Mechanical Jobs

	Mechanical Jobs (Mechanical Engineering, mechanical design...)
11/13/2008 Mechanical Engineer IDSI-GD is seeking an experienced mechanical engineer with hands-on experience and product implementation for electronic packaging applications. The right candidate must be able to work closely with lead electrical engineers to accommodate circuit design and mechanical requirements. Candidate will be responsible for proper RF shields, cabling and chassis designs. We are seeking extensive experience in structural analysis and thermal simulation tools. The candidate should possess the ability to perform cost analysis, mechanical BOM generation, CFD analysis, FMEA, tolerance analysis, and implementation of mechanical test plans. The candidate should possess hands-on experience in the use of Pro-E or Autocad software tools, and Solidworks, IcePack or Flowtherm software tools. The candidate should have a BS in Mechanical Engineering with relevant industry experience of 5-10 years. Should be a team player and possess great communications skills. Applicant must be capable of obtaining a US Security Clearance... Company Name: General Dynamics C4 Systems Apply for this Position
11/12/2008 Contract Mechanical/Design Engineer Contract Mechanical/Design Engineer. Position is in Prescott Valley, AZ and on-site work is required. You MUST have SolidWorks or ProE, with a strong desire to learn SolidWorks. The job consists of the following: Drafts detailed and desinged drawings of electromechanical and electro optical components and parts. Provides the mechanical design and FE analysis for products manufactured by the company and acts as a technical liaison with contract manufacturers and vendors of components and subassemblies used in the Night Vision System products... Company Name: General Dynamics C4 Systems Apply for this Position
11/06/2008 Mechanical Engineer III Duties include: • Mechanical engineering, design and analysis of fabricated components and assemblies • Designs of mechanisms (specifying materials, bearing selection, etc.), electronics packaging and thermal management. • Comfortable working with vendors to integrate their products in our systems. • Preparing project submittals (drawings, reports, etc.), completing structural analyses and selection of purchased components. • Process engineering chance notices (ECN’s) to existing drawings. The qualified candidate will have the following skills and attributes: • Must have at least two years of work experience with 3-D drawing systems • Must be proficient with Solid Works, Inventor, Solid Edge or Pro-E • Must have the ability to successfully create the 3-D mechanical models. • Must be able to successfully use hand analysis methods. • Must be able to process engineering chance notices (ECN’s) to existing drawings. • Must have strong computer skills with the ability to work quickly, efficiently and accurately. • Must have a working knowledge of drafting procedures. • Requires experience with MS Outlook, Excel and Word. • Bachelor of Science in Mechanical Engineering... Company Name: General Dynamics C4 Systems Apply for this Position
10/25/2008 Mechanical Designer IV (Part-Time) Designs and develops CAD models and layouts for mechanical systems. Requires at least six years of experience in the field or in a related area. Must be familiar with a variety of the manufacturing and field concepts, practices, and procedures. Relies on experience and judgment to plan and accomplish goals. Performs a variety of complicated tasks. Typically reports to a lead Mechanical Engineer. Duties include: • Works under the direction of a Mechanical Engineer • Creates and maintains 3-D models • Designs fabricated components and assemblies for Mechanical Engineers. • Designs of mechanisms (specifying materials, bearing selection, etc.), structural design, and electronics packaging • Works with vendors to integrate their products in our systems • Prepares project submittals (drawings, 3D views, etc.) • Processes engineering change notices (ECN’s) to existing drawings A qualified candidate will possess the following skills and abilities: • Minimum of six years working experience with 3-D drawing systems. • Proficiency with Solid Works and PDM Works required • Must have the ability to successfully create 3-D mechanical models • Must have the ability to create drawings from 3-D models • Require knowledgeable of welding and weld symbols • Working knowledge of Geometric Dimensioning and Tolerancing (GD&T) • Ability to process engineering change notices (ECN) to existing drawings. • Strong design and drafting skills with ability to work quickly, efficiently and accurately. • Exhibit a strong working knowledge of design and drafting procedures. • Provide consistent and high quality 3-D models and drawings. • Associates degree in Engineering Technology or related field, or equivalent work experience. • Minimum of 4 plus years related experience required... Company Name: General Dynamics C4 Systems Apply for this Position
