEM and optical overlay measurements. You will assist in process development projects, new process implementation, and improvement projects in lithography. You will create and maintain documentation for tool operation.
No relocation assistance is provided with this opportunity. Only local candidates or those open to relocating themselves will be considered.
* ASEET
* Minimum 2 years directly relevant experience which must include Semiconductor Processing
* Ability to undergo Security clearance process to the Secret level
Company Name: BAE Systems
Apply for this Position
 

VTC Technician
VTC Technician include:
* Installation and operation of video teleconference equipment, trouble shooting of LAN based and ISDN based video equipment.
* Provide customer training on new installations.
* On-site technical support during video teleconference calls.
* Test call facilitation.
* Assistance to project management and project engineering .
* United States Citizenship
* Hardware: 2-4 years working knowledge of VTC Systems.
* Education: 4 years equivalent experience can be substituted.
Company Name: BAE Systems
Apply for this Position
 

Maintenance Technician
Responsible for performing functions associated with all manufacturing test operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, circuit boards and completed final assemblies. Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment. Determines and may assist in developing methods and procedures to control or modify the manufacturing test process
Company Name: Aztec Professional Services
Apply for this Position
 

Audio Visual Technical Specialist
* This position is in support of faculty and staff of the customer and serves to provide audio visual (A/V) and video teleconferencing/training technical support and consultation as needed.
* The A/V Technician is responsible for preparation, operation and maintenance of A/V and video-teleconferencing equipment.
* In addition, A/V technician will research resources to expand the organization's A/V, video teleconferencing/teletraining, and technical ability and knowledge.
Company Name: BAE Systems
Apply for this Position
 

Sr. Engineering Test Technician
Description:
Serves as the lead technical expert on MIDS-LVT at the depot repair facility that performs depot level screening and functional testing at the LRU and SRU level. Will be required to test and troubleshoot the LVT assets, as well as training the government personnel in the correct use of the LVT test equipment (MTATS, temperature and vibration equipment, etc.). The DLS Test Engineer shall also assist and receive directions from the DLS Depot Coordinator in the performance his/her duties. This position is located at a Government site and will require everyday customer interface.
Company Name: BAE Systems
Apply for this Position
 

VTC Technician
VTC Technician include:
* Installation and operation of video teleconference equipment, trouble shooting of LAN based and ISDN based video equipment.
* Provide customer training on new installations.
* On-site technical support during video teleconference calls.
* Test call facilitation.
* Assistance to project management and project engineering .
* United States Citizenship
* Hardware: 2-4 years working knowledge of VTC Systems.
* Education: 4 years equivalent experience can be substituted.
Company Name: BAE Systems
Apply for this Position
 

Electronics Technician
Provide direct onsite support for Special Operations Command South (SOCSOUTH). Provide testing, troubleshooting, and maintenance for a variety of communications equipment/systems to include: radio, computer, local area network, fiber optic cable interfaces, communications security equipment, amplifiers, antennas, and ancillary equipment. Position location is Homestead Air Force Reserve Base (ARB), FL. Applicants must be currently residing in or willing to relocate to Homestead, FL area. **Applicants may apply by submitting their resumes to the BAE Systems website @ and referencing this job requisition 212060.**
**Your chances of being considered will greatly increase if you have ensured all the below requirements are addressed in your resume**
* Military Electronics Training & Experience
* Eligible to obtain DoD Security Clearance
* Willingness to travel
* Computer Skills
Company Name: BAE Systems
Apply for this Position
 

Missile Technician
Systems Analyst/Technical Writer to write, review, edit, document, and process SSBN/SSGN operations material. Must be eligible for a high level DoD Security Clearance.
* USN Missile Technician with TRIDENT SWS experience
* High Level Technical Writing Skills/Experience
* Must be eligible for high level DoD Security Clearance
Company Name: BAE Systems
Apply for this Position
 

Electro-Optics Technician
Position Requirements:
· This position requires working various shifts.
.Experience setting up experiments involving optics, opto mechanical components, and electronics.
.Experience with optical and electronic instrumentation such as oscilloscopes, multimeters, spectrum analyzers, pulse generators, and spectrometers.
.Experience with ladar, interferometry, telescopes, infrared optics and sensors, lasers, cameras, data acquistion, RF circuits, and high voltage electronics desired.
.Experience working with LabView, VxWorks, Matlab, general software applications, etc.
.Requires additional knowledge of electronics, optics, physics, math, computers, etc.
Company Name: BAE Systems
Apply for this Position
 

Electronics Test Technician
Responsible for performing functions associated with all manufacturing test operations, including working with engineers in set-up and calibration tasks, as well as performing rework and quality testing related to the production of parts, components, circuit boards and completed final assemblies. Uses sophisticated programs to collect and evaluate operating data to conduct on-line adjustments to products, instruments, or equipment. Determines and may assist in developing methods and procedures to control or modify the manufacturing test process.
Associates Degree in Electronics Technology (or Military equivalent) required.
The successful candidate must be ambitious, self-motivated, reliable and responsible. Candidates must be able to work well in a team environment and desire future growth.
The successful candidate must be computer literate and able to read complex schematic drawings.
Experience with test equipment (Spectrum Analyzers, Network Analyzers, Oscilloscopes, Power Meters, DMMs, etc) is a must.
Must also have experience with RF/Analog circuitry or experience with complex Digital circuitry. Ability to test and troubleshoot to component level.
LabView experience a plus.
Background in radio communications a plus.
Company Name: Harris Corp.
Apply for this Position
 

Messaging Technician
Experience in maintenance and support of the Exchange messaging environment as well as the daily administration functions (2 years minimum)
Provide training and knowledge transfer to other members of the ACC NOSC team and occasionally to NCC personnel
MCP in MS Exchange 5.5 or 2000
Experience with MS Exchange, Active Directory and Defense Messaging Systems (2 years minimum)
Planning a migration to next version of Exchange and the integration with Active Directory
DNS and W2K
Company Name: Management Technology Inc.
Apply for this Position

 

Semiconductor Lithography Metrology Technician
Located in Manassas VA, this position for a Metrology Technician in the Lithography Area of the Semiconductor Technology Center is responsible for running state of the art lithography equipment to meet production goals. You will crosstrain to provide production coverage in other process areas. You will apply process skills to monitor equipment performance, respond to statistical process control issues, debug measurement problems, and take appropriate corrective action. You will write production metrology recipes for CD SEM and optical overlay measurements. You will assist in process development projects, new process implementation, and improvement projects in lithography. You will create and maintain documentation for tool operation.
No relocation assistance is provided with this opportunity. Only local candidates or those open to relocating themselves will be considered.
* ASEET
* Minimum 2 years directly relevant experience which must include Semiconductor Processing
* Ability to undergo Security clearance process to the Secret level
Company Name: BAE Systems
Apply for this Position

 

Field Technician 7410-1
* Provides routine support for customer owned or leased equipment and products.
* Responsible for moderately complex testing, troubleshooting, installing, calibrating, repairing and modifying computer or electronic equipment and systems.
* Performs on-site installation, preventive maintenance, routine repair, and calibration of company's products and equipment.
* Acts as a liaison with the customer on routine technical and service problems.
* A+ and/or Dell Certification a plus.
* Performs on-site installation, preventive maintenance, routine repair, and calibration of company's products and equipment.
* Acts as a liaison with the customer on routine technical and service problems.
* United States Citizenship
* High school and technical training, plus at least two years of directly related experience.
* US citizenship required; Strongly desires an active Security clearance.
Company Name: BAE Systems
Apply for this Position
 

www.defensetalent.com