Electrical Engineer- Power Supply Design  by General Dynamics C4 Systems

 

Office Manager
This position is as a direct assistant to the Vice President, Washington Operations and provides general support to the Washington office staff.
This position also serves as the office manager for a staff of approximately 8 people.
In general support of the office, the person will maintain office supplies, equipment and other facets of the office, plan and participate in local events and perform other duties as assigned.
As office manager, this individual is also responsible for overseeing the office budget, writing checks for all office expenditures, maintaining bank account and petty cash accounts.
This person will interface with the Accounting Department at BATC to ensure all expenditures are accurately charged.
This position will be involved with activities such as preparing documents, reports and materials for meetings and presentations, when necessary.
This individual will make decisions and/or recommendations in accordance with company policies and procedures.
This person will provide back-up for the executive assistants, and as such will answer and place phone calls, make appointments, maintain itinerary calendars, make travel arrangements and reservations, file and provide organizational support.
Position may serve as facility security officer.
Duties may include special projects and assignments that may be sensitive in nature.
WHAT YOU'LL NEED
Bachelor's Degree plus 4 or more years experience.
In addition to the typical educational and experience requirements, a demonstrated capability to adequately perform the essential functions and responsibilities of the position and exhibit the skills and competencies of the grade level should be considered.
Each higher level degree, i.e. Master's Degree or Ph.D., may substitute for two years of experience. Two years of experience may be substituted for each year of education.
Must have the ability to address and resolve routine matters to conserve the VP's time.
The office has extensive customer and executive level interfaces, and therefore, must be able to greet visitors and customers in a professional manner, representing the VP's office.
Must be able to communicate and interpret the VP's decisions and instructions.
Must compose, edit, type and distribute correspondence and reports when necessary.
Must be a self-initiator and team contributor and must establish and maintain good working relationships with the Executive team and other BATC Organizations.
This position requires an understanding of the Defense/Aerospace community and Congress and requires excellent interpersonal and communications skills with customers.
Must have extensive computer knowledge and excellent administrative/organizational skills.
Must have ability to work with considerable independence and be able to make decisions requiring applications of judgment that are non-routine based on the knowledge of policies, procedures, and operating practices including department-specific tasks.
Must be able and prepared to handle confidential information in a sensitive manner.
Also required is extreme attention to detail and the ability to consistently tie off loose ends in a relatively independent manner.
Candidate must either have facility security experience or be willing to train and pass necessary tests to become facility security officer.
Ability to work in an extremely varied environment and willing to perform wide variety of tasks.
Must have experience in the defense/aerospace community, familiarity with Federal government and protocol.
Excellent interpersonal skills.
Applicants selected will be subject to a Government Security investigation and must meet eligibility requirements for access to classified information.
A current security clearance is preferred.
Company Name: Ball Aerospace & Technologies Corp
Apply for this Position
 

 Space System Engineer
• Update the current GPS III TEMP and coordinate it approval.
• Update and release the Verification Cross Reference matrix (VCRM) for the SYS-800 System Specification after the down selection of a Space Vehicle contractor.
• Develop and release a System Verification Plan and a System Test Plan prior to PDR for the GPS III SV contract.
• Develop a plan for the Demos defined in the TEMP and update and release the System Integration Test Plan (SITP) to agree.
• Lead the TIPT to accomplish the above tasks.
Required Skills:
BS degree in engineering (MS in engineering preferred). Experience with documenting test planning and knowledge of test processes is required. Both SAP and SCI clearances will be required. A minimum of 10 years experience required. Must be a team player and work well with little direct supervision.
Company Name:  Saalex Solutions, Inc.
Apply for this Position
 

Software Engineer
We have immediate openings for experienced software engineers to support our aircraft simulation programs designing and developing aircraft simulation software and simulation models. Tasking includes software design, development, integration and test of real-time flight and proficiency trainers. The incumbent will be working on engineering teams in the development of pilot, copilot and back seat trainer systems. These projects require the building of several training systems and delivering them to various sites around the country.
A BS in Electrical Engineering, Computer Engineering or Computer Science or equivalent experience is required. Experience developing applications for MS Windows or Linux in C/C++ is also required. Three to five years experience with flight simulator or simulation systems is preferred. Knowledge of aircraft mission and avionics systems is desired. Strong written and verbal communication skills are also desired. U.S. Citizenship and the ability to obtain a Secret Security Clearance is required.
Company Name:  J.F. Taylor, Inc.
Apply for this Position
 

ONIR (Overhead Non-imaging Infrared) Scientist
ONIR (Overhead Non-imaging Infrared) Scientist
What You'll Do
Work in a research and development environment, developing new exploitation algorithms for ONIR datasets
What You'll Need
Bachelors degree in Physics or Engineering is strongly preferred, with 2 or more years of related experience. Advanced degree is preferred.
Knowledge of multi-spectral and hyper-spectral data processing
Experience with ENVI toolset and IDL programming language
Must have ACTIVE TS/SCI clearance
In addition to the typical educational and experience requirements, a demonstrated capability to adequately perform the essential functions and responsibilities of the position and exhibit the skills and competencies of the grade level will be considered. Each higher level degree, i.e. Bachelor's or Master´s degree may substitute for two years of experience. Related experience may be considered in lieu of education.
 Company Name:  Ball Aerospace & Technologies Corp.
Apply for this Position
 

Program Manager (Aerospace)
PMs have technical and/or management backgrounds with a minimum of a bachelor's degree and preferably a master's degree.
Preferred fields of study for degree requirements are business, management, engineering, finance, and/or science. Program management experince working ELINT/COMINT software and hardware development and integration programs preferred .
The position requires 10+ yrs experience working in the related program management disciplines with at least two years of experience as a PM or Associate PM.
The related program management disciplines are: Leadership, Personnel Management, Systems Engineering, Software Management, Test and Evaluation Management, Logistics Management, Manufacturing Management, Contract Management, Earned Value Management, Contract Finance Management, Funds Management, and Acquisition Policy.
Responsible for successfully managing all aspects of cost, schedule, and performance for their assigned programs, in accordance with the approved SNC processes. PMs are responsible to achieve and maintain superior contract execution, product delivery, and customer satisfaction, as well as support follow-on business development for their assigned programs/customers.
ESSENTIAL FUNCTIONS:
Responsible to provide the centralized planning, direction, and control required to meet the cost, schedule, and performance goals throughout the life-cycle of their assigned programs.
Monitor, update, and report on Program(s)/B&P/IR&D performance/status in accordance with the Program Management and Planning/Tracking (PMAP/PMAT) and CPPM processes.
Serve as Proposal Manager or key proposal team members for follow-on business or new business opportunities related to their respective program areas. PM is responsible for successfully completing the SNC proposal process to include developing the strategy for successfully completing the proposal, developing all proposal review data for executive management approval, and ensuring the technical, cost, and management requirements of the proposal are met.
Primary representative with the customer on their assigned program(s). Responsible to maintain close contact with the customer organization to ensure the highest possible level of customer satisfaction. Ensure a continuous line of communication is kept open with the appropriate customer representatives to maintain a high level of program status awareness, provide timely recognition and resolution of problems, identify follow-on business opportunities, and prevent surprises.
Participate in contract strategy, development, review and negotiations for their programs in concert with Contracts and the Director of Programs.
Company Name:  Sierra Nevada Corporation
Apply for this Position
 

Senior Mission Assurance Engineer
ATK Space Systems Division located in Beltsville, Maryland is seeking a senior level Mission Assurance Engineer to support its growing spacecraft development programs with the DOD. Successful candidate will work independently to perform a wide range of reliability, system safety, and quality engineering tasks. Responsibilities may include: development of program mission assurance plans based on customer requirements for reliability, safety and quality assurance; review of space hardware and ground support equipment designs and detailed design drawings for inspect ability and compliance with specified mission assurance requirements; coordination or performance of reliability analyses including predications and failure mode and effects analyses; review and approval of selected parts, materials and processes, and coordination of parts list for customer approval; preparation and participation in design, manufacturing and test readiness reviews; management of the project nonconformance reporting system, and recommendations for corrective action; oversight of ATK suppliers providing flight or support hardware and software, including site surveys and source inspection when required. Familiarity with and experience in implementing DOD standards for quality assurance and parts, materials and processes are required. The candidate will frequently interface with project and customer personnel at all levels, and must have the ability to communicate effectively, both orally and in written documentation.
Position requires a thorough knowledge and demonstrated competence in product assurance concepts. BS degree in engineering or a related field with a minimum of 7 years experience is required, with at least 2 years in assignments comparable to those described herein. US citizenship and a current Top Secret is required; SSBI clearance is desired.
Company Name:  ATK Space Systems - Beltsville, MD
Apply for this Position
 

Operations Near Term Planner - Level 3
Candidate will be responsible for mission planning and scheduling of activities performed for the operation of a complex real-time system. Candidate should have experience in de-confliction of system assets and resources for a 24x7 operational system. Candidate coordinates the near-term schedule for an operational system and supports re-planning for contingency and emergency operations. Candidate plans satellite system state of health, communication and payload operations activities. Candidate must have the ability to adjust to changing priorities, multiple demands and crises. Candidate is required to obtain system operations certification. Candidate must have strong analytical skills and demonstrate strength in attention to detail. Familiarity with Unix and Windows environments required, understanding of elementary computer programming concepts preferred. Candidate also participates in the development of engineering processes, methods and tools. Experience in satellite/aerospace operations environment desired...
Company Name: Boeing
Apply for this Position
 