10/21/2008 Mechanical Engineer We provide and fully support total IT solutions. Customers can fulfill all of their computing and network needs with CTD’s full line of rugged and semi-rugged computers, network equipment, and peripherals. Using CTD’s technical services, customers can build and implement total solutions that meet their exact needs. CTD’s rugged and semi-rugged computer products include a full line of handheld, laptop, tablet, and palm-top computers; networking products include servers, storage devices, and wireless networking components; and edge devices include displays, workstations, printers, and faxes. CTD’s technical services offerings include systems integration; wireless network design and integration; and worldwide end-to-end life cycle support. Our customers include all branches of the U.S. Military; public-safety organizations; and commercial field services in the insurance; communication, utilities, transportation, and telecommunications industries worldwide. CTD has approximately 900 employees at facilities in the United States, Canada, Europe, and Asia. Opening for Mechanical Engineer responsible for the design and packaging of rugged electronic systems and subsystems. Candidate will participate as an active member of project design teams. Design activities include the creation of detailed engineering drawings, assembly drawings, bills of material, thermal analysis, and dynamic analysis. Also responsible for the development of concept designs and analysis to support proposal efforts. The candidate should have a strong background in 3D computer modeling, manufacturing techniques, and environmental testing. Requires good analytical capability and current technical knowledge.The candidate is required to hold a BS Degree in mechanical engineering +5 years of demonstrated results, or equivalent experience. The candidate must be experienced with solid 3D computer modeling software such as SDRC or Pro/Engineer. Regular contact with senior levels of internal work groups within a project and across a single engineering dept. Travel to customers/suppliers may be required. Participates well in team projects and interacts well with others to produce positive group results. Must be able to travel 20% of the time. Applicant must be a US Citizen... Company Name: General Dynamics C4 Systems Apply for this Position
10/01/2008 Mechanical Design/PCB Layout The responsibilities of this position will include, but are not limited to, Schematics in Orcad, DX Designer or equivalent, PCB layouts in AutoCAD, Altium (Protel), PADS or equivalent. Experience in mechanical chassis and RF shielding designs is highly desirable. Experience in creating both top and low level assembly bills of materials, the ability to develop complete detailed drawings and to assist in incorporating Engineering Change Notices is a plus. This individual must have the ability to work closely with engineering design personnel and to complete assignments on time. The selected candidate will have experience in both AutoCAD and Solid Works or equivalent programs. The individual must have great communications skills, must be able to multi-task and must be willing to work demanding schedules. Requirements: • 5-10 Years of directly related experience • Board Layout, Schematic Capture • Minimum of Associates degree in drafting/electronics technology or equivalent experience. Applicant must be capable of obtaining a US Security Clearance... Company Name: General Dynamics C4 Systems Apply for this Position
09/24/2008 Structural/Mechanical Engineering Manager Some responsibilities include but are not limited to: • Managing engineering projects for new and existing antennas, radio telescopes, and other sophisticated instrumentation • Managing advanced projects in the field of structural and mechanical engineering • Provide hands-on engineering expertise in structural/mechanical design, pointing error analysis, deformation analysis, and dynamic analysis • Identify and allocating manpower and resources to assure completion of established objectives within budgetary and schedule guidelines while upholding high technical standards • Contribute to writing proposals • Prepare material for design reviews • Managing designers and/or small group of engineers • Selecting and working with subcontractorsRequired experience/knowledge: • 10+ years of antenna structural/mechanical design engineering related to large dish antenna design • BS Structural/Civil Engineering or equivalent • Fabrication standards • Structural/mechanical design codes • Statement of work • FEA modeling and analysis (NASTRAN, ANSYS, or similar) • Autocad • Structural optimization methods • Familiarity with costing and contracts Desired experience/knowledge: • MS Structural/Civil Engineering or equivalent • SolidWorks • Design of antennas and/or radio telescopes • CFRP structure design and analysis • Project engineering • Group leadership Company Name: General Dynamics C4 Systems Apply for this Position
