Manufacturing & Production Jobs   11/04/2008  Associate Operations Sr. Responsible for performing various tasks within an assigned team, project or functional area. Manufacturing process skills required including complex mechanical assembly and soldering operations using on-line work instructions. Ability to exhibit adaptability/flexibility. Applicant must have good written and verbal communication skills, ability to accurately complete assembly process paperwork/buy-off operations. Applicant must have above average computer skills with the ability to multi-task. Requires a positive attitude with good teamwork skills. Applicant will also responsible for interpreting work change orders while completing rework and/or assembly updates. Applicant will be responsible for supporting safety standards in the production area as well as being willing to cross train others. Familiarity with numerous DMR project hardware assemblies is required as well as the ability to perform various automated test operations.High School diploma/GED and at least 6 years manufacturing experience required. Soldering experience (J-Std, IPC-610), ESD, ability to understand and interpret work orders, instructions and change orders. Applicant must be capable of obtaining a US Security Clearance. Requires ability to integrate sub-assemblies into final hardware. Applicant must be able to read and interpret basic schematics and drawings. Requires participation in problem solving activities. Applicant must be capable of obtaining a US Security Clearance. Applicant must be capable of obtaining a US Security Clearance...   Company Name:  General Dynamics C4 Systems Apply for this Position   10/24/2008  2138 Radial Assembler I Using detailed instructions, assembles and assists other employees in the production of high-quality reflector radials and other components built in the work center. Essential Functions: • Using panel department tools, assembles high-quality radial components. • Procures needed parts and materials, and moves them to work center. • Rolls form tees to correct contour. • Using inspection tools, evaluates quality of work completed. • Moves completed work to the next work center. • Assists in the training of lower level assemblers. • Assists with other work centers within Dept. 2138 • Performs work area cleanup and safety related duties. • Performs other related duties as assigned by management. • Complies with SATCOM and departmental policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School Graduate or equivalent preferred. • Computer skills preferred. • Reading comprehension skills to understand work orders and written instructions. • Math skills to perform basic calculations. • Oral communication skills to exchange information with co-workers and supervisor. • Interpersonal skills to cooperate and work effectively with others Must be familiar with the following tools and equipment: • Gluing tools • Radial inspection tools • Wrenches • Tape Measure • Riveters • Drills • Metal cutting tools • Dollies • Grinders • Pallet Jack • Sanders • Forklift   Company Name:  General Dynamics C4 Systems Apply for this Position   10/21/2008  Manufacturing Engineer Principal We provide and fully support total IT solutions. Customers can fulfill all of their computing and network needs with CTD’s full line of rugged and semi-rugged computers, network equipment, and peripherals. Using CTD’s technical services, customers can build and implement total solutions that meet their exact needs. CTD’s rugged and semi-rugged computer products include a full line of handheld, laptop, tablet, and palm-top computers; networking products include servers, storage devices, and wireless networking components; and edge devices include displays, workstations, printers, and faxes. CTD’s technical services offerings include systems integration; wireless network design and integration; and worldwide end-to-end life cycle support. Our customers include all branches of the U.S. Military; public-safety organizations; and commercial field services in the insurance; communication, utilities, transportation, and telecommunications industries worldwide. CTD has approximately 900 employees at facilities in the United States, Canada, Europe, and Asia. Strong technical contribution as individual designer. Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Able to work directly with multiple vendors for large quantity manufacturing. Able to evaluate capabilities of potential manufacturing facilities. Works on site with manufacturing sites as needed. Implements and analyzes manufacturing engineering plans and projects. Designs, develops and transfers manufacturing engineering tools, strategies and systems. Develops manufacturing engineering plans and strategies for specific products and processes. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Identifies domain of expertise. Plans sub tasks. Follows direction and makes a significant contribution to the team. Listens to and acts on mentor advice. Begins to understand other commitments and interdependencies. Moves from sub-task optimization to project optimization. Promotes process/policy compliance. Supports continuous improvement initiatives.BS Degree in a technical field related to manufacturing +9 years demonstrated results, or equivalent experience. Advanced Degree and experience in the area of Quality is a plus. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Secret level U.S. DoD security clearance is required   Company Name:  General Dynamics C4 Systems Apply for this Position   10/18/2008  2154 Production Clerk Job Summary: Scans program files and test reports, performs secretarial duties including filing, answering telephones, sending faxes, and making copies. • Scan program files and test reports. • Performs secretarial duties as assigned. • Assists other manufacturing departments with clerical work as needed. • Performs other related duties as assigned by management. • Complete data entry on a timely basis and error free. • Properly use Company facilities, equipment and supplies. • Comply with Company and departmental policies, procedures and regulations. • Use safe conduct. • Work during scheduled hours. • Practice neatness. • Maintain quality output while meeting department production requirements...   Company Name:  General Dynamics C4 Systems Apply for this Position   10/17/2008  RF Assembler Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus. Applicant must be capable of obtaining a US Security Clearance...   Company Name:  General Dynamics C4 Systems Apply for this Position   10/10/2008   Build and Rework Assembler We provide and fully support total IT solutions. Customers can fulfill all of their computing and network needs with CTD’s full line of rugged and semi-rugged computers, network equipment, and peripherals. Using CTD’s technical services, customers can build and implement total solutions that meet their exact needs. CTD’s rugged and semi-rugged computer products include a full line of handheld, laptop, tablet, and palm-top computers; networking products include servers, storage devices, and wireless networking components; and edge devices include displays, workstations, printers, and faxes. CTD’s technical services offerings include systems integration; wireless network design and integration; and worldwide end-to-end life cycle support. Our customers include all branches of the U.S. Military; public-safety organizations; and commercial field services in the insurance; communication, utilities, transportation, and telecommunications industries worldwide. CTD has approximately 900 employees at facilities in the United States, Canada, Europe, and Asia. Participates in concurrent design team Creates part lists from schematics Performs complex Standard Repairs Reviews inspection and test data for compliance to requirements Performs daily Preventative Maintenance Performs rework / incorporating Master Change Orders at customer sites Provide rework on project as assigned Generate purchase orders and track receipt of purchase material. Maintain and control the parts crib. Assist in definition of processes required on a day to day basis Resolves conflicts on assigned tasks with management Interface with other manufacturing operations and subcontractors Assist development teams to document key processes Assist quality root cause/corrective action teams Self motivated and directed Able to change in a rapid changing work environmentHigh School Diploma or Equivalent and eight years of applicable experience Ability to use various computer software applications to analyze and manage data Strong communication and interpersonal skills Ability to multi task Technical communications skills Working Knowledge of Microsoft Office Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   10/09/2008   2148 Industrial Painter I Under general supervision, prepares surfaces and applies appropriate coatings to details and assemblies using spray methods of painting with baked-on air dry paints. Verifies product meets or exceeds quality system standards through inspection and documentation. • Prepares surfaces and applies coatings to details and assemblies. • Conducts daily cleanup of equipment and work area to fulfill proper work area painting environment requirements. • Assists