Command and Control Mission Operation Specialist - Level 3
Candidate will be responsible for command and control of satellite and payload systems. Candidate will evaluate vehicle telemetry and commanding to maintain optimal system performance. Candidate will develop and execute contingency operations as needed based on analysis of telemetry data. Candidate will be responsible for the execution of real-time system procedures and de-confliction of system assets and resources. Candidate is required to obtain system operational certification. Candidate must have strong analytical skills and demonstrate strength in attention to detail. Familiarity with Unix and Windows environments required, understanding of elementary computer programming concepts preferred. Candidate also participates in the development of engineering processes, methods and tools. Experience in Aerospace integration and test or satellite operations environment desirable, but not required. Candidate must be a team player. GENERAL DESCRIPTION: Plans and executes mission operations for command, control, communications, computing, intelligence, surveillance, and/or reconnaissance systems. Continuously monitors system performance and controls system elements by executing commands to change system configuration in order to achieve mission objectives. Manages, controls, and coordinates distributed resources (e.g., spacecraft, aircraft, transportation vehicles, etc.) and fixed ground assets (e.g., telemetry, tracking, and control stations and other ground elements required for computing and communications) to support government and commercial customers. Coordinates with management and engineering personnel to develop and maintain operational procedures and tools required to control the system. Analyzes technical data and verifies that system configurations are maintained according to operational requirements...
Company Name: Boeing
Apply for this Position

 Near Term Operations Planner - Level 3
Candidate will be responsible for mission planning and scheduling of activities performed for the operation of a complex real-time system. Candidate should have experience in de-confliction of system assets and resources for a 24x7 operational system. Candidate coordinates the near-term schedule for an operational system and supports re-planning for contingency and emergency operations. Candidate plans satellite system state of health, communication and payload operations activities. Candidate must have the ability to adjust to changing priorities, multiple demands and crises. Candidate is required to obtain system operations certification. Candidate must have strong analytical skills and demonstrate strength in attention to detail. Familiarity with Unix and Windows environments required, understanding of elementary computer programming concepts preferred. Candidate also participates in the development of engineering processes, methods and tools. Experience in satellite/aerospace operations environment desired...
Company Name: Boeing
Apply for this Position
 

Command and Control Mission Operation Specialist - Level 3
Candidate will be responsible for command and control of satellite and payload systems. Candidate will evaluate vehicle telemetry and commanding to maintain optimal system performance. Candidate will develop and execute contingency operations as needed based on analysis of telemetry data. Candidate will be responsible for the execution of real-time system procedures and de-confliction of system assets and resources. Candidate is required to obtain system operational certification. Candidate must have strong analytical skills and demonstrate strength in attention to detail. Familiarity with Unix and Windows environments required, understanding of elementary computer programming concepts preferred. Candidate also participates in the development of engineering processes, methods and tools. Experience in Aerospace integration and test or satellite operations environment desirable, but not required. Candidate must be a team player.
Plans and executes mission operations for command, control, communications, computing, intelligence, surveillance, and/or reconnaissance systems. Continuously monitors system performance and controls system elements by executing commands to change system configuration in order to achieve mission objectives. Manages, controls, and coordinates distributed resources (e.g., spacecraft, aircraft, transportation vehicles, etc.) and fixed ground assets (e.g., telemetry, tracking, and control stations and other ground elements required for computing and communications) to support government and commercial customers. Coordinates with management and engineering personnel to develop and maintain operational procedures and tools required to control the system. Analyzes technical data and verifies that system configurations are maintained according to operational requirements. Position works 12-hour rotating shifts...
Company Name: Boeing
Apply for this Position
 

Sr Systems Engineer II
This is a Senior System Engineering position on the Tigon program. Tigon operates the Consolidated Mission Management and Command and Control functions(CMC) for a satellite ground station. The CMC team is looking for a Flight Director (FD) to oversee real-time satellite command and control shift operations. The operational team consists of Space Vehicle Controller, Process Control Operator and the On-Line Planner. The FD will maintain awareness of the operational environment and ensure the CMC team, other operators, and customer support personnel are aware of the operational situation and requirements. Tasks also include assessing anomalous satellite and ground system telemetry, coordinating proper response procedures, and participating in operational planning and training activities. It is essential that the FD complete Space Vehicle Controller and FD training, maintain certification, and work rotating shifts in a 24/7 environment when necessary.
Required Skills:
-Requires a bachelors degree in a technical subject, or equivalent related work experience, plus a minimum of 6-8+ years of applicable work experience.
-Requires 6+ years of Systems Engineering experience with at least 3 years in operational planning and scheduling.
-Must have demonstrated strong system engineering/analytical/problem solving skills in a team environment.
-Requires demonstrated experience representing the organization as the prime technical contact on contracts and projects.
-Must have successful record of effectively interacting with senior external personnel on significant technical matters, often requiring coordination between organizations.
-Requires demonstrated experience guiding the successful completion of major program milestones, and to perform effectively in a project leadership role as required.
-Must be a US CITIZEN with eligibility to satisfy requirements for an SSBI Security Clearance.
Desired Skills:
-Experience using ReqPro, Clear Case and MS office desired.
-Experience with UNIX and Windows NT desired.
-Satellite operations experience.
Required Education(including Major): BS degree; Aerospace Engineering, Computer Science, ELectrical Engineering, Math-General, Physics-General, Systems Engineering.
Company Name: Raytheon
Apply for this Position
 

Sr. Manufacturing Engineer
Candidate should have a BSME or related degree with 2+yrs DOD or Aerospace exp.
Lean Six Sigma, ISO, FAR standards .
Must be able to prepare work orders detailed manufacturing plans/prod. drawings for DOD Aircraft Structural platforms.
Prioritize tool design, methods, and material procurement.
Skills in CAITV, Autocad and basic Catia usage.
Capabilities in SPC, process mapping,sketch concept, Geometric dimensioning ,tolerance,& root cause analysis.
Coordinate with Process, Quality and upper management.
US citizen, well spoken, Client contact, 10% travel.
Co. prefers Contract to Hire. Will consider straight perm interview. 65K-75K perks. DOE
Full benefits, Relocation available.
Company Name: Confidential
Apply for this Position
 

Member Technical Staff (5785A)
We are seeking a candidate to joing our team as a Member Technical Staff. This will assist with repair of all items of SINCGARS family of radio systems. FSR services to include, but not limited to, providing operational, maintenance and support for tactical communication equipment in Middle East theatre. Maintenance will be performed utilizing the AN/GRM-122 radio test set and other standard items of maintenance equipment. FSR will be responsible for maintaining equipment, to include hardware and software upgrades for this equipment.
ITT Aerospace/Communications Division (ACD) www.acd.itt.com is a world leader in developing wireless networking systems for tactical communications. We are the creator of the core technology used in the world's two largest tactical digitization programs. ACD is a co-creator of the Software Communications Architecture for the Joint Tactical Radio System (JTRS) and is also the provider for America's newest ground to air radios used by the Federal Aviation Administration (FAA).
ITT offers a team-oriented, stimulating learning environment in which the veterans learn from the new generation, and gladly provide mentoring. You will find projects that are fascinating where the only limitation is innovation and creativity. Our leadership style is 'people-oriented'. That's one of the many reasons people who come here rarely leave. We are a CMMI Level III organization; that shows our commitment to process excellence. Note that the work is in a small division of less than 2,000 total employees with a historically stable environment. So it has the feel of a small and intimate organization, though it has the powerhouse resources and systems of the 8 billion dollar Fortune 500 Company that we are.
Take Flight ' Launch your career with ITT
ITT offers an outstanding compensation and benefits package including medical, dental and life insurance, 401(k) with employer match, and a pension plan. In addition, we offer other excellent salaried employee benefits including a relocation assistance, generous number of holidays, vacation days, tuition reimbursement, fitness club assistance and flexible work schedule.
Experience:
BSEE or Military Technical schooling/ ASEE and four years of experience.
3-5 years in the installation, maintenance and operation of large scale communications and/or electronic systems; some experience in training. Experience with Company systems and products; experience with military communications and/or electronic systems is desired. Experience in formal classroom training and training development is an asset.
Broad knowledge of electronic theory, circuitry, mechanics, and assembly techniques. A good knowledge of company and ILS standards, bid estimating procedures and project management skills.
Candidate selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information. U.S. citizenship required.
Company Name: ITT Corporation
Apply for this Position
 

SENIOR PROGRAM MANAGER
BRIEF JOB DESCRIPTION AND QUALIFICATION REQUIREMENTS:
• Responsible for the cost, schedule and
technical performance of multiple programs
including contractual oversight
• Plans, organizes, directs and monitors
Government and commercial programs
• Principle contact between COMPANY and its
customers
• Directs all phases of programs from
inception through completion
• Coordinates change proposals, work
statements and specifications, budgets and
contractual terms and conditions
• BS in engineering discipline – mechanical
engineering a plus
• Minimum of 5-7 years of aerospace/defense
program management experience for both
development and production programs
• PMP certification a plus
• Knowledge of integrated financial/ERP
systems
• Familiarity with military standards, FAR,
and ISO
• Excellent computer skills using Microsoft
Office
• Experience developing and maintaining
schedules using Microsoft Project
• Excellent verbal and written communication skills
• Special Requirement: Selected candidates may be subject to and must comply with all applicable U.S. export control and security regulations which require U.S. citizenship or permanent U.S residency
Company Name: The Couture Group, Inc.
Apply for this Position