09/23/2008 Mechanical Engineer Staff We provide and fully support total IT solutions. Customers can fulfill all of their computing and network needs with CTD’s full line of rugged and semi-rugged computers, network equipment, and peripherals. Using CTD’s technical services, customers can build and implement total solutions that meet their exact needs. CTD’s rugged and semi-rugged computer products include a full line of handheld, laptop, tablet, and palm-top computers; networking products include servers, storage devices, and wireless networking components; and edge devices include displays, workstations, printers, and faxes. CTD’s technical services offerings include systems integration; wireless network design and integration; and worldwide end-to-end life cycle support. Our customers include all branches of the U.S. Military; public-safety organizations; and commercial field services in the insurance; communication, utilities, transportation, and telecommunications industries worldwide. CTD has approximately 900 employees at facilities in the United States, Canada, Europe, and Asia. The successful candidate will support all technical aspects of a large defense program and understand its development processes and system engineering practices. Designs and analyzes mechanical systems, and equipment. Conducts feasibility studies and tests new and modified designs. Prepares detailed design, design testing and prototype fabrication. Also includes activities involved in fabrication, operation, application, installation, and repair of mechanical products and systems. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Role model. Skilled at executing complex tasks. Bridges communication across the team. Mentors less experienced engineers. Participates in development of technical strategies and teaming strategies on project. Leads small technical proposals and contributes to medium sized proposals. Advocates continuous process improvement. BS Degree in mechanical engineering 7 years of demonstrated results, or equivalent experience. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Company Name: General Dynamics C4 Systems Apply for this Position
09/18/2008 2152 Mechanical Technician II-DF THIS POSITION IS OPEN IN KILGORE, TEXAS Works under general guidance to perform alignment, calibration and inspection operations on small antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures. Essential Functions: • Performs small antenna assembly operations and product inspections. • Identifies and reports material discrepancies to supervisor. • Performs alignments of drive systems components, position readout devices, limit switches and RF reflective surfaces. • Performs calibrations of antenna control units with respect to position readout, travel speeds and travel limits. • Performs other related duties as assigned by management. Efficient and courteous interaction with co-workers, representatives from other departments, customers and suppliers, as discussed above. • High level of dependability with minimal direct supervision. • Complies with Company and departmental policies, procedures and regulations. • Works during scheduled hours. • Maintains quality output while meeting department production requirements. This position is with General Dynamics SATCOM Technologies, which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. Benefit packages and policies of General Dynamics SATCOM Technologies may vary from those available at General Dynamics C4 Systems, Inc. An Equal Opportunity/Affirmative Action Employer We welcome and encourage diversity in our workforce Experience and Education • High school graduate or equivalent. • Two years of experience in a mechanical repair or assembly environment. • Experience with three (3) or more small antenna products to include control systems set-up and basic wiring. Knowledge, Skills, and Abilities • Demonstrate good mechanical aptitude. • Ability to interpret assembly drawings and apply them to work operations. • Ability to comprehend and apply the simple measurement, calibration, alignment and inspection techniques used in assembling and testing small antenna products. • Ability to effectively use the tools and equipment previously listed in this job description. Machines and Equipment Involved: • Safety glasses, gloves and face shields • Fork truck, pallet jack and two-wheel dolly • Standard mechanic’s hand tools such as wrenches, screwdrivers, hammers, etc. • Mechanical, electrical and air-powered tools, such as drills, impact wrenches, grinders, sanders, soldering irons, saws, presses, etc. • Simple specialized mechanical measuring and alignment tools • Multimeter • Overhead crane Company Name: General Dynamics C4 Systems Apply for this Position
09/16/2008 Entry Level Mechanical Engineer This is an entry level position for someone who is majoring or who has majored in Mechanical Engineering. Position requires a bachelor’s degree in Mechanical Engineering plus zero to three years of actual work experience. Duties include: • Mechanical engineering, design and analysis of fabricated components and assemblies • Designs of mechanisms (specifying materials, bearing selection, etc.), electronics packaging and thermal management. • Comfortable working with vendors to integrate their products in our systems. • Preparing project submittals (drawings, reports, etc.), completing structural analyses and selection of purchased components. • Process engineering chance notices (ECN’s) to existing drawings. • Must have zero to two years of work experience with 3-D drawing systems • Must be proficient with Solid Works, Inventor, Solid Edge or Pro-E • Must have the ability to successfully create the 3-D mechanical models. • Must be able to successfully use hand analysis methods. • Must be able to process engineering chance notices (ECN’s) to existing drawings. • Must have strong computer skills with the ability to work quickly, efficiently and accurately. • Must have a working knowledge of drafting procedures. • Requires experience with MS Outlook, Excel and Word. EDUCATION Bachelor of Science in Mechanical Engineering This position is with General Dynamics SATCOM Technologies, Inc., which is a wholly owned subsidiary of General Dynamics Government Systems, Inc., but which operationally reports into General Dynamics C4 Systems, Inc. If you are interested in applying for this position, please go to http://www.gdsatcom.com. Go to "Career Opportunities" and attach your resume to requisition N08-9172. EOE/AA M/F/D/V Applicant must be capable of obtaining a US Security Clearance. Company Name: General Dynamics C4 Systems Apply for this Position