in the procurement of needed supplies and materials. • Performs safety-related duties and other duties as assigned by supervisor. • Reads and understands drawings, BOM’s, work orders, and SOFA’s. • Performs quality inspections using inspection equipment and quality standards. • Provides documentation of inspection process. • Assists in job assignments to lower level employees. • Performs safety related duties and other duties as assigned by supervisor. • Complies with all Company policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High school graduate or equivalent preferred. • Two to three years of experience industrial and metal finishing process required. • Knowledge and understanding of Company paint specifications for required finishes. • Knowledge of inspection equipment, such as electrical and mechanical paint thickness gauges, micrometers, • Knowledge of dry booth painting. • Knowledge of proper surface preparation prior to painting. • Knowledge of painting equipment used. • Interpersonal skills to cooperate and work effectively with others. • Ability to understand complex drawings, work orders and BOMs. • Ability to evaluate work conditions and quality of work produced. • Ability to work in tight spaces. Machines and Equipment Involved: • Air spray-painting rigs • Air make-up systems • Airless spray-painting rigs • Viscosity cup • Dry Booths • Paint mixing equipment • Blowers • Drills • Sanders/blasters • Riggers • Chemical test kits • Cranes • Forklift • Paint thickness gauges Company Name:  General Dynamics C4 Systems Apply for this Position   10/04/2008  2176 Material Handler/Receiving Clerk Responsible for issuance of raw materials (Aluminum and Steel) to production operations. Entails critical handling of large/heavy work pieces in order to allow operators and others to perform operations such as shearing, punching, drilling, bending, and deburring. Performs area cleanup and safety related duties. Ensure an effective inventory control over all incoming and stocked material, equipment and supplies. Essential Functions: • Perform tasks that require manually moving materials, details, assemblies, tools, and equipment. • Procure parts, details, tools, assemblies, and/or equipment from the warehouse, yard and other departments. • Operate a forklift and complete documents daily for the verification of equipment safety. • Operate overhead crane and documents daily the verification as to safety of equipment. • Performs electronic inventory issues to accomplish APLs. • Perform work area cleanup and safety related duties. • Perform other related duties as assigned by management or as needed by Production for support. • Receive all material, equipment and supplies. • Process all documents electronically pertaining to receiving and works with Accounting to resolve documentation issues • Keep receiving area clean and trash free. • Interfaces with Material Planner in supporting inventory Cycle Count analysis. • Comply with all company policies, procedures and regulations (ISO and EHS) • Work during scheduled hours in support of Production schedules • Maintain quality output while meeting department production requirements. • Support the needs of the operators and lead person. • All deliveries received and distributed with all receiving documents processed accurately and input in computer by the end of the next business day. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High school graduate or equivalent preferred. • Shipping and receiving experience in a fast-paced manufacturing environment. Knowledge, Skills, and Abilities • Computer skills for data entry. • Reading comprehension skills to understand work orders, written instructions and drawings. • Math skills to perform basic calculations. • Oral communication skills to exchange information with co-workers and supervisors. • Interpersonal skills to cooperate and work effectively with others. • Ability to work under time pressure. • Hand coordination, depth perception. • Ability to see small detail. • Ability to stand for long periods of time. Company Name:  General Dynamics C4 Systems Apply for this Position   10/03/08    Manufacturing Associate Summary: Assembles parts, equipment, and their subassemblies following blueprints and other written and verbal specifications by performing the following duties. Essential Duties and Responsibilities include the following. Other duties may be assigned. Plans assembly procedures, following specifications. Removes small quantities of metal to clean parts or to produce close fit between parts. Drills, taps, or reams holes. Aligns components, and bolts, screws, or rivets them together. Installs moving parts, such as shafts, levers, or bearings, and works them to test free movement. Tests or assists in testing operation of completed product. Some Material Handling. General Dynamics SATCOM Technologies is an Equal Opportunity Employer/Affirmative Action Employer. We welcome and encourage diversity in our workforce. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., which operationally reports into General Dynamics C4 Systems, Inc. You must be a U.S. citizen or authorized to work in the U.S. in order to work for our company. If you are interested in applying for this position, please go to http://www.gdsatcom.com.1st Piece Inspection Blue Print Hand Tools Power Tools Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   10/01/08    2176 Lead Raw Materials The Lead for Raw Materials verifies all receiving documents of raw materials; enters into the system all documents of the issuance of raw materials. Interfaces with Material Planner to address inventory accuracy problems. Directs the efforts of Raw Materials employees for timely support of manufacturing requirements. Essential Functions: • Electronic issuance of raw materials and receiving of raw materials. • Backup for Materials Planner in reviewing MRP • Leads department in the safest, most efficient and cost effective manner. • Handles all personnel matters for material handlers. • Enforces company work and safety rules. • Supports the requirement to employee’s time reported correctly. • Responsible for maintaining good housekeeping and cleanliness in and around department. • Reports status of all equipment and machinery within the department. • Ensures that all new employees are trained on departmental procedures and detailed trained for their new job duties. • Performs other related duties as assigned by management. • Support the production of quality parts produced in a cost effective and timely manner, with limited inventory variance. • Promotes a cooperative, productive work force and equal employment opportunities. • Complies with Company and departmental policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. Company Name:  General Dynamics C4 Systems Apply for this Position   09/24/08  Production Test Engineer The Rescue 21 Production Test Engineer will be responsible for the factory testing of all deliverables associated with a major, nationwide communications system. This position will be required to: • Conduct acceptance testing and troubleshooting of complex systems, subsystems, and modules in an effective efficient manner. Accurately document tests and procedures. • Demonstrate good analytical capability and current technical knowledge. • Interpret complex engineering drawings, diagrams and schematics. • Generate appropriate testing metrics, analysis and corrective action of defect trends. • Provide technical leadership, troubleshooting guidance, technical support and day-to-day tasking for production test technicians. Ensure all project timelines and goals are met • Effectively interface with customer, sub-contractor and engineering organizations. • Identify capital needs and provide estimates as necessary. BS Degree in a technical field related to test engineering +9 years of demonstrated results, or equivalent experience. Advanced degree recommended. Strong troubleshooting skills, understanding of networking and RF principles, knowledge of test measurement equipment, and strong technical writing ability (test plans, procedures and reports) required. Experience with the integration and test of military communication systems a plus. Knowledge of interface protocols and wireless networking strongly desired. Applicant must be a US Citizen. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   09/18/08   2139 Composites Fabricator III Under general supervision, builds a variety of reflectors using composite materials, and detailed drawings and instructions. Essential Functions: • Bag parts and/or tools for curing to standard requirements. • Layout locations for holes, bushings, inserts, etc. to drawing specifications. • Cut, trim, and drill composite parts to drawing specifications. • Prepare and bond fittings, inserts, etc. to drawing specifications. • Install bushings and other hardware to drawing specifications. • Setup and operate computer controlled curing oven. • Perform miscellaneous tasks using hand tools, power tools, and forklift. • Perform tasks required for lifting and moving parts and assemblies. • Procure parts and supplies as needed. • Lay up molds per drawing specification. • Wet lay up parts per drawing specification. • Set up molds per drawing specification. • Perform work area cleanup and safety related duties. • Perform other related duties as assigned by management. • Comply with all Company policies, procedures and regulations. • Work during scheduled hours. • Maintain quality output while meeting department production. Company Name:  General Dynamics C4 Systems Apply for this Position   09/10/2008     RF Assembler Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus. Applicant must be capable of obtaining a US Security Clearance.   