Flight Controls Engineer
Several locations to choose from:
We are looking for a Senior Systems Engineer responsible for Flight Control System Development. Join our highly motivated team of engineers designing industry-leading flight control systems for business, regional, military and air-transport aircraft.
System engineering duties will span the entire product lifecycle, from system design (trade studies, architecting, requirements capture, hardware/software design reviews) through system testing (integration, validation, verification, flight test) and onto system support, providing expertise to help our customers (aircraft manufacturer and airlines).
In addition to these technical skills, the candidate must possess excellent communication skills (verbal, written and presentation), enjoy working with a wide variety of people and should have demonstrated the ability to lead a project.
The candidate should possess a background in avionics design and development.
Qualifications
Bachelor's Degree in applicable engineering or science field plus six years related exempt experience.
Company Name: Confidential
Apply for this Position
 

AV-8B Systems Engineer
Serve as a Systems Engineer supporting the integration team for AV-8B Harrier Integrated Product Team (IPT).
Essential Job Functions:
Conduct requirements analysis.
Contribute to design reviews.
Design and execute system evaluation procedures for laboratory and flight integration events.
Characterize and document anomaly reports.
Troubleshoot and verify system and sub-system anomalies.
Perform system data analysis using MUX 1553 raw data and video data.
Log and document integration activities throughout the life cycle of each AV-8B Block Upgrade.
Apply skills in airborne systems installation, maintenance, and troubleshooting to support integration efforts.
Respond to inquiries from the fleet operators.
Support fleet introductions of new and modified systems.
Communicate orally and in writing with the Block Manager, IPT Management, and PMA-257.
Brief aircrew and upper management on integration status of the all AV-8B communications systems.
Required Skills:
Experience and working knowledge of tactical aircraft radar systems and air to air weapons is desired.
The incumbent will be required to utilize PVCS and DOORS requirements management software tools.
Desired Skills:
A working understanding of AV-8B missions and roles.
Company Name: DCS Corporation
Apply for this Position
 

Test Engineer-Flight Test
Provide Scientific Engineering and Technical Analysis Provide the planning, coordination and integration of the Missile Defense Agency (MDA) test resources in support of flight tests for the Ballistic Missile Defense System (BMDS) in support of the Director, Test Resources.
Provide in-house, detailed expertise and coordination on range assets at the various test ranges used in BMDS flight tests.
Advise MDA/DTR in matters pertaining to flight test resources, including raising significant issues, developing recommendations and developing and implementing risk mitigation plans.
Provide technical analysis and assessment as required of flight test infrastructure and proposed improvements.
Review System and Element test documentation as required for accuracy and completeness.
Supports various Working Groups, Integration Task Force’s, and Integrated Product Teams, both internal and external to MDA, as required in support of the Test Resources Directorate’s mission.
Required Qualifications:
5+ years experience in integration, testing, test planning, test execution, configuration control, and fielding for major systems.
B.S. or higher-level degree in a technical discipline (Engineering, Math, Physics, Operations Research, or related discipline required).
Knowledge of MDA BMDS programs
SECRET clearance required. TOP SECRET desired.
Company Name: Enterprise Technology Corporation
Apply for this Position
 

Manager, Strategic Planning & Analysis
We are seeking candidate to provide leadership and coordination of Strategic Planning for A/CD and lead the development of the Strategic and Operating Plans for the Value Center. Support the development of business plans for the Business Areas within A/CD.
Coordinate contributions to and reviews of the Strategic and Operating Plans of the Value Center, interfacing with Business Area leaders and functional managers, as well as Defense Group planning personnel, to provide high quality, high accuracy planning materials to Value Center management and Defense Group.
Ensures that A/CD Strategic Plan is developed in coordination with the Business Areas, functional managers and Defense Group and Strategic Plan objectives and agendas are properly implemented. Acts as the focal point for Division on Defense Congressional Initiatives and the coordinator for the identification and pursuit of suitable acquisitions. Coordinates departmental budget activities. Coordinates the collection and distribution of market and competitive intelligence. Performs other assignments as directed by the Business Development Vice President.
Company Name: ITT Aerospace/Communications Division
Apply for this Position
 

Systems Engineer
Candidate will have expertise in Navigation system design working as a Senior Systems engineer with experience on military or aerospace programs.
Expertise in GPS or Differential GPS system design a plus.
Candidate will evaluate military operational and technical requirements, and develop System and Segment Specifications.
Must have military or aerospace experience developing and documenting system architectures, involving both hardware and software.
Must be experienced in performing trade studies and analyses.
Will oversee prototype development of hardware/software systems, integration and test activities.
Will be responsible for implementing structured systems engineering processes, including preparation and participation in design reviews and other activities.
Matlab experience a plus.
Must have minimum 7+ years working as a Sr. Systems engineer with experience with aerospace or military programs.
Bachelor’s Degree in Electrical Engineering, Aerospace, or Systems Engineering, Masters degree a plus.
Must be eligible to obtain a U.S. "Secret" level Security Clearance
Company Name: Sierra Nevada Corporation
Apply for this Position
 

Aerospace Engineer
SNC is looking for energetic and innovative aerospace engineers to support our expanding efforts in both manned and unmanned Intelligence, Surveillance and Reconnaissance Systems. BS in aerospace engineering required.
Must have at least 5 years of experience. Experience in 3-D CAD tools required, SOLID WORKS preferred.
EDUCATION/EXPERIENCE:
Candidates will have strong knowledge and practical experience in aircraft operations, dynamics, and controls; familiarity with MATLAB, Solidworks; experience with 3D CAD/CAM tools is a must.
Modeling of flexible dynamics (NASTRAN) exposure preferred.
Candidate must have complete familiarity with typical aerospace program design, system integration, produciability, maintainability, stress analysis requirements and procedures.
Candidate must be able to conduct stress analysis on metallic and composite structures.
Bachelor's degree in Mechanical, Aeronautical, Aerospace, desired.
A background in aircraft structural analysis (metallic and composite), static and fatigue testing requirements and analysis, and finite element modeling (FEM) is desired.
Must be capable of applying knowledge toward solving problems of a research nature, and be capable of working alone or with a technical team in a fast paced rapidly changing environment where quick reaction capability (QRC) and rapid prototyping is the norm.
Must have at least five years experience.
Must be able to obtain and maintain a DoD/US Government Security Clearance.
Experience in Computational Fluid Dynamics (CFD) and Finite Element Analysis (FEA) highly desirable. Experience with unmanned air vehicles a plus.
Must be able to work in a highly collaborative, fast paced environment which emphasizes rapid prototyping and fielding of capabilities.
Must be able to attain and maintain a security clearance.
Company Name: Sierra Nevada Corporation
Apply for this Position
 

Security Cleared Professionals - Technology, Engineering, Aerospace, Intelligence
Description
Hot Career Opportunities this Summer! Interview at TECHEXPO's July job fairs for your exciting new position in the defense, intelligence and government services sectors with the nation's top employers including federal agencies and government contractors. Bring many copies of your resume and meet recruiters and hiring managers in July to discover the many opportunities offered in Information Technology, Engineering, Aerospace, Telecom, Project Management, Intelligence, Operations, Homeland Security, Research, & much more.
Wednesday, July 18th from 10am - 4pm
Sheraton Crystal City
1800 Jefferson Davis Highway
Arlington, VA 22202
and
Thursday, July 19th from 10am - 4pm
BWI Marriott
1743 W. Nursery Rd.
Baltimore, MD 21240
Jobs Available Nationwide, Coast to Coast
Admission: Any level of Active Security Clearance issued by the US Federal Government or Military is REQUIRED to attend (or clearance last used within past 24 months.)
Company Name: TECHEXPO
Apply for this Position
 

Aerospace Systems Engineer
Candidate will be responsible for end-to-end systems engineering life cycle activities. These activities may include developing Concept of Operations; developing and analyzing enterprise and system level requirements; conducting impact assessment of new capabilities and proposed changes to an existing software/hardware baseline; conducting assessments of cost, schedule, and risk; conducting technology assessments; performing trade off analyses; enterprise and/or system architecture design and development; developing and monitoring RFCs; and conducting and supporting test activities. This position requires extensive client interaction and the ability to work in a multi-contractor team environment.
Required Skills: Multi-disciplinary skills to lead and support system requirements development, design trade-offs, application installation, system configuration, system testing, and system integration are required. Experience working with Intelligence Community or DoD information systems in a customer environment and five or more years systems engineering and technical task leadership experience is needed. Minimum of a Top Secret clearance is required.
Desired Skills: An advanced degree in Systems Engineering, Computer Science, Information Technology, Math, or Management is viewed positively, as are demonstrated experience in staff management and experience within the aerospace industry. Experience with network/system/application security architectures and implementation is desired.
Company Name: Solers
Apply for this Position
 

Director of Air Force Transport Aircraft Programs
The Director of Air Force Transport Aircraft Programs will report to the President & CEO of EADS CASA NA. This position will be responsible for the following:
• Utilize previous military tactical aircraft flying exp to convey the capabilities of the EADS CASA Aircraft to the Air Force & Specioal Operations Forces
• Build relationships with the Air Force, SOF & defense trade media & public affairs officers
• Represent EADS CASA at trade forums, shows, & demo tours
• Develop strategy to market EADS CASA Aircraft to the Air Force & Special Operations
• New business strategy development, & identification of new business opportunities
• Build communications strategies & plans
• Manage the planning & performance of communications &/or public relations
• Hands on involvement with presentations, promotions, advertising, marketing, sales & public relations
• Proposal development
• Budget management
• Compliant with project deadlines
The ideal candidate will meet the following requirements:
• Recently retired, highly skilled Air Force Aviator, prefer experience in transport/cargo, fixed wing & Special Operation Forces
• Has technical experience in Turbo Prop Aircraft
• Defense acquisition experience highly desired
• Good relationships with the Air Force & SOF, & key customer management skills
• Executive-level professional to manage high-level marketing strategy
• Good mgmt & motivational skills
Outstanding conceptual, interpersonal, planning and verbal/written communication skills
Please note:
• Will be trained in Spain for a 1-2 month period
Company Name: EADS north America Defense
Apply for this Position
 