09/10/2008 Sr Mechanical Engineer - Tactical Systems BS Degree in mechanical engineering or equivalent experience. 5+ years job related experience a plus. Duties and Tasks: Works as individual technical contributor. Performs detailed design and test of software, electrical, or mechanical components or subsystems. Designs and analyzes mechanical systems, and equipment. Conducts feasibility studies and tests new and modified designs. Prepares detailed design, design testing and prototype fabrication. Also includes activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and systems. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Participates as active member of project team. Accepts direction from superiors. Integrates well in a team environment. Seeks out mentorship. Listens to mentor. Meets own project execution commitments. Accepts and complies with process/policy requirements. Learns and applies GD culture, policies and processes. Demonstrates initiative, applies personal talent to practical solutions. Business Impact: Works within the trade space defined (cost/schedule/technology). Demonstrates Leadership as follows: Applies knowledge effectively in team environment. Able to accept and integrate constructive feedback. Travel required. BS Degree in mechanical engineering or equivalent experience. 5+ years job related experience a plus. Demonstrates the ability to weigh risks and make progress in the face of uncertainty. Willingly takes on problems and commits to solutions. Interface: Generally within an identified work group. Day to day direction usually from task lead or project leader. Frequent outside business contact. Contact with more experienced technical personnel in mentor/mentee relationship. Job Summary: Designs associated with rack and panel, GFE and COTS equipment mounted within shelter and transported on various vehicles. Plans, coordinates and conducts engineering activities necessary to analyze, design and document engineering requirements. Essential Functions: • Follow instructions of the Engineering Manager. • Develop and analyze structural, mechanical, and electro-mechanical designs to military requirements. • Create, check using ASME Y14.5 and release engineering documents including: drawings, procedures, standards, specifications, database bill of materials. • Act as Project Engineer on special jobs. • Support Marketing, Manufacturing and Field Operations. • Performs other related duties as assigned by management. Non-essential Functions: • Write computer programs to expedite engineering analysis and task. • Investigate and recommend innovative and more cost effective designs. Must be able to function with little to no direction and must take initiative in resolving issues. Machines and Equipment Involved: • Network PC workstation • Software: CatiaV5, Pro-E, Microsoft Office, Various Engineering Programs. Applicant must be capable of obtaining a US Security Clearance and must be a US Citizen. Company Name: General Dynamics C4 Systems Apply for this Position
09/02/2008 Design (Mechanical) Engineer Drafts detailed and desinged drawings of electromechanical and electro optical components and parts. Provides the mechanical design and FE analysis for products manufactured by the company and acts as a technical liaison with contract manufacturers and vendors of components and subassemblies used in the Night Vision System products Company Name: Boeing Apply for this Position
08/30/2008 Entry Level Mechanical Engineer GDC4S is seeking an entry-level Mechanical Engineer, responsible for the detail design (packaging) and testing of communications and networking hardware and systems developed under government contracts. Applicant should have classroom experience and exposure to 3 dimensional mechanical modeling as well as thermal, structural and dynamic analysis and testing. Assignment requires interaction with other systems, electrical, manufacturing, quality assurance, software and test engineers. Contact and interface with customers and suppliers will also be involved. Solid interpersonal, oral and written communications skills are required.BS Mechanical Engineering. Experience with hardware development from concept through final test and delivery is desired. Applicant should be able to read and understand mechanical fabrication and assembly drawings. Familiarity with electrical schematics and machine shop processes is an advantage. Applicant must have good computer skills with knowledge of CAD systems, Microsoft Office products and/or UNIX. Candidates must be willing to travel in support of business needs. A current DoD security clearance will be considered a plus. Applicant must be a US Citizen. Applicant must be capable of obtaining a US Security Clearance. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Company Name: General Dynamics C4 Systems Apply for this Position