Company Name:  General Dynamics C4 Systems Apply for this Position   08/30/2008   Manufacturing Project Manager Responsible for all aspects of Master Product ion Schedule (MPS) including, but not limited to: - Daily review of MPS to insure completeness, accuracy and validity of the information being projected. - Identification and communication of all MPS issues. - Maintaining of capacity/resource needs within the MPS document. Responsibility for product kickoff - Schedule kickoff meetings for production orders - Assumes complete responsibility for the production plan from the program kickoff on. - Insures that the build plans being submitted have been reviewed by supporting disciplines and are achievable when inserted into the MPS. Tracking, scheduling and reporting of all production programs and engineering programs being pulled into production. Identify and communicate manufacturing bottlenecks or potential problem points that may obstruct product flow. Assist in the creation of cells and workflow establishment making sure that the cells are visual and provide the planners the ability to review material status, kit releases, potential shortages, etc... Track work in progress by reporting daily shipment status and correlate it to actual being invoiced from accounting. Identify, communicate and track material shortages. Track and communicate kit release status. Responsible for manufacturing customer service in regards to the assignment of RMA numbers, maintenance of RMA Log and insuring the appropriate information is obtained prior to issuing an RMA number. Tracking, scheduling and reporting of all RMAs and identify resource constraints or schedule creep. 5+ Years experience working in Manufacturing environment BS or BA degree in a related discipline. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/29/2008   2146 FAC Assembler I Under general supervision, assembles and/or assists in assembling mechanical and electrical components as directed by work orders, using a variety of hand tools and portable power tools, in a timely, quality and cost-efficient manner. • Using blueprints, rough sketches, manuals, and/or verbal instructions, builds complete shipping assemblies. • Performs tasks that require the use of hand tools, power tools and forklift. • Procures materials, parts, tools, and subassemblies, as needed. • Works in a manner that maximizes the use of supplies and materials to prevent waste. • Trains lower-level assemblers. • Performs work area cleanup and safety related duties. • Performs other related duties as assigned by management. • Complies with all General Dynamics SATCOM Technologies policies, procedures and regulations. • Maintains quality output while meeting department production requirements. • Works during scheduled hours. Experience and Education • High School graduate or equivalent preferred. • Minimum three years of mechanical work experience. Knowledge, Skills, and Abilities • Knowledge of basic blueprint reading. • Working knowledge of electrical wiring. • Reading comprehension skills to understand work orders, written instructions, and prints. • Math skills to perform basic calculations. • Interpersonal skills to cooperate and work effectively with others. • Mechanical ability to understand the operation of equipment used in the department. • Good manual dexterity. • Ability to work under time pressure. • Ability to evaluate work conditions and quality of work. Company Name:  General Dynamics C4 Systems Apply for this Position   08/26/2008    RF Assembler Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/14/2008   Manufacturing Engineer This position is for a Manufacturing Engineer on a large development program transitioning into high volume production. The candidate will serve as a focal point to the design team through New Product Introduction (NPI) and into full rate production of software definable radios in multiple different form factors to the US government. They will assume a leadership role during the NPI phase, and then continue to support the project during the production phase. This is a large complex project with over $4B worth of potential follow-on business. The candidate must work as an individual technical contributor as well as leading small task groups. Canidate must also plan and execute project tasks, develop manufacturing plans and strategies for specific products and processes, take initiative in proposing ideas/soliciting input/optimizing solutions, and actively interface with Electrical, Software, System, and Test Engineers on related technical problems. It is strongly desired that the candidate be able to provide direction when required, research and analyze data to determine feasibility of design or process for production, apply technical concepts to specific tasks, identify design alternatives to enhance producibility, support continuous improvement efforts, and be aware of business objectives.The candidate must have knowledge of Printed Wiring Board/Printed Wiring Assembly mechanical design aspects, as well as knowledge of processes involved in manufacturing Printed Wiring Assemblies. They must also be capable of mapping existing and generating new process flows. It is strongly desired that the candidate have exposure to DTUPC cost models, DFM/DFA tools related to electronics manufacturing, risk assessment, tooling design, and CAD software. They should have the ability to interface with contract manufacturers, as well as generate/status/maintain build documentation. Knowledge of make/buy analysis, advanced packaging technologies, and generating schedules is a plus. The candidate must have a BS Degree in a technical field related to manufacturing 5 years of demonstrated results, or equivalent experience involving criteria above. The candidate must have the ability to obtain a DoD Secret level security clearance. Applicant must be able to pass an extended background investigation (EBI) for this position. Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/13/2008   Satellite Communications Systems Engineer • Satellite communications systems design, calculation, and analysis • Specification of technical requirements to Manufacturing, R&D, Purchasing, and Materials Management • Development of systems documentation, test procedures, and training manuals • Supervision of systems assembly and verification of system performance • Specification, inspection, and coordination with Logistics for shipments • Perform program management functions on smaller programs as appropriate • Coordinate and supervise on-site integration and commissioning of these systems as required • Customer presentations and technical discussions • General sales engineering technical support in the preparation of proposals or quotations, as directed • On-going program technical support BEE or BSEE or BET degree, or equivalent work experience 10 years working experience in satellite or communications systems engineering Proficiency in Microsoft Excel, Word, and PowerPoint Solution-oriented, multi-tasking, and self-motivated Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/12/2008   Manufacturing Engineer Principal Strong technical contribution as individual designer. Develops, evaluates, and improves manufacturing methods, utilizing knowledge of product design, materials and parts, fabrication processes, tooling and production equipment capabilities, assembly methods, and quality control standards. Able to work directly with multiple vendors for large quantity manufacturing. Able to evaluate capabilities of potential manufacturing facilities. Works on site with manufacturing sites as needed. Implements and analyzes manufacturing engineering plans and projects. Designs, develops and transfers manufacturing engineering tools, strategies and systems. Develops manufacturing engineering plans and strategies for specific products and processes. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Identifies domain of expertise. Plans sub tasks. Follows direction and makes a significant contribution to the team. Listens to and acts on mentor advice. Begins to understand other commitments and interdependencies. Moves from sub-task optimization to project optimization. Promotes process/policy compliance. Supports continuous improvement initiatives.BS Degree in a technical field related to manufacturing +9 years demonstrated results, or equivalent experience. Advanced Degree and experience in the area of Quality is a plus. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Secret level U.S. DoD security clearance is required. Company Name:  General Dynamics C4 Systems Apply for this Position   08/09/2008  Associate Operations II High School Diploma or Equivalent and three years of applicable experience In addition to all of the duties in a level I associate, performs multiple core tasks of a routine nature in an assigned team, project or functional area including: · Integrating sub-assemblies into final hardware · Loading/unloading feeders · Performing basic electrical tests (i.e., program EPROM's) · Performing basic rework · Packing product · Operating less complex equipment · Performing basic inspection · Performing housekeeping and safety audits · Accurately completing process paperwork · Reading and interpreting basic schematics and drawings · Entering data into the Factory management system Cleaning incoming product to meet customer expectations Team Tasks: · Support continuous improvement activities · Participate in problem solving activities · Help set and work toward team goals · Cross train team members in basic tasks · Support safety/housekeeping standards · Comply with General Dynamics/customer specifications Coach Manufacturing Engineers · Knowledge of polarity and inspection criteria · Basic Manufacturing process skills · Basic knowledge of BOM’s · Basic knowledge of Factory Management systems · Basic knowledge of Statistical Process control (sampling plans, data collection, etc.) · Basic computer skills · Ability to exhibit adaptability/flexibility Applicant must be capable of obtaining a US Security Clearance. Company Name:  General Dynamics C4 Systems Apply for this Position   08/07/2008   Manufacturing Eng I The Information Assurance Operations manufacturing engineering section seeks a Entry level MFG Engineer to support the development, enhancement and maintenance of a variety of products. The MFG Engineer will be an active member of the manufacturing engineering team for all existing products. Will be responsible for supporting manufacturing engineering related activities from producibility through production. Responsibilities include concurrent engineering development, product launch, implementing preferred manufacturing processes, modifying manufacturing plans, optimizing/maintaining process flow information; estimating and tracking production and development costs, assessing and mitigating potential manufacturing risks; and resolving day to day manufacturing related problems. Must have BSME degree. Basic knowledge of SMT processes, backend assembly processes, manufacturing cause and corrective action, production readiness reviews, Design of Assembly, Design of Experiments, developing schedules and budgets, tooling design, and statistical process controls is preferred but not required. IAD Avionics experience is required. IAD Products experience is required. A Secret DoD security clearance is required. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Company Name:  General Dynamics C4 Systems Apply for this Position   08/05/2008    RF Assembler Integrated Defense Systems, Inc., a wholly-owned subsidiary of General Dynamics and a leading manufacturer of defense electronics, is significantly expanding our Southern York County location. We have an immediate need for RF Assemblers. Responsibilities include building cables & electronic assemblies per instructions, ability to mount, solder and replace surface mount components is desired. This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies, Inc. may vary from those available at General Dynamics C4 Systems, Inc. IDSI is an Equal Opportunity Employer/Affirmative Action employer. We welcome and encourage diversity in our workforce. You must be a U.S. citizen or legally authorized to work in the USA in order to work for our company. EOE/AA M/F/D/V Knowledge of IPC-A-610, J-STD-001 assembler procedures/processes & quality specifications relating to soldering is a plus. Company Name:  General Dynamics C4 Systems Apply for this Position   08/02/2008   2152 Expeditor THIS POSITION IS OPEN IN KILGORE, TEXAS The purpose of this job is to ensure the orderly and timely flow of component parts, subassemblies, and assemblies through each department in the group (Panel, Paint, Final Assembly, and Crate Departments) in sufficient time to meet the requirements of the production schedule and fill in as required for any leadman • Prepares a variety of letters, memorandums and reports in an accurate and efficient fashion. • Proofreads typed material. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School graduate or equivalent preferred. • At least one year with the company with a broad range of experience in the manufacturing process and familiarity with the work order system, prints, computers, and terminals. • Complies with SATCOM and departmental policies, procedures and regulations. • Attends Safety Meetings. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. • Reading comprehension skills to understand work orders, written instructions. • Math skills to perform basic calculations. • Transcription skills to relay information in report form to appropriate personnel. • Oral communication skills to exchange information with co-workers, supervisors or other personnel. • Spatial visualization to determine final product character from flat part prints. • Computer literacy to facilitate research of parts in the work order system and parts menu. • Ability to work under time pressure. • Ability to respond quickly and calmly to emergency situations. • Ability to train lower level employees in job related processes in his/her particular field. • Ability to lift 30 pounds without lifting equipment or co-worker's assistance. Company Name:  General Dynamics C4 Systems Apply for this Position   07/30/2008   Electrical/Mechanical Assembler Assembles electronic components, subassemblies, products, or systems per J-Std and IPC-610 Class 3 Standards by performing the following duties with supervision. Essential Duties and Responsibilities: 1. Reads assembly documentation. 2. Receives verbal instructions. 3. Receives written instructions. 4. Identifies hardware. 5. Examines parts. 6. Aligns parts. 7. Solders parts. 8. Utilizes hand tools. 9. Utilizes equipment. 10. Routes and attaches wires and connectors. 11. Attaches hardware. 12. Seals assemblies. 13. Winds coils. 14. Reflow boards to carriers. 15. Replaces defective components and wiring. 16. Cleans assemblies. 17. Completes paperwork. 18. Uses computer and ERP software. 19. Follows ESD procedures. 20. Follows Lean Manufacturing guidelines. 21. Maintains regular and predictable attendance.High school diploma or general education degree (GED); or one to three months experience and/or training; or equivalent combination of education and experience. Is able to obtain IPC-A-610 Certification, J-STD Certification and ESD Certification in the 90-Day introductory period. Company Name: General Dynamics C4 Systems Apply for this Position   07/23/2008   Electrical/Mechanical Assembler Assembles electronic components, subassemblies, products, or systems per J-Std and IPC-610 Class 3 Standards by performing the following duties with supervision. Essential Duties and Responsibilities: 1. Reads assembly documentation. 2. Receives verbal instructions. 3. Receives written instructions. 4. Identifies hardware. 5. Examines parts. 6. Aligns parts. 7. Solders parts. 8. Utilizes hand tools. 9. Utilizes equipment. 10. Routes and attaches wires and connectors. 11. Attaches hardware. 12. Seals assemblies. 13. Winds coils. 14. Reflow boards to carriers. 15. Replaces defective components and wiring. 16. Cleans assemblies. 17. Completes paperwork. 18. Uses computer and ERP software. 19. Follows ESD procedures. 20. Follows Lean Manufacturing guidelines. 21. Maintains regular and predictable attendance.High school diploma or general education degree (GED); or one to three months experience and/or training; or equivalent combination of education and experience. Is able to obtain IPC-A-610 Certification, J-STD Certification and ESD Certification in the 90-Day introductory period. Company Name: General Dynamics C4 Systems Apply for this Position   07/11/2008   Production Supervisor Plans activities of workers engaged in assembling / testing parts or assemblies into units by performing the following duties. 1. Teach and implement the Lean Manufacturing Principles (1X1) 2. Maintaining KANBAN quantities for “Pull” system 3. Follow through with the Material Disposition for all Work In Process related to all Engineering Changes 4. Recommend improvements in Manufacturing Operations/Scheduling 5. Follow up on orders to ensure schedules are met 6. Assist MFG in problem solving activities, in order to help meet customer expectations 7. Communicate with other departments to ensure all necessary items (material or documentation) are available when needed by production personnel 8. Inventory management of Work in Process, Assembled and Finished Goods. 9. Interprets company policies to workers and enforces safety regulations 10. Develops manufacturing plans as required to ensure customer orders are delivered on time 11. Maintains the cleanliness of the facility 12. All other duties as assigned. To perform this job successfully, an individual must be able to perform each essential duty satisfactorily. The requirements listed below are representative of the knowledge, skill, and/or ability required. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions. Education/Experience: Bachelor’s degree (B.A.) from a four-year college or university; or three to five years related experience and/or training; or equivalent combination of education and experience. Company Name: General Dynamics C4 Systems Apply for this Position   07/10/2008   Manufacturing Engineer Works with the IAD Operations Team to facilitate assembly and test efficiencies in a high volume box build environment. Develop and implement project specific manufacturing plans, including OI/VA’s, tooling and techniques to support cost effective flow, achieve test yields and quality standards. Provide analysis and identified areas of improvement utilizing Lean methodologies, ergonomic awareness and special tooling. Interact with Lead Engineer, Process Center Supervisors, SFC, Planners and floor personnel to streamline material flow and reduce labor. Demonstrates initiative, and apply personal talent to achieve practical solutions. Participate as an active member of the project team, and thrives in a team environment. Accept and complies with process/policy requirements. Learns and applies GD culture, policies and processes. BS Degree in a technical field related to manufacturing or equivalent experience. Lean manufacturing methodologies. Experience with SDRC Ideas & Visio is preferred. Applicant must be capable of obtaining a US Security Clearance. Company Name: General Dynamics C4 Systems Apply for this Position   07/08/2008   2138 Radial Assembler I Using detailed instructions, assembles and assists other employees in the production of high-quality reflector radials and other components built in the work center. Essential Functions: • Using panel department tools, assembles high-quality radial components. • Procures needed parts and materials, and moves them to work center. • Rolls form tees to correct contour. • Using inspection tools, evaluates quality of work completed. • Moves completed work to the next work center. • Assists in the training of lower level assemblers. • Assists with other work centers within Dept. 2138 • Performs work area cleanup and safety related duties. • Performs other related duties as assigned by management. • Complies with SATCOM and departmental policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce • High School Graduate or equivalent preferred. • Computer skills preferred. • Reading comprehension skills to understand work orders and written instructions. • Math skills to perform basic calculations. • Oral communication skills to exchange information with co-workers and supervisor. • Interpersonal skills to cooperate and work effectively with others Must be familiar with the following tools and equipment: • Gluing tools • Radial inspection tools • Wrenches • Tape Measure • Riveters • Drills • Metal cutting tools • Dollies • Grinders • Pallet Jack • Sanders • Forklift Company Name: General Dynamics C4 Systems Apply for this Position   07/02/2008    2125 Manufacturing Planner I Creates manufacturing process plans referred to as ROUTINGS. Enters parts and component bills of materials in the electronic database. Responsible for reading blueprints to determine the proper manufacturing processes and sequence. Responsible for addressing the requirements of fixtures, jigs, special tooling, and special measuring equipment. May be called upon to help resolve manufacturing problems. Attends design review meetings and is the first contact between product engineering and the manufacturing group. Essential Functions: • Creates process routings. • Enters bills of material. • Addresses manufacturing problems. • Attends design review meetings. • Advises engineering of manufacturing capabilities. • Performs other related duties as assigned by management • Creates efficient process routings. The efficiency of these routings is determined by how smoothly the products flow through the various stages of production, the cost efficiency, and the quality of the end product. • Creates accurate bills of materials. • Resolves manufacturing problems as they arise on the shop floor. • Relays thoughts and ideas to and from the product/project-engineering department, the shop floor, and other related groups in a professional and business-like manner. • Works cooperatively with all associated departments within the organization. • Complies with all Company policies, procedures and regulations. • Works during scheduled hours. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce Experience and Education • Bachelor degree in engineering or related field with two years technical experience in a manufacturing and machining environment OR • High school graduate with ten years technical experience in a manufacturing and machining environment. Knowledge, Skills, and Abilities • Must be proficient in blueprint reading. • Must have a broad range of knowledge in manufacturing processes, practices and materials. • Knowledge of material shaping, forming, fitting, bonding, welding, machining, cleaning, painting, and assembly. • Must have a working knowledge of computers, printers, and related equipment. Company Name: General Dynamics C4 Systems Apply for this Position   06/18/2008   Quality Engineering Specialist Primary Duties & Responsibilities: Perform Quality Engineering functions such as contract review, quality planning, non-conforming material disposition, failure analysis and process improvement. Participate in the development of processes, methods and metrics for new and existing products. Act as a primary quality contact for the Department of Defense programs. Must be a US Person as defined by 22 CFR 120.15 or a US Citizen, depending on BU Technical Knowledge Required: Practical experience in the application of Six Sigma, Design of Experiments, Lean Techniques and/or other Quality Management techniques. Six Sigma and/or Lean certifications desired. Specific Equipment/Skills: Microsoft Office, Oracle ERP (desired), Minitab (desired) Experienced Desired: 5 years of Quality or Manufacturing Engineering Must be an effective leader/facilitator and possess good communication skills. Education Desired: B.S. Industrial Technology, Mechanical or Manufacturing Engineering, Quality Engineering, or related field. Company Name: DRS Technologies Inc Apply for this Position   03/26/2008    SR. Manufacturing Engineer Senior Manufacturing Engineer Reports To: Vice-President of Operations Position Responsibilities Develop and document time standards / processes for all manufactured products including Instruments, Filters, Components, EAS and Sub-Systems Act as production liaison to Product Engineering on planning and transitional issues related to emerging and developing products in terms of product structure, RoHs compliance, documentation, identification of tools and fixtures , prototype builds, and other issues Develop, document, and catalog assembly / test fixtures as required for all manufactured products Review and approve all Engineering /ISO documents released to various Production departments Review, approve and communicate ECN’s on behalf of various production departments, Value Engineering Ongoing evaluation of existing processes and fixtures for efficiency improvements, Ongoing review of product structure and material content for cost savings and SKU reduction Review all documentation packages, products, practices, and processes for manufacturing and cost improvement opportunities. Participate in MRB meetings as required Work with Purchasing in resolving technical issues with Contract Manufacturers as required Evaluate and recommend required (production) capital equipment. Assume responsibility for RoHs compliance and maintenance for released products and conversion of non-RoHs products. All other special projects and duties as required by management. Requirements At least 5 years progressive experience in manufacturing support, process and fixture design, CAD, problem solving, and product documentation practices in an RF environment. Excellent written and oral communications skills Ability to utilize software applications such as Excel, Word, Project, and Autocad . Familiarity with Eagleware and other design suites is a plus An Engineering Degree is desirable but not required if life experience is adequate Demonstrated mechanical and RF aptitude Training and /or experience in designing for product manufacturing Ability to work cooperatively with all employees and management. Working knowledge of MRP and Inventory Control practices Company Name:  Defense Talent Network Exe Search   Apply for this Position   02/04/2008    Manufacturing Engineer Responsible for providing technical support to the manufacturing production lines building Traveling Wave Tube Amplifier (TWTA), Klystron Power Amplifier (KPA) and Solid State Power Amplifier (SSPA) products. Support will include specifying state of the art manufacturing processes, optimizing existing manufacturing processes, optimizing existing mechanical designs, specifying new mechanical designs, creating bills of materials for new products, generating ECOs for new and existing products, root cause analysis of production issues and implementation of corrective action. Skills/Training Required: Design and introduction of derivative products into production Document mechanical design modifications to existing products. Day to day disposition of discrepant material Hands on troubleshooting of manufacturing issues Creating rework instructions Addressing Engineering change requests Writing Engineering Change orders Implementing lead free solder into the manufacturing process Specifying and testing packaging material Training operators on the operation of the vibration system Testing new and existing products for vibration Specifying high voltage potting materials and processes Specifying and evaluating fan and blower assemblie. Perform mechanical design and build production tooling... Company Name: Xicom Technology Apply for this Position   11/09/2007    Sr. Manufacturing Engineer Candidate should have a BSME or related degree with 2+yrs DOD or Aerospace exp. Lean Six Sigma, ISO, FAR standards . Must be able to prepare work orders detailed manufacturing plans/prod. drawings for DOD Aircraft Structural platforms. Prioritize tool design, methods, and material procurement. Skills in CAITV, Autocad and basic Catia usage. Capabilities in SPC, process mapping,sketch concept, Geometric dimensioning ,tolerance,& root cause analysis. Coordinate with Process, Quality and upper management. US citizen, well spoken, Client contact, 10% travel. Co. prefers Contract to Hire. Will consider straight perm interview. 