Aircraft Manufacturing Engineer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Manufacturing Engineer investigates solutions to engineering and production problems of limited scope and impact. He/she documents manufacturing processes. She/he participates on engineering and manufacturing teams to improve product quality. He/she ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. He/she uses process engineering principles and techniques. She/he develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations. He/she performs trade and cost studies and assists in leading integrated product and process teams.
Company Name: Dusek Network Inc.
Apply for this Position
 

 Aircraft Manufacturing Engineering Manager
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Manufacturing Engineering Manager leads the team of engineers to investigate solutions to engineering and production problems of limited scope and impact. He/she leads and establishes the processes to document manufacturing processes. She/he participates on engineering and manufacturing teams to improve product quality. He/she ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. He/she provides quidance for process engineering principles and techniques. She/he develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations. He/she manages trade and cost studies and assists in leading integrated product and process teams.
Company Name: Dusek Network Inc.
Apply for this Position
 

Aircraft Mechanical Systems Engineer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Mechanical Systems Engineer provides systems engineering support on systems, major system elements, and/or interfacing systems. The engineer contributes to system architecture and design, assists in systems definition, trade-off and design activity. She/he reviews, evaluates, and analyzes design interfaces. The engineer prepares, reviews, and evaluates interface documentation, specifications, test plans and procedures. He/she assists in definition, analysis and allocation of requirements. He/she supports system test programs and analyses systems testing. The mechanical systems engineer conducts analysis of system requirements and components and supports system audits conducted to ensure intended system functionality and performance is achieved.
Company Name: Dusek Network Inc.
Apply for this Position
 

 Aircraft VP of Manufacturing
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
Our Client has an immediate opening for a Vice President of Manufacturing. We are searching for a dynamic leader who has experience transitioning from a small business Jet R&D program to a full scale production program. Start up experience within the aerospace industry is necessary, as well as understanding and experience in the concepts of the manufacturing process in any phase of the production cycle program.
The Vice President of Manufacturing will participate as a member of the Executive team developing the strategies and operations of the business and will report directly to the Chief Executive Officer. The qualified individual will possess a B.A. in Engineering with 10 years plus of progressive management responsibilities.
Company Name: Dusek Network Inc.
Apply for this Position
 

Aircraft Vice President of Sales and Marketing
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Vice President of Sales and Marketing will participate as a member of the Executive team developing the strategies and operations of the business and will report directly to the Chief Executive Officer. The qualified individual will possess a B.A. Degree in sales, marketing, business or related degree plus 10 years of successful light business aircraft sales experience and 15 years of aviation experience. Pilot’s license strongly preferred. Intimate knowledge of the light business jet market a must.
Company Name: Dusek Network Inc.
Apply for this Position
 

Aircraft Vice President of Engineering
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
Our Client has an immediate opening for a Vice President of Engineering. We are searching for a dynamic leader who has experience transitioning from a small business Jet R&D program to a full scale production program. Start up experience within the aerospace industry is necessary, as well as understanding and experience in the concepts of the manufacturing process in any phase of the production cycle program.
Company Name: Dusek Network Inc.
Apply for this Position
 

 Avionics Simulation Developer
We have career opportunities for experienced software developers to support our aircraft simulation programs. Tasking includes development, integration, and testing of avionics simulation systems.
A BS in Electrical Engineering, Computer Engineering or Computer Science or equivalent experience is required. Experience developing applications for MS Windows or Linux in C and C{PLS}{PLS} is also required. Knowledge of aircraft mission and avionics systems is desired. Three to five years experience with flight simulator or avionics systems is preferred. Strong written and verbal communication skills are also desired. U.S. Citizenship and ability to obtain a Secret clearance is required.
Company Name: J.F. Taylor, Inc.
Apply for this Position
 

Planning Specialist - Jet Engine Overhaul
Relevant Work Experience: 2{PLS} to 5 Years Career Level: Experienced (Non-Manager)
Education Level: Bachelors Degree
Job Description
Our Client has an immediate opening for a Planning Specialist. This position will formulate Customer Work Authorization and Work Accomplishment Instructions on engine, modules and parts, utilizing Engineering and Customer input. Manage all life-limited parts removed and installed during shop visit, ensuring Customer build requirements are met. Duties to include issuing LLP removal and final installation disk sheets. Will schedule and conduct pre-induction work-scope meetings with Production, Engineering, Inspection and Material departments. Will review engine records to determine Air worthiness Directive and Alert Service Bulletin requirements, and review applicable Customer Work Specification and ensure shop visit compliance.
AA degree or equivalent, plus 3-5 years specific/related experience with jet turbine engine overhaul, preferably JT8D. Ability to accurately interpret manuals, technical data and/or work in-process documents, maintain production standards/quality. Good verbal and written communication skills, especially word processing. Good verbal and written communication skills. Must be willing and able to work overtime.
Client offers complete Medical and Dental plans, 401(k) & Match, Life Ins, LTD, Holidays, Vacation, Sick Days and more
Company Name: Dusek Network Inc.
Apply for this Position
 

Jet Engine Engineer
Relevant Work Experience: 5{PLS} to 7 Years Career Level: Experienced (Non-Manager)
Education Level: Bachelors Degree
Job Description
Our Client is an FAA repair facility specializing in JT8D engine repair and is seeking results oriented engineering professional with more than 7 years demonstrated experience in performing JT8D engineering for internal and external customers.
Provide technical JT8D engineering knowledge to customer and company to ensure induction and completion of engine repairs is performed in compliance with FAA and customer requirements. Provide technical knowledge of JT8D engine for all aspects of the JT8D engine assembly, repair and testing. Coordinate technical, engineering and planning information among staff, customers and vendors.
Plan, prepare and issue engine work instructions and material build requirements according to customer specifications and FAA guidelines to shop personnel and customer. Schedule and conduct pre-induction workscope meetings with Customer, Production, Inspection and Material departments.
Monitor all phases of the engine repair from induction to shipment to ensure all customer requirements are met. Oversee the development of customer workscopes and specifications. Maintain and update engineering and customer records of required engine induction documents, files and listings.
Must be self-starter with excellent analytical, organization, communication and creative skills.
Proven ability to identify and promote continuous improvement processes to meet and exceed customer requirements. Demonstrated ability to develop and maintain long-term business relationships with customers by ensuring accurate engineering, planning and completion dates.
Bachelors degree in Mechanical, Aerospace or Aviation Technology. A&P license.
Company Name: Dusek Network Inc.
Apply for this Position
 

Aviation Systems Research Engineer
The UARC has multiple openings for Research Engineers/Scientists at various levels,
ranging from entry to senior level, to join an internationally recognized team conducting cutting-edge
research on automating portions of the nation’s air transportation system under NASA’s Airspace
Systems Program. The positions require engineering background in some or all of the following
areas: systems engineering, systems analysis, design, development, simulation and operational
test and evaluation of man/machine automation and decision-support systems. The Scientist/
Engineers will work closely with NASA researchers, outside researchers, air traffic controllers, air
traffic managers, and contractors to conceptualize technologies for the air traffic control system
targeted at the year 2025. At the senior level, the position will also encompass tracking and
scheduling of work performed, requiring leadership in recommending research areas, identifying
projects and schedule risks, addressing resource questions, gathering requirements, and reporting
on project progress. The position is based at NASA Ames Research Center in Mountain View,
California.
Minimum Qualifications: Bachelor’s degree, Master’s or PhD in a related discipline;
engineering analytical skills; understanding of queuing systems and basic principles of operations
research; understanding of complex distributed systems in a multi-platform environment.
Preferred: software engineering and integration expertise; understanding of air transportation
system operations and dynamics, aircraft operations and dynamics, air traffic management, the air
traffic control domain, and decision-support tool development and testing. Special Condition of
Employment: In order to comply with security measures at the University Affiliated Research
Center, the selected candidate will be required to be fingerprinted, and wear a photo I.D. badge.
Company Name: Jobelephant.com Inc
Apply for this Position
 

 HAWK Missile SMP Systems Technician - Field Engineer II
Hawk Missile SMP Systems Technician - Field Engineer II
Job Description: Responsible for repair, test and checkout of the HAWK System.
Isolates Malfunctions in the major end items to assembly, subassembly and component level.
Performed disassembly, repair, test and assembly operations as required to return the assets to serviceable condition.
Functionally verify that the major items perform to specified standards.
Provide on-site technical assistance.
Participated in on-the-job training (OJT) programs as required, and assists the Saudi Military Section Officer in enforcing safety policies, procedures and standards.
Prepares and submits maintenance reports and technical field reports (TFRs).
Performs other related duties as required or directed by the Section Officer.
Basic Qualifications:
Must have a Minimum of four (4) years experience in troubleshooting, fault isolation, repair, test and checkout of the HAWK System.
Two (2) years of HAWK System experience at a direct support or higher echelon level.
HAWK Phase III Certified Training
Desired Qualifications:
5 plus years of experience with the above qualifications
PATRIOT Experience is a plus
HAWK Phase III Experience is a plus
Company Name: Raytheon
Apply for this Position
 

Patriot Systems Maintenance Technician - Field Engineer II
Job Description: Provides technical support and advises the Royal Saudi Air Defense Forces on Patriot Intermediate Maintenance matters. Isolates malfunctions in the Patriot System with Intermediate Support Element (ISE) equipment when isolation is not accomplished with Built-in-test equipment (BITE) and other machine aided equipment. Performs repair of the ICC, ECS, RS, CRG , BME, BMC , IFF , AMG , GMT , LRPT AND LS. Functionally verifies that Major End Items (MEI) of equipment perform to specified standards. Installs authorized third echelon equipment modifications. Performs test and System Integration and Check Out (SICO) of modified equipment as required. Provides on site technical assistance. Participates in on the job training programs, and assists the section officer in enforcing safety policies, procedures, and standards. Identifies faulty work practices and demonstrates proper maintenance and troubleshooting techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs). Performs other duties as required or directed by the section officer. Basic Qualifications: Must have successfully completed the Patriot System Intermediate Maintenance Mechanic Course for MOS 27X/94S/916A/918D conducted under the auspices of the U.S. Army Training and Doctrine Command (TRADOC) or an equivalent course of instruction conducted by the Patriot Missile System Contractor. Must have a minimum of four (4) years of field maintenance in troubleshooting, isolating and correcting malfunctions in the Patriot Missile System, specifically the ICC, ECS, RS, IFF , AMG , GMT , LRPT, LS, and CRG using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE). Must be proficient in System Integration and Checkout (SICO). Required Education: Bachelor of Science Degree in Engineering or Applied Science
Company Name: Raytheon
Apply for this Position
 

Patriot Systems Maintenance Technician - Field Engineer II
Job Description: Provides technical support and advises the Royal Saudi Air Defense Forces on Patriot Intermediate Maintenance matters. Isolates malfunctions in the Patriot System with Intermediate Support Element (ISE) equipment when isolation is not accomplished with Built-in-test equipment (BITE) and other machine aided equipment. Performs repair of the ICC, ECS, RS, CRG , BME, BMC , IFF , AMG , GMT , LRPT AND LS. Functionally verifies that Major End Items (MEI) of equipment perform to specified standards. Installs authorized third echelon equipment modifications. Performs test and System Integration and Check Out (SICO) of modified equipment as required. Provides on site technical assistance. Participates in on the job training programs, and assists the section officer in enforcing safety policies, procedures, and standards. Identifies faulty work practices and demonstrates proper maintenance and troubleshooting techniques. Prepares and submits maintenance reports and System Problem Reports (SPRs). Performs other duties as required or directed by the section officer. Basic Qualifications: Must have successfully completed the Patriot System Intermediate Maintenance Mechanic Course for MOS 27X/94S/916A/918D conducted under the auspices of the U.S. Army Training and Doctrine Command (TRADOC) or an equivalent course of instruction conducted by the Patriot Missile System Contractor. Must have a minimum of four (4) years of field maintenance in troubleshooting, isolating and correcting malfunctions in the Patriot Missile System, specifically the ICC, ECS, RS, IFF , AMG , GMT , LRPT, LS, and CRG using automatic and semi-automatic program maintenance diagnostics, unit self-tests and built-in test equipment (BITE). Must be proficient in System Integration and Checkout (SICO). Required Education: Bachelor of Science Degree in Engineering or Applied Science
Company Name: Raytheon
Apply for this Position
 

Structural Analyst
The International Space Station (ISS) Structural Integrity team is responsible for structural integrity subsystem integration and verification of the ISS structural/mechanical subsystem. The primary responsibility for this senior lead engineer position will be comprise of: structural strength/fracture and fatigue life analysis including resolution of structural integrity issues resulting from hardware anomalies; verifying that all ISS structural components are capable of withstanding launch and on-orbit loads and environments without compromising structural safety; and verify that all ISS structural components are structurally sound for the 15 year design life. This encompasses developing new processes, methods, or concepts; participating in resolving complex problems that require a high level of ingenuity and innovation; verifying accuracy of results through consultation with other authorities in the field rather than by formal review; preparing plans for and overseeing development of processes, methods, and tools and maintaining them using CMMI and/or PBM to ensure continuous process improvement; translating contract requirements into work requirements, processes, and tasks; resolving or overseeing resolution of programmatic problems; resolving technical problems that would critically affect performance, cost, or schedule; reviewing work in progress to ensure that specifications, design, criteria, and performance schedules are maintained; organizing technical aspects of proposal development from bid decision to submittal of proposal to customer.
Company Name: The Boeing Company
Apply for this Position
 

System Engineer / System Analyst - DEEZ
Job Description:
This position is with the Missile Defense National Team. Provides technical leadership and supervision on the System Analysis team. Conducts technical analyses of existing and potential Ballistic Missile Defense System (BMDS) elements and architectures in support of the definition and development of overall system requirements and required component functionalities. Uses and supports the development and refinement of a broad range of computer based models and simulations. Leads trade studies of competing technologies and/or employment concepts to support senior decision makers in the planning and allocation of future resources.
Company Name: The Boeing Company
Apply for this Position

Sales Development Manager
The ideal candidate for this position will have recent experience selling the engineering services described above to Aircraft Manufacturers and their Suppliers. General technical knowledge of these disciplines is needed, however the engineering staff will be working closely in the sales efforts. An engineering degree would be helpful, but is not required.
The successful candidate will have a proven record of researching, contacting and developing clients for engineering, design and testing services.
We look forward to hearing from you regarding this outstanding opportunity.
Company Name: Dusek Network Inc.
Apply for this Position
 

 Systems Engineer II-Systems Verification&Test
Systems Engineer II – Common Aviation Command and Control System (CAC2S) Test Engineer
This position is for a Systems Engineer in the System Verification and Test Analysis Directorate to develop test procedures, conduct formal testing, operate command and control systems on the CAC2S program. The candidate will be a member of the CAC2S System Test Team.
Duties will include:
- Interpretation of functional requirements from system level requirements
- Develop detailed test procedures to validate system level requirements
- Conduct formal testing of CAC2S System
- Identify and document system/software deficiencies using Clearcase tool
- Create test reports, data reduction, data trending, test history logs, etc
Company Name: Bernard Hodes Group
Apply for this Position
 

Aircraft Tool Maker / Designer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Tool Maker plans, devises, and fabricates various tools, dies, gauges, jigs, and fixtures to within precise specifications. She/he may also modify or repair existing tools and dies. He/she performs complex tool making procedures requiring fitting, and assembling parts, and making adjustments to meet requirements. She/he operates from detailed diagrams. The typical incumbent has vocational training, apprenticeship or 8 -10 years relevant experience.
Company Name: Dusek Network Inc.
Apply for this Position
 

Avionics Sales Manager
Build customer relationships with the assigned customer for sales. Support the assigned customer in sales activities and provide assistance to the customer in identifying new opportunities. Coordinate activities and provide leadership to establish individual sales strategies obtaining appropriate approvals for pricing, and delivery. Negotiate contracts as required. Maintain knowledge of market trends, competitive actions, product needs, and customer base. Work with Marketing to develop project specific sales strategies for assigned customers. Make recommendations for continued growth. Responsible for generating prospects, formulating work scope specifications, and finalizing the sale of business aircraft avionics systems and related parts. This position must provide detailed account sales plans, forecasting of avionics sales, marketing of facility services and capabilities to the target market, utilizing direct mail marketing campaigns, making goal oriented sales calls, developing and maintaining rapport with customers, and effectively closing sales. This position is responsible for domestic and international accounts and must generate significant growth in future fiscal years.
Company Name: GE Aircraft Engines
Apply for this Position
 

Airframe Design Engineer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Airframe Design Engineer supports the airframe and systems installation design group and needs to possess strong designer skills and have a strong background in airframe design. She/he receives input for basic design concepts from the program design team and develops design concepts. She/he assesses various design criteria and performs trade study analysis. The engineer performs duties essential to the preparation of design layouts of new mechanical designs (models, drawings, drawing revisions and parts lists). He/she ensures that design specifications and requirements are met. The candidate must be competent in aspects of aircraft engineering drawings depicting details, assemblies, and installations. Duties will include model design, view depiction, generation of proper nomenclature, and dimensioning. Candidate must be able to use Unigraphics NX2.
Company Name: GE Aircraft Engines
Apply for this Position
 

 Aircraft Development Liaison Engineer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Liaison Engineer serves as focal point for all engineering issues relating to assembly, checkout and delivery; designs, develops and analyzes repairs and remedies for manufacturing, fabrication, installation or rigging discrepancies; investigates and resolves assembly problems resulting form design and tolerance errors. She/he coordinates and effectively develops solutions to technical problems encountered during the modification process. He/she works within the guidelines of program engineering and technical manuals to develop solutions to the nonconforming conditions encountered. She/he develops standard repairs for repetitive problems; presents the repairs to manufacturing and customer for signature approval. He/she develops correction actions as required for repetitive issues. The engineer works within an engineering department to resolves any issue that may prevent the successful completion of the MOD.
Company Name: Dusek Network Inc.
Apply for this Position
 

Aircraft Damage Tolerance Engineer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Damage Tolerance Engineer provides fatigue and damage tolerance technical support for the airplane development and certification program. He/she coordinates and assists in the development/documentation of fatigue / damage tolerance methods, analysis and tests. He/she provides review and approval of engineering data including drawings, discrepancy records, reports and process specifications. Knowledge of detail hand static analysis, finite element techniques, fracture analysis and structural inspection methods is required. The ideal candidate will have a minimum of a B.S. degree in Aerospace, Mechanical or Civil Engineering and a minimum of 5 years of relevant experience.
Company Name: Dusek Network Inc.
Apply for this Position
 