65K-75K perks. DOE Full benefits, Relocation available. Company Name: Confidential Apply for this Position   09/12/2007   Manufacturing Test Engineer Responsible for providing Manufacturing with technical support in: RF Test, Power Supply Test, System Test, and New part/product introduction. Provide technical direction to the test areas to troubleshoot and repair product. Improve the manufacturing test and screening processes that result in cost reductions and increased throughput, and higher reliability. Create and maintain test procedures and specifications. Evaluate microwave components and suppliers. Create Bill of material (BOM) and ECO generation. Failure analysis of various assemblies and components. Provide day to day support to the production lines. Assist Engineering as needed with new product introduction into Manufacturing. Skills/Training Required: · Candidate must have experience using or manufacturing high power microwave devices such as TWTs or Klystrons. · Candidate must be skilled in specifying, and performing high power RF test processes. · Candidate must have experience in cost reduction and reliability improvement through testing and screening. · Candidate must have experience working in a fast paced production environment. · Experience designing products for airborne applications a plus. High Voltage work experience is a plus Years Experience Required: At least five years of experience specifying, and performing RF test processes with high power microwave devices such as TWTs or Klystrons. Education Required: B.S. Degree in Electrical Engineering or equivalent Company Name: Xicom Technology Apply for this Position   07/31/2007   Manufacturing Engineer Focus will be to target programs for cost reduction, process improvements and cycle time reduction, including support to resolve process or material related issues. Will also support the new projected business. RequirementsExperienced in manufacturing processes and cost improvements in the following areas: substrate assemblies, PWB assemblies and higher level integrated RF assemblies, epoxies, solders, sputtering, metallization, machining, material analysis, chemical analysis and failure analysis. Develop manufacturing documentation, tooling and fixtures (AutoCAD experience) for high reliability space and military products. Familiar with MIL-SPECS, device screening and environmental/Qual testing Provide technical support to customers and suppliers Company Name: Defense Talent Network Exe Search Apply for this Position   04/06/2007   SR. Manufacturing Engineer At least 5 years progressive experience in manufacturing support, process and fixture design, CAD, problem solving, and product documentation practices in an RF environment. Excellent written and oral communications skills Ability to utilize software applications such as Excel, Word, Project, and Autocad . Familiarity with Eagleware and other design suites is a plus An Engineering Degree is desirable but not required if life experience is adequate Demonstrated mechanical and RF aptitude Training and /or experience in designing for product manufacturability Ability to work cooperatively with all employees and management. Working knowledge of MRP and Inventory Control practices Position Responsibilities Develop and document time standards / processes for all manufactured products including Instruments, Filters, Components, EAS and Sub-Systems Act as production liaison to Product Engineering on planning and transitional issues related to emerging and developing products in terms of product structure, RoHs compliance, documentation, identification of tools and fixtures , prototype builds, and other issues Develop, document, and catalog assembly / test fixtures as required for all manufactured products Review and approve all Engineering /ISO documents released to various Production departments Review, approve and communicate ECN’s on behalf of various production departments, Value Engineering Ongoing evaluation of existing processes and fixtures for efficiency improvements, Ongoing review of product structure and material content for cost savings and SKU reduction Review all documentation packages, products, practices, and processes for manufacturability and cost improvement opportunities. Participate in MRB meetings as required Work with Purchasing in resolving technical issues with Contract Manufacturers as required Evaluate and recommend required (production) capital equipment. Assume responsibility for RoHs compliance and maintenance for released products and conversion of non-RoHs products. All other special projects and duties as required by management. Company Name: Defense Talent Network Exe Search Apply for this Position   03/15/2007   OPERATIONS ASSOCIATE ASSEMBLY IV RESPONSIBILITIES: ' Meet production schedules, productivity goals, and quality standards ' Perform assembly, inspection, test, and rework operations in compliance with instructions and ISO 9000 requirements ' Soldering & wiring ' Optical fiber splicing ' Mechanical assembly ' Visual inspection, mechanical inspection & electrical testing ' Material handling, material control, and storage ' Maintain a clean and safe work area ' Production equipment operation & maintenance ' Identify, segregate, and disposition nonconforming material ' Marking & labeling product, equipment, and containers ' Material receipt, handling, & storage (includes material control & cycle counting) ' Packing & shipping operations ' Perform Shop Floor Control System data collection, SPC charting, & record keeping ' Enforce quality, safety, calibration, inventory and ESD control practices ' Train associates & peers ' Participate in corrective and preventive action to improve product quality & productivity ' Promote teamwork by helping others and being a good teammate ' Support customer visits & audits ' Understand and practice safety policies and procedures in the work place. 2. AUTHORITY: ' Consistent with Responsibilities 3. INTERFACE WITH OTHERS: ' This position will interface with all organizations as required to perform job responsibilities. Primary interface is with the test technicians, shop supervisor and process engineering. 4. MINIMUM QUALIFICATIONS: ' Education: High School Diploma or equivalent required, A.S. degree preferred ' Certifications preferred: ESD, forklift, blueprint reading, soldering, solder inspection, solder rework, fiber splicing, metrology ' Skills required: basic math, reading comprehension, visual inspection, mechanical assembly, soldering, ESD prevention, safety ' Skills preferred: component identification, quality improvement techniques, fiber splice, metrology methods (verniers, micrometers, gage blocks, etc.), industry workmanship standards, material control, MRP software, PC software applications, visual aids, ISO 9000 standards ' Experience: Three years previous experience in electronic assembly and test preferred ' Must meet pre-employment testing qualifications. Company Name: The Couture Group, Inc. Apply for this Position   03/15/2007   PROCESS ENGINEER III Job Description - MFA MANUFACTURING/MATERIALS ENGINEER FOR RF MICROSTRIP AND STRIPLINE ASSEMBLIES * Develop and document assembly methods for the manufacture of Multi-Function Assemblies including: * Connector installation * Epoxy and solder circuit attach (soft-board and ceramic) * Epoxy and solder die attach * Wire bonding (thermo-compression and ultrasonic) * Laser welding * Finishing (paint, marking, and laser engraving) ' Circuit Board Fabrication ' Surface Mount assembly * Develop procedures for handling and cleaning of components and assemblies including those which contain MMIC devices * Possess and apply knowledge of the theoretical bases for manufacturing processes and materials, such as: * Epoxies ' Encapsulants ' Conformal Coatings * Solders * Solvents * Plating * Metallurgy * Apply and interpret state-of-the-art analytical and design tools, such as: * Thermal analysis * Structural analysis * Design of experiments * Finite element analysis * SEM * Auger * CAD/CAM * Possess and apply mechanical aptitude and mechanical design capabilities to tasks such as: * Fixture design and development * Development of machine schedules (epoxy dispense, pick & place, wire bonding, etc.) * Develop automated assembly techniques for: * Epoxy dispense * Pick and place * Wire bonding * Chip-on-board * Carrier level testing ' SMT * Develop and execute IR&D and qualification plans for manufacturing materials and processes. * Develop and execute continuous improvement plans for both cost and reliability * Lead assembly teams to meet throughput and quality requirements * Perform failure analyses and develop corrective action plans for process and mechanical related failures * Also responsible for: * Capital equipment selection and set-up * Process documentation and revisions * Material dispositions Education/Experience Requirement: B.S. with a minimum if 5 years experience or M.S. with a minimum of 2 years experience ' Security Clearance is required ' Overtime (As required) ' Some travel is required. Company Name: The Couture Group, Inc. Apply for this Position   03/15/2007    Senior Product Engineer-SPE Job Description - Lead the RF architecture design, development, characterization and comparison of emerging RFID platforms and technologies. The ideal candidate will possess a demonstrated broad and deep understanding of modern commercial radio design and communications systems, including software defined radios, linear transmitters, high sensitivity receivers, interference mitigation, design miniaturization, high reliability and design to cost. Understanding of and effective interface with companion disciplines, including antennas and propagation, digital circuits, embedded software, and networking systems is vital. The candidate will provide expert guidance in quantifiably assessing multiple divergent technologies and implementation approaches for their respective strengths and weaknesses in real world environments, and the ability to research and apply technology standards and associated protocols is a must. Project leadership is expected, with the potential for larger team management in future. BSEE and 12+ years design engineering experience, including specific RF architecture design, development, characterization and comparison of emerging RFID platforms and technologies. Advanced degrees may be applied toward a portion of the experience requirement. Company Name: The Couture Group, Inc. Apply for this Position   03/15/2007    SUPERVISOR MANUFACTURING Job Description - ' Perform Management Duties for the Following Functions and Areas: ' Production assembly, inspection, test, troubleshoot, and rework operations ' Shop Floor Control (Quality, Inventory Accuracy, ESD Control, Safety) ' Lead and supervise activities as required to meet production goals ' Maintain shop quality control processes and comply with ISO 9000 Requirements ' Develop and manage an effective shop floor control process including material control, ESD control, safety, and cleanliness ' Develop and maintain shift schedules and capacity requirements plans ' Staff and ensure training of production personnel ' Develop and maintain production equipment maintenance & calibration program ' Develop and maintain ESD control program and associated supplies ' Train others in the use of the maintenance & calibration software applications ' Train others on ESD control processes and procedures ' Perform audits to ensure compliance to ESD and calibration process and procedures ' Develop and maintain an effective shop change control process ' Develop and manage time keeping process, including attendance policies ' Develop and maintain work instructions, performance metrics, and records for shop floor activities ' Budget, manage, and maintain shop expense supplies ' Provide periodic performance feed back and reviews for assigned personnel ' Promote teamwork by helping others and being a good teammate ' Lead corrective and preventive action to improve product quality & productivity ' Support customer visits & audits ' Support company and facility Environmental Safety and Health (ES&H) policies and programs by: - supporting and meeting annual and long-term ES&H objectives - including ES&H principles in shop procedures, equipment purchases, and equipment/product design - attending appropriate ES&H training - providing information for accident and incident investigations and assisting in implementation of corrective actions. Company Name: The Couture Group, Inc. Apply for this Position   01/15/2007     Manufacturing Engineer I Job Description - Support the production of new and existing products in a group that designs and manufactures antennas, connectors and cable assemblies for the space and defense industry. Responsibilities include reviewing new designs and making changes to improve manufacturability, writing final assembly procedures, and troubleshooting manufacturing problems. The engineer will also work to improve yields through the use of statistical process control and generate maintenance procedures for equipment. The engineer will identify tooling requirements and work with the tooling engineer in designing new tools that use the principles of 'mistake-proofing'. The engineer will work with production to set up continuous flow cells to assemble cables. Experience -: B.S. or M.S. in Engineering and five years of related experience. Job requirements: Must have excellent mechanical aptitude. Candidate must also have good writing skills and be willing to work in a dynamic environment. Experience or training in lean manufacturing principles and statistical process control is a plus. Degree(s) in Mechanical, Industrial, or Chemical Engineering preferred. United States Citizenship or permanent residence required. Security clearance may be required. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position   01/15/2007     Senior Production Engineer Job Description - * Develop and document assembly methods for the manufacture of telemetry and data link modules for both aerospace & defense and industrial/commercial applications: * Circuit board fabrication ' Surface Mount Assembly ' Connector installation * Epoxy and solder circuit attach (soft-board and ceramic) * Epoxy and solder die attach * Wirebonding (thermo-compression and ultrasonic) * Laser welding * Finishing (paint, marking, and laser engraving) * Develop procedures for handling and cleaning of components and assemblies including those, which contain MMIC devices * Possess and apply knowledge of the theoretical bases for manufacturing processes and materials, such as: * Epoxies ' Encapsulants ' Conformal coatings * Solders * Solvents * Plating * Metallurgy * Apply and interpret state-of-the-art analytical and design tools, such as: * Thermal analysis * Structural analysis * Design of experiments * Finite element analysis * SEM * Auger * CAD/CAM * Possess and apply mechanical aptitude and mechanical design capabilities to tasks such as: * Fixture design and development * Develop and execute IR&D and qualification plans for manufacturing materials and processes * Develop and execute continuous improvement plans for both cost and reliability * Lead design and assembly teams in design for manufacturing, Six Sigma processes, throughput and quality requirements * Perform failure analyses and develop corrective action plans for process and mechanical related failures * Also responsible for: * Process documentation and revisions * Material dispositions Experience - ' Education/Experience Requirement: B.S. with a minimum if 5 years experience or M.S. with a minimum of 2 years experience ' Candidate must have strong communication skills and be a 'Team' player ' U.S. citizenship is required. Security clearance may be required. ' Some travel may be required. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position   01/15/2007     Manager Production I Production management experience preferably in medium to high volume electronics. Will manage a group of over 20 people on three shifts. Ability to maintain consistent output of high quality products in a challenging product area is essential. Experience - Bachelor's Degree plus 4 years experience. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position   01/15/2007     Engineer - Manufacturing / Production Job Duties ' Lead yield improvement efforts on short range sensor and ARS200. ' Oversee troubleshooting of production failures ' Participate in design for manufacturing efforts for new products specifically the SiGe short range sensor Experience - Desired Experience/Skills: 5+ years RF/microwave experience Minimum Requirements: BSEE plus related work experience. COMPANY INFORMATION COMPANY is a world leading developer and manufacturer of radio frequency (RF) and microwave semiconductors, components and IP Networks to the wireless telecommunications and defense-related industries. COMPANY'S products include semiconductor devices, RF integrated circuits, passive and control devices, antennas, subsystems and systems. The commitment of COMPANY to the wireless market has enabled COMPANY to strengthen its position as the industry leader. Company Name: The Couture Group, Inc. Apply for this Position   01/11/2007   Aircraft Manufacturing Engineer The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. The Manufacturing Engineer investigates solutions to engineering and production problems of limited scope and impact. He/she documents manufacturing processes. She/he participates on engineering and manufacturing teams to improve product quality. He/she ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. He/she uses process engineering principles and techniques. She/he develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations. He/she performs trade and cost studies and assists in leading integrated product and process teams. Company Name: Dusek Network Inc. Apply for this Position   01/11/2007   Aircraft Manufacturing Engineering Manager The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. The Manufacturing Engineering Manager leads the team of engineers to investigate solutions to engineering and production problems of limited scope and impact. He/she leads and establishes the processes to document manufacturing processes. She/he participates on engineering and manufacturing teams to improve product quality. He/she ensures the identification and implementation of advanced manufacturing technologies and improves manufacturing processes in support of the type design. He/she provides quidance for process engineering principles and techniques. She/he develops, establishes, and guides requirements for assembly, tooling simulations, and manufacturing configurations. He/she manages trade and cost studies and assists in leading integrated product and process teams. Company Name: Dusek Network Inc. Apply for this Position   01/05/2007   Technical Purchasing Agent The successful candidate MUST have a bachelor’s degree in an Engineering discipline from an accredited educational institution. Prefer at least five years purchasing experience in a manufacturing environment. Special knowledge/skills required: knowledge of business principles such as purchasing; knowledge of Federal Acquisition Regulations; excellent written and oral communication skills; ability to organize and prioritize multiple work assignments and work with little supervision; experience in CPSR audits preferred; familiar with Small Business reporting preferred. The successful candidate must have experience preparing bid packages, analyzing and evaluating proposals, negotiating subcontract provisions and writing statements of work and terms and conditions for the procurement of specialized materials, equipment and services. The successful candidate must be able to evaluate engineering requirements and evaluate supplier capabilities and monitor supplier schedules to assure successful completion to purchase order requirements. Company Profile: For over 20 years, L-3 Display Systems has been selling well-engineered products. Backed by powerful parent company, L-3 Communications, we're a small division that's big on brilliant ideas for highly engineered rugged display systems for military and commercial platforms. Company Name: L-3 Communications Display Systems Apply for this Position   11/10/2006  Product Engineer Description Responsible for product design and validation, including documentation, evaluation and deployment of products. Responsible for working closely with planning, procurement, manufacturing, engineering, design/drafting, assembly, test and production personnel in the development, design, validation and deployment of cost effective, reliable products. Also responsible for modification, validation and deployment of the design changes of existing products. Analyzes and specifies equipment to establish solutions to complex problems. Conducts experimental tests and evaluates results. Selects and specifies components and equipment based on analysis of specifications and reliability criteria. Also reviews vendor capabilities and makes vendor recommendations. Responsible for oral and written presentations, project planning, design reviews and reports for customers, colleagues and management. Qualifications/Competencies: Knowledge and experience of microwave (5-26.5 GHz) and/or millimeter wave (26.5-50 GHz) products and technologies Knowledge and experience of cascaded RF chain design including: Gain Amplitude and phase flatness Noise power Intermodulation, spectral re-growth and noise power distortion Phase noise Spurious Temperature and vibration induced issues Knowledge and experience with: Specifying microwave components Microwave/millimeter wave component vendors Isolators, Filters, Waveguide Assemblies, Solid State Amplifiers, Linearizers, Cables etc Knowledge and experience with: Phase noise AM/AM & AM/PM Phase matching Knowledge and experience of devices including: Power Amplifiers (25 watts) Frequency converters (up and down) Low noise and medium power solid state amplifiers PIN diode attenuators Pre-distortion Filters Mixers Couplers Power combiners Power dividers Waveguide components and transitions Knowledge and experience of mechanical packaging Knowledge and experience digital and analog control systems Knowledge and experience of power supplies Strong knowledge and experience of root cause identification Knowledge and experience with MIL-STD requirements and testing Company Name: Xicom Technology Apply for this Position   11/10/2006  Manufacturing Engineer Provide technical support to the manufacturing production lines building Traveling Wave Tube Amplifier (TWTA), Klystron Power Amplifier (KPA) and Solid State Power Amplifier (SSPA) products. Support will include specifying state of the art manufacturing processes, optimizing existing manufacturing processes, optimizing existing designs, specifying new designs, creating bills of materials for new products, generating ECOs for new and existing products, root cause analysis of production issues and implementation of corrective action. Essential Duties & Responsibilities: Design and introduction of derivative products into production Day to day disposition of discrepant material Hands on troubleshooting of manufacturing issues Creating rework instructions Addressing Engineering change requests Writing Engineering Change orders Implementing lead free solder into the manufacturing process Specifying and testing packaging material Training operators on the operation of the vibration system Testing new and existing products for vibration Specifying high voltage potting materials and processes. Specifying and evaluating fan and blower assemblies. Computer Skills and/or Tools: MS Office, FED EX shipping software and UPS shipping software Qualifications/Competencies: Applicant must have a strong hands on mechanical background, ability to work well with production personnel, enthusiastic with documenting designs and processes, and working knowledge of RF test and troubleshooting Education and/or Experience: 4 Years of relevant experience. BSME or equivalent technical background. Experience with Microwave test. Specifying crimp and solder connections. Experience with high voltage a plus. Experience performing airflow measurements and troubleshooting vibration issues using a shaker table. Company Name: Xicom Technology Apply for this Position   11/8/2006   Aircraft VP of Manufacturing The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. Our Client has an immediate opening for a Vice President of Manufacturing. We are searching for a dynamic leader who has experience transitioning from a small business Jet R&D program to a full scale production program. Start up experience within the aerospace industry is necessary, as well as understanding and experience in the concepts of the manufacturing process in any phase of the production cycle program. The Vice President of Manufactuuring will participate as a member of the Executive team developing the strategies and operations of the business and will report directly to the Chief Executive Officer. The qualified individual will possess a B.A. in Engineering with 10 years plus of progressive management responsibilities. Company Name: Dusek Network Inc. Apply for this Position   11/8/2006   Aircraft Vice President of Engineering The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. Our Client has an immediate opening for a Vice President of Engineering. We are searching for a dynamic leader who has experience transitioning from a small business Jet R&D program to a full scale production program. Start up experience within the aerospace industry is necessary, as well as understanding and experience in the concepts of the manufacturing process in any phase of the production cycle program. Company Name: Dusek Network Inc. Apply for this Position   11/6/2006  Manufacturing Process Candidate must have proven track record of managing technical semiconductor staff and managing to product line demands. Experience with both silicon and GaAs required; may consider strong candidate with experience in either. Strong understanding and track record of managing to Operational goals and statistical / yield improvements essential. This position is a KEY contributor position with high visibility Require 10 years minimum of Operations management experience, particularly in a semiconductor fabrication facility. Candidate must be degreed engineer (electrical or chemical) at bachelors level minimum. MBA and/or masters level candidate preferred. Company Name:  Defense Talent Network Exe Search Apply for this Position   11/6/2006  Production Manager Our client is a world leading developer and manufacturer of radio frequency (RF) a