Aircraft Mechanical Systems Designer
The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation.
The Design/Drafter must be able to read, interpret, and revise engineering drawings on Unigraphics CAD workstations. The candidate must have experience in business jet and/or commercial jet aircraft structural design. The design responsibilities include, but are not limited to, aircraft structures to include aircraft primary and secondary structure design such as: Engine nacelle, Landing Gear, Fuselage, and Flight Controls. The candidate must be able to work in a teamwork environment with other disciplines (Systems, Fuels, Flight Controls, Avionics/Electrical, etc.), and technical analysis engineers (Stress, Damage Tolerance, etc.). The design/drafter must be able to advise group leader as to accurate drawing schedule completion and additional design resource requirements. Finally, the candidate must be self-starter and able to utilize limited resources.
Company Name: Dusek Network Inc.
Apply for this Position
 

 Bell 206L A&P Mechanic
We are seeking people to maintain B-206L helicopters for both hanger and field maintenance. Minimum 3 years recent experience. Prefer experience on on BK-117, B-212 and/or AS-350 as well. A&P License required.
Company Name: EW Career
Apply for this Position
 

 Bell 212 A&P Mech
Position will be based In Anchorage, AK and will also work in the field as needed.
Qualification minimums: FAA A&P License and 3 years experience maintaining Bell 212 aircraft or 5 years aircraft maintenance experience and Bell factory school. Preference given to those that have significant Bell Experience. Should be carded or OAS cardable.
 Company Name: EW Career
Apply for this Position
 

Aircraft Structural/Stress Engineer
CATIA V4, experience with static and fatigue methods for Boeing fuselage structure required; NASTRAN and Boeing damage tolerance experience preferred.
Job description:
Candidate must have experience in strength, stability, and durability analysis of the aircraft structure. The candidate should also have a working knowledge of, design allowable development, finite element modeling, and design criteria development. The candidate will be responsible for developing strength check notes, preparing formal analysis reports, and reviewing drawings.The candidate must have a minimum of ten years experience with stress analysis as used in aircraft design, good communication skills, the ability to effectively work in a team environment and have good PC and work-station computing skills. Hands on airplane experience dealing with Modification/Operation Maintenance, familiarity with Airbus and Boeing aircraft, and FAA certification are a plus. Education Requirements:
Candidate, as a minimum must have a BS degree in Civil, Structures, Mechanical or Aerospace Engineering, an MS is preferred.
 Company Name: EW Career
Apply for this Position
 

 AEROSPACE TECH DESIGNER - STRUCTURAL DESIGN
JOB DUTIES: Develop 3D electronic datasets using CATIA and create mechanical/structural detail, assembly, and installation drawings by applying company, industry, and governmental standards using CATIA drafting methods. Investigate design precedents to document and release engineering designs for use by downstream organizations. Create, develop, and maintain mechanical/structural engineering product designs by preparing design layouts, modifying existing designs, and resolving design discrepancies to satisfy customer and production requirements.
 Company Name: EW Career
Apply for this Position
 

 Systems Engineer - Air Vehicle Management/Flight Controls
Systems Engineer - Air Vehicle Management/Flight Controls
This engineer is responsible for development fault tolerant systems; documentation of system requirements; software/hardware integration, testing and installation support; presentation of concepts to customers; leading engineering team; preparing specifications; developing test methodologies and monitoring technology trends.
Experience:
* A minimum of 5 years avionics sub-systems engineering experience
* Working knowledge of vehicle management systems or flight controls design, development and testing,
* Proven leadership skills
* BS degree in engineering
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
 Company Name: Smiths Aerospace
Apply for this Position
 

 Systems Engineer - Aircraft Data Networks
The selected candidate will develop system requirements and design computing platform architectures with special knowledge in secure data communication networks. Duties will include: documenting requirements; allocating and managing requirements; defining test plans and procedures; integrating hardware and software.
Experience:
* BSEE or equivalent
* Experience with data network design, development and testing
* Knowledge of avionics and avionics interfaces
* 5 years avionics sub-systems engineering experience with an aircraft or avionics company
* Proven leadership skills
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
Company Name: Smiths Aerospace
Apply for this Position
 

 Software Lead - Navigation DB
Generating software development plans; initiating software development process improvements; performing software cost estimation and forecasting tasks; and providing software technical leadership are the main responsibilities of this position.
Experience:
* 6{PLS} years in software development with some leadership experience .
* Good working knowledge of ARINC 424, navigation database software requirements design and management, and navigation database processing software.
* BS Computer Science or equivalent; MS preferred.
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
 Company Name: Smiths Aerospace
Apply for this Position
 

 FMS Systems Engineer
FMS Systems Engineers
Our Flight Management Systems organization facility seeks Systems Engineers for requirements development, architecture, specification, and test case development, as well as systems integration. This position will interact with internal and external customers. Duties will include integrating communication radio controls into software partitions hosted on the Flight Management Computer (FMC); developing mulit-function Control Display Unit (MCDU) pages to provide control of radios - including page flows; developing a user interface to manage a broad spectrum of communication radios; and keeping abreast of ongoing radio development to integrate new functionality into current designs.
Experience:
* BSEE or MSEE preferred.
* BS/MS in Computer Science, Computer Engineering, Avionics Systems, Mathematics, or Physics would be considered.
* Background of generating and managing systems requirements as well as involvement with design aspects of FMSs
* Operational experience using Military Communication Radios.
* Must understand the functionality and operation of all radio bands and types - HF/VHF/UHF/Satellite/Data Link.
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
 Company Name: Smiths Aerospace
Apply for this Position
 

Avionics Systems Engineer - Computing Platforms
Positions are available at all levels for systems engineers who are knowledgeable in computing platform architectures, electronics and military packaging. These engineers will be responsible for designing the system architecture containing hardware and software elements in a VME form factor chassis, defining requirements for hardware and embedded software, preparing test cases, conducting hardware and software integration, performing system testing and documenting the results. Engineers in senior-level positions will coordinate the activities of hardware designers and must have strong team building and communication skills.
Experience:
* Knowledge of computer architectures, aircraft electronics for analog and digital processing, video and graphics processing, high speed digital communication, interface definition and backplane design are beneficial.
* Unique characteristics include fiber channel interfaces, multiple PowerPC based processors, fault tolerant/redundant design methodology and a partitioned application software environment.
* Familiarity with the DOORS requirements management tool.
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
 Company Name: Smiths Aerospace
Apply for this Position
 

 Avionics Systems Analysis Engineer
Avionics Systems Analysis Engineers
This Mid-to-Senior Level Systems Engineer will be responsible for the development of systems test strategies, system test methods and regulatory certification of avionics systems. Duties will include: documenting requirements; allocating and managing requirements; defining test plans and procedures; participating in improvement of company processes; mentoring and training engineers in technology and processes.
Experience:
* A minimum of 3 years experience with avionics software and hardware integration, testing and test methodologies.
* BS in engineering.
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
 Company Name: Smiths Aerospace
Apply for this Position
 

Avionics Safety Engineer
Avionics Safety Engineer
In this key position, the selected candidate will perform safety assessments, failure mode and effect analysis, and assist with product certification and human factors engineering.
Experience:
* 5{PLS} years safety experience in an aerospace corporation desired.
* BSEE or BS in Avionics/Aerospace Engineering.
* For security reasons, most positions require applicants meet certain eligibility requirements, including US citizenship or permanent resident alien status.
 Company Name: Smiths Aerospace
Apply for this Position
 

Aviation Systems Engineer
The Aviation Systems Engineer will assist the Broad Area Maritime Surveillance Platform Team in the concept development phase of acquisition.
REQUIREMENTS:
-Systems Engineering experience (aviation related preferred).
-Experience with the DoD aquisition process.
-NAVAIR experience is a plus.
-Engineering degree.
-Familiarity with propulsion systems.
-Must meet eligibility requirements for access to classified information.
-U.S. Citizenship
-Candidates selected will be subject to a government security investigation and must meet eligibility requirements for access to classified information.
 Company Name: DELEX SYSTEMS INC
Apply for this Position
 

aero aircraft, aerospace engineer, aircraft aerospace, aircraft aviation, aircraft avionics, aircraft cockpit, aircraft maintenance, aircraft manufacturing companies, aircraft manufacturing industry, aircraft plane, aircraft planes, aircraft wing, airplane aircraft, airplanes aircraft, automotive engineer, boeing aircraft, cessna aircraft, civil engineer, construction engineer, design engineer, electrical engineer, electronic engineer, electronics engineer, engineer companies, engineer courses, engineer degree, engineer department, engineer projects, engineer technician, engineer technology, engineer work, environmental engineer, field engineer, flight aircraft, flying aircraft, fuel aircraft, graduate engineer, helicopter aircraft, industrial engineer, industrial manufacturing, industry engineer, jet aircraft, job engineer, jobs engineer, manufacturing companies, manufacturing industries, manufacturing industry, mechanical engineer, military aircraft, military engineer, phd engineer, process engineer, process manufacturing, production manufacturing, project engineer, research engineer, resume engineer, salary engineer, science engineer, structural engineer, student engineer, technical engineer, Avionics Systems Engineer, air force engineer, air force avionics, northrop grumman systems, electronic warfare systems, air force systems, aerospace engineer, aerospace avionics, aircraft avionics, honeywell avionics, uav systems, avionics technology, military engineer, avionics gps, thales avionics, military avionics, boeing avionics, surveillance systems, flight avionics, systems sensor, navy avionics, helicopter systems, aviation avionics, helicopter avionics, aerospace systems, raytheon systems, radar systems, aircraft systems, electronic engineer, technical engineer, manufacturing engineer, electronics engineer, future systems, airborne systems, engineer technology, navy systems, aero avionics, contract systems, army systems, satellite systems, industry engineer, flight systems, army engineer, military systems, boeing systems, unmanned systems, industry systems, operational systems, systems sensors, vehicle systems, systems integrated, tactical systems, advanced systems, avionics maintenance, dod systems, laser systems, naval systems, space systems, ground systems, electronic systems, mission systems, defense systems, missile systems, operations systems, engineer companies, cost systems, communication systems, systems communications, equipment systems, technology systems, systems development, defence systems, combat systems, systems companies, aero aircraft, airbus aircraft, aircraft aerospace, aircraft aviation, aircraft avionics, aircraft cockpit, aircraft commercial, aircraft engines, aircraft faa, aircraft helicopters, aircraft jets, aircraft maintenance, aircraft pilot, aircraft pilots, aircraft plane, aircraft planes, aircraft safety, aircraft transport, aircraft wings, airplane aircraft, airplanes aircraft, boeing aircraft, cargo aircraft, cessna aircraft, civil engineer, experimental aircraft, flight aircraft, fly aircraft, flying aircraft, fuel aircraft, helicopter aircraft, jet aircraft, landing aircraft, lockheed aircraft, military aircraft, military engineer, navy aircraft, passenger aircraft, piper aircraft, propeller aircraft, twin aircraft, ultralight aircraft, Missile Technician, air force missile, missile technology, rocket technology, missile technology control regime, iran missile technology, clinton missile technology, missile technology control, aerospace technician, radar technician, aircraft technician, missile command, laser technician, avionics technician, military technician, weapons technician, range technician, satellite technician, marine technician, aviation technician, army technician, surveillance technician, flight technician, missile aircraft, communications technician, gps technician, missile engineering, engineering technician, intelligence technician, electronic technician, electronics technician, communication technician, missile propulsion, missile space, missile radar, missile defense, raytheon missile, missile maintenance, military missile, development technician, missile payload, submarine missile, ground missile, missile detection, missile ship, missile systems, missile weapons, missile simulation, operations technician, system technician, navy missile, missile defence, missile flight, systems technician, missile capabilities, maintenance technician, army missile, missile testing, missile launch, missile specifications, technology technician, missile cost, laser missile, missile tracking, missile development, testing technician, missile system, vehicle technician, anti missile, missile range, equipment technician, jet engine design, jet engine turbocharger, jet engine history, jet engine compressor, jet performance, jet aviation, jet aircraft, jet engine technology, cessna jet, jet engine efficiency, jet engine plans, aerospace engineer, jet turbine, jet engine thrust, speed engine, aero jet, jet engine combustion, jet airplanes, jet engine fan, jet engine overhaul, jet planes, jet engine cost, air engine, jet air, jet pilot, jet helicopter, military engineer, jet speed, jet airplane, jet fuel, airplane engine, jet cockpit, jet engine inlet, design engineer, jet maintenance, boeing jet, engineer technology, plane engine, aircraft engine, gas engine, aviation engine, jet wing, engine performance, flying jet, flight jet, model jet, turbo engine, engine weight, jet military, generator engine, engine power, engine diagram, exhaust engine, jet plane, engine maintenance, jet landing, jet specifications, engine repair, engine oil, marine engine, engine specifications, fuel engine



 

Material Scheduler, Commodities Requirements Analyst, Material Planning and Acquisition Analyst, Production Control Scheduler, Calibration Laboratory Technician, Engineering Laboratory Technician, Quality Assurance Calibrator, Standards Laboratory Technician, Test Equipment Certification Technician, Aerodynamicist, Aerodynamics Engineer, Aerophysics Engineer, Aeronautical Engineer, Aeronautical Test Engineer, Aeronautical-Design Engineer, Aeronautical-Research Engineer, Development Engineer, Stress Analyst, Value Engineer, Cost Development Engineer, Design Specialist, Producibility, Cost and Component Technology, Field-Service Engineer, Aeronautical Project Engineer, Aerospace Project Engineer, Drafter, Aeronautical, Research Mechanic, Laboratory Test Mechanic, Flight-Test Data Acquisition Technician, Data Acquisition Laboratory Technician, Technical Aide, Flight Test Data, Tool Design Checker, Tool Drawing Checker, Nesting Operator Numerical Control, Computer-Numerical-Control Nesting Operator, Pattern Data Operator, Liaison Engineer, Procurement Engineer, Tooling Coordinator Production Engineering, Tool Procurement Coordinator, Radio Station Operator, Radio Operator, Ground, Controller, Remotely-Piloted Vehicle, Test Pilot, Engineering Test Pilot, Engineering-Document-Control Clerk, Blueprint Control Clerk, Drawing-Release Clerk, Engineering-Release Clerk, Release and Technical Records Clerk, Inspector, Receiving, Aircraft-Shipping Checker, Aircraft-Delivery Checker, Molder, Punch, Molder, Molder, Closed Molds, Autoclave Operator, Bonding Equipment Operator, Metal-Bonding Press Operator, Platen Operator, Metal Bond, Encapsulator, Curing Oven Attendant, Numerical-Control Router Operator, Robotic Machine Operator, Industrial Robot Operator, Saw Operator, Drophammer Operator, Blacksmith, Hammer Operator, Shot-Peening Operator, Hammer Operator, Planishing-Hammer Operator, Power-Hammer Operator, High-Energy-Forming Equipment Operator, Field-Service Representative, Technical Specialist, Aircraft Systems, Engine Tester, Experimental Aircraft Mechanic, Experimental Aircraft and Engine Mechanic, Field and Hangar, Experimental Flight Test Mechanic, Experimental Preflight Mechanic, Airframe-and-Power-Plant Mechanic, Rocket-Engine-Component Mechanic, Airframe-And-Power-Plant-Mechanic Helper, Airplane-Mechanic Helper, Developer Prover, Interior Assemblies, Developer Prover, Upholstering, Trimmer, Development Mechanic, Controls Development Mechanic, Developer-Prover, Mechanical, Fabrication And Structures Development Mechanic, Hydraulic And Plumbing Development Mechanic, Mechanic, Experimental Structural Assembly, Model Maker, Model Builder, Wind Tunnel, Model Builder, Display, Rocket-Motor Mechanic, Mock-Up Builder, Electrical and Radio Mock-Up Mechanic, Automated Cutting Machine Operator, Fluid Jet Cutter Operator, Chemical-Etching Processor, Chemical-Milling Processor, Etcher, Aircraft, Precision Assembler, Bench, Detail Bench Assembler, Test Equipment Mechanic, Engineering Test Mechanic, Structural Test Mechanic, Instrument Inspector, Inspector, Radar And Electronics, Electrician, Research, Electrical-Equipment Tester, Inspector, Precision Electrical Assembly, Tester, Electrical Accessories, Electrical Assembler, Assembler, Radio and Electrical, Assembler, Wire Group, Bench Assembler, Electrical, Plastics Fabricator, Plastics Bench Mechanic, Plastics Fabricator and Assembler, Experimental Plastics Fabricator, Filament-Wound Parts Fabricator, Plastic Parts Fabricator, Plastic-Sign Fabricator, Plastics Rework And Repair Mechanic, Plastics Worker, Composite Worker, Bagger, Composite Assembler, Composite Bond Worker, Composite Laminator, Composite Layup Worker, Composite Trim And Drill Worker, Kitter, Plastic Parts Fabricator-Trimmer, Smooth And Burr Worker, Composites, Patternmaker, Plaster, Loft Patternmaker, Model Maker, Plaster and Plastic, Patternmaker, Plaster and Plastic, Upholsterer - Aircraft, Aircraft Upholsterer, Supervisor, Inspection, Supervisor, Production Department, Tester, Rocket Motor, Tester, Rocket Engine, Inspector, Assemblies and Installations, Inspector, Assembly, Inspector, Subassembly, Inspector, Final Assembly, Inspector, Final Assembly, Electrical, Inspector, Final Assembly, Mechanical, Inspector, Structures, Inspector, Engines And Components Assembly, Inspector, Experimental Assembly, Inspector, Electrical And Electronic Installations, Inspector, Material Disposition, Inspector, Missile, Inspector, Missile Final Assembly, Missile Inspector, Preflight, Space Vehicle Inspector, Preflight, Inspector, Outside Production, Inspector, Plastics and Composites, Inspector, Advanced Composite, Inspector, Plastics Fabrication-Developmental, Inspector, Production Plastic Parts, Inspector, Structural Bonding, Operational Test Mechanic, Checkout Mechanic, Hydraulic And Rigging, Electrical Checkout Mechanic, Mechanic, Electrical Operational Test, Mechanic, General Operational Test, Inspector Precision Assembly, Assembler-Installer General, Line Assembler, Aircraft, Inspector, Fabrication, Inspector, Machined Parts, Inspector, Sheet Metal Parts, Inspector, Welded Parts, Aircraft Mechanic, Armament, Armament Assembler, Armament Installer, Riveting Machine Operator, Automatic, Riveting Machine Operator, Programmed Control, Riveting Machine Operator, Tape Control, , Aircraft Mechanic, Rigging and Controls, Aircraft Mechanic, Rigger, Assembler-Installer, Cable Controlled Systems, Assembler, Aircraft Power Plant, Engine Buildup Mechanic, Assembler, Aircraft, Structures and Surfaces, Aircraft Mechanic, Structures, Assembler-Installer, Sturctures, Structures Assembler, Assembler, Tubing, Tube Bender-Assembler, Cable Assembler and Swager, Cable Assembler, Cable Cutter and Swager , Aircraft Mechanic, Plumbing and Hydraulics, Assembler, Aircraft, Plumbing and Hydraulics, Hydraulic and Plumbing Installer, Inspector, Processing, Installer, Interior Assemblies, Cabin Furnishings Installer, Precision Assembler, Assembler, Metal Bonding, Assembler, Bonding, Assembler, Subassembly, Detail Assembler, Sheet Metal Assembler, Pressure Sealer-And-Tester, Sealer, Aircraft, Fuel Tank Sealer And Tester, Integral Tank Sealer, Pressurization Mechanic, Pressurizer, Pressurization Mechanic, Air Control, Skin-Lap Bonder, Bonded Structures Repairer, Bonder, Rework and Repair, Aircraft Skin Burnisher, Assembler Ground Support Equipment, Ground Equipment Mechanic, Helper, Manufacturing, General Helper, Avionics Technician, Avionics and Radar Technician, Avionics Mechanic, Radio and Radar Technician, Electrician, Aircraft, Aircraft and Engine Electrician, Field and Hangar, Aircraft Mechanic, Electrical, Experimental-Rocket-Sled Mechanic, Aircraft Mechanic, Electrical and Radio, Assembler, Electromechanical, Airplane Coverer, Dope-and-Fabric Worker, Doper, Wind Tunnel Mechanic, Load-Test Mechanic, Proof-Load Mechanic, Propulsion Satellite Engineer , Spacecraft Design Engineer , Solid Propulsion Engineer, Liquid Propulsion Engineer , Aircrew Survival Equipmentman (PR), Interior Communications Electrician (IC) - Power Distribution, Interior Communications Electrician (IC) - Amplified Voice and Call Systems, Interior Communications Electrician (IC) - Alarms and Warning Systems, Interior Communications Electrician (IC) - Indicating and Metering Systems, Aerodynamics Engineer

California,Texas,New York,Florida,Illinois,Pennsylvania,Ohio,Michigan,Georgia,New Jersey,North Carolina,Virginia,Massachusetts,Washington,Indiana,Tennessee,Arizona,Missouri,Maryland,Wisconsin,Minnesota,Colorado,Alabama,Louisiana,South Carolina,Kentucky,Puerto Rico,Oregon,Oklahoma,Connecticut,Iowa,Mississippi,Arkansas,Kansas,Utah,Nevada,New Mexico,West Virginia,Nebraska,Idaho,Maine,New Hampshire,Hawaii,Rhode Island,Montana,Delaware,South Dakota,Alaska,North Dakota,Vermont,District of Columbia,Wyoming, USA, The USA, United States, United States of America, US, Canada, North America

Aeronautical jobs defense

Aeronautical Jobs USA

Aeronautical careers

Aeronautical careers defense

Aeronautical careers USA

Aerospace jobs

Aerospace jobs defense

Aerospace jobs USA

Aerospace careers

Aerospace careers defense

Aerospace careers USA

Aviation careers

Aviation careers defense

Aviation careers USA

Aviation jobs

Aviation jobs defense

Aviation jobs USA

Avionics jobs

Avionics jobs defense

Avionics jobs USA

Avionics careers

Avionics careers USA

Avionics careers defense

Avionics Engineering jobs

Avionics Engineer jobs

Aerospace jobs

Aerospace engineering jobs

Aerospace defense jobs

Aerospace clearance jobs

Aerospace security clearance jobs

Aerospace careers

Aerospace careers USA

Aerospace defense careers

Aerospace engineer jobs

Aerospace engineer careers

Aerospace, High Strength Alloys, Mechanical Behaviour, Microstructure, Modelling, Plates, Precipitation, Processing, Strengthening
Aerospace, High Strength Alloys, Mechanical Behaviour, Microstructure, Modelling, Plates, Precipitation, Processing, Strengthening
Aerospace, Ceramic Tooling, Ceramics, Die Forming, Diffusion Bonding, Hot Forming, Manufacturing Technology, Rapid Prototyping, SPF, SPF/DB, Superplastic Forming
Aerospace, Diffusion Bonding, Finite Element Modeling, SPF/DB, Stop-Off
Aerospace, Fin-Box, Resin Transfer Moulding, RTM
Aerospace, Automotive, Surface Stresses, Thermoelastic Stress Analysis
Aerospace, Al-Cu-Mg-(Li), Al-Zn-Mg-Cu, Welding
AA7xxx, Aerospace, Aluminium, Hybrid, Laser, Welding
Aerospace, Al Alloy, Laser Beam Welding, Neutron Diffraction, Residual Stress, X-Ray Diffraction (XRD)
Aerospace, Aluminium Matrix Composite, Deformation, Framework
airbus
boeing
smith and wesson
honeywell
rolls royce
lockheed martin
sennheiser
eads
smith & wesson
raytheon
eurocopter
airbus a380
helicopters
embraer
sikorsky
gulfstream
Airships and Balloons
Components and Parts
Contract Manufacturing
Fixed Wing
Gliders
Hang Gliders
Maintenance and Repairs
Paragliders
Paramotor
Rotary Wing
Unmanned

about aerospace engineering
accelerated flight training
aero industry jobs
aeronautical companies
aeronautical engineer
aeronautical engineer career
aeronautical engineering
aeronautical engineering career
aeronautical engineering jobs
aeronautical engineers
aeronautical jobs
aerospace
aerospace aeronautical engineering
aerospace aeronautics
aerospace and aeronautical engineering
aerospace and defense
aerospace and engineering
aerospace career
aerospace careers
aerospace companies
aerospace company
aerospace components
aerospace composites
aerospace corp
aerospace corporation
aerospace defense
aerospace electronics
aerospace employment
aerospace engineer careers
aerospace engineer companies
aerospace engineer information
aerospace engineer interview
aerospace engineer jobs
aerospace engineer university
aerospace engineering
aerospace engineering & support
aerospace engineering and support
aerospace engineering books
aerospace engineering brakes
aerospace engineering california
aerospace engineering careers
aerospace engineering classes
aerospace engineering colleges
aerospace engineering companies
aerospace engineering company
aerospace engineering cycling
aerospace engineering education
aerospace engineering facts
aerospace engineering florida
aerospace engineering forum
aerospace engineering georgia
aerospace engineering group
aerospace engineering history
aerospace engineering inc
aerospace engineering india
aerospace engineering info
aerospace engineering information
aerospace engineering jobs
aerospace engineering magazine
aerospace engineering nasa
aerospace engineering new york
aerospace engineering news
aerospace engineering ohio
aerospace engineering online
aerospace engineering outlook
aerospace engineering pictures
aerospace engineering program
aerospace engineering services
aerospace engineering software
aerospace engineering spectrum
aerospace engineering technology
aerospace engineering texas
aerospace engineering training
aerospace engineering virginia
aerospace engineering washington
aerospace engineering wikipedia
aerospace engineers
aerospace group
aerospace inc
aerospace industries
aerospace industry
aerospace industry portal
aerospace job
aerospace maintenance
aerospace manufacturing
aerospace materials
aerospace medicine jobs
aerospace news
aerospace recruitment
aerospace systems
aerospace systems engineer
aerospace systems engineers
aerospace technologies
aerospace technology
aerospace vacancies
aerospace work
aircraft engineering and aerospace
aircraft engineering and aerospace technology
aircraft engineering jobs
aircraft job
aircraft jobs
aircraft maintenance job
aircraft maintenance jobs
aircraft mechanics jobs
aircraft technician job
aircraft technician jobs
airline job
airline jobs
airplane jobs
airport jobs
arizona aerospace engineering
aviation
aviation career
aviation careers
aviation colleges
aviation employment
aviation engineering
aviation engineering jobs
aviation job
aviation job search
aviation jobs search
aviation jobsearch
aviation maintenance jobs
aviation management jobs
aviation mechanic job
aviation mechanic jobs
aviation news
aviation opportunities
aviation recruitment
aviation safety jobs
aviation school
aviation schools
aviation sheetmetal jobs
aviation training
aviationjobs
avionics
avionics jobs
avionics technician jobs
boeing aerospace engineer
british aerospace engineering
business2business aerospace
cabin crew jobs
careers
careers in aerospace
careers in aerospace engineering
civil engineer gifts
colorado aerospace engineering
corporate aviation jobs
cu aerospace engineering
embry riddle aerospace engineering
engineer gift
engineer gifts
engineering
engineering career
engineering careers
engineers
flight jobs
flight school
flight schools
flight training
flying jobs
flying school
flying schools
flying training
gift for engineer
gkn aerospace engineering
gkn aerospace engineering services
helicopter flight schools
helicopter flight training
helicopter jobs
history of aerospace engineering
honeywell aerospace engineering
illinois aerospace engineering
information on aerospace engineering
interactive aerospace engineering
job
jobs
jobs engineering
kaman aerospace jobs
magellan aerospace
maryland aerospace engineering
michigan aerospace engineering
minnesota aerospace engineering
mit aerospace engineering
mobile aerospace engineering
mobile aerospace engineering inc
nasa aerospace engineer
overseas aviation jobs
panama aerospace engineering
precision aerospace
san diego aerospace engineering
sdsu aerospace engineering
singapore aerospace
st aerospace engineering
st mobile aerospace engineering
st mobile aerospace engineering inc
us technology aerospace engineering
 

www.defensetalent.com