08/02/2008 2152 Mechanical Technician I Works under supervised guidance to perform alignment, calibration and inspection operations on small antenna products. Follows instructions obtained from production work orders, drawings, policies and procedures. • Performs small antenna assembly operations and product inspections. • Identifies and reports material discrepancies to supervisor. • Performs alignments of drive systems components, position readout devices, limit switches and RF reflective surfaces. • Performs calibrations of antenna control units with respect to position readout, travel speeds and travel limits. • Performs other related duties as assigned by management. • Keeps workbenches, machinery, tools, equipment and work area clean and safe. • Reports time spent performing direct and indirect work in accordance with current labor reporting procedures. • Provides input to improve products and manufacturing techniques. • Moves materials by hand, with a fork truck, pallet jack and two-wheel dolly. Company Name: General Dynamics C4 Systems Apply for this Position
07/30/2008 Entry Level Mechanical Engineer We provide and fully support total IT solutions. Customers can fulfill all of their computing and network needs with CTD’s full line of rugged and semi-rugged computers, network equipment, and peripherals. Using CTD’s technical services, customers can build and implement total solutions that meet their exact needs. CTD’s rugged and semi-rugged computer products include a full line of handheld, laptop, tablet, and palm-top computers; networking products include servers, storage devices, and wireless networking components; and edge devices include displays, workstations, printers, and faxes. CTD’s technical services offerings include systems integration; wireless network design and integration; and worldwide end-to-end life cycle support. Our customers include all branches of the U.S. Military; public-safety organizations; and commercial field services in the insurance; communication, utilities, transportation, and telecommunications industries worldwide. CTD has approximately 900 employees at facilities in the United States, Canada, Europe, and Asia. The successful candidate will support all technical aspects of a large defense program and understand its development processes and system engineering practices. Designs and analyzes mechanical systems, and equipment. Conducts feasibility studies and tests new and modified designs. Prepares detailed design, design testing and prototype fabrication. Also includes activities involved in fabrication, operation, application, installation, and repair of mechanical products and systems. Researches and analyzes data, such as customer design proposals, specifications, and manuals to determine feasibility of design or application. Follows direction and makes a contribution to the team. Begins to understand other commitments and interdependencies. Moves from sub-task optimization to project optimization. Promotes process/policy compliance. Supports continuous improvement initiatives. Generally works within an identified work group. Day to day direction usually from task lead or project leader. Listens to and acts on mentor advice. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. BS Degree in mechanical engineering or equivalent Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen. Applicant must be able to pass an extended background investigation (EBI) for this position. Company Name: General Dynamics C4 Systems Apply for this Position
07/23/2008 Electrical/Mechanical Assembler Assembles electronic components, subassemblies, products, or systems per J-Std and IPC-610 Class 3 Standards by performing the following duties with supervision. Essential Duties and Responsibilities: 1. Reads assembly documentation. 2. Receives verbal instructions. 3. Receives written instructions. 4. Identifies hardware. 5. Examines parts. 6. Aligns parts. 7. Solders parts. 8. Utilizes hand tools. 9. Utilizes equipment. 10. Routes and attaches wires and connectors. 11. Attaches hardware. 12. Seals assemblies. 13. Winds coils. 14. Reflow boards to carriers. 15. Replaces defective components and wiring. 16. Cleans assemblies. 17. Completes paperwork. 18. Uses computer and ERP software. 19. Follows ESD procedures. 20. Follows Lean Manufacturing guidelines. 21. Maintains regular and predictable attendance.High school diploma or general education degree (GED); or one to three months experience and/or training; or equivalent combination of education and experience. Is able to obtain IPC-A-610 Certification, J-STD Certification and ESD Certification in the 90-Day introductory period. Company Name: General Dynamics C4 Systems Apply for this Position
07/17/2008 Mechanical Engineer IDSI-GD is seeking an experienced mechanical engineer with hands-on experience and product implementation for electronic packaging applications. The right candidate must be able to work closely with lead electrical engineers to accommodate circuit design and mechanical requirements. Candidate will be responsible for proper RF shields, cabling and chassis designs. We are seeking extensive experience in structural analysis and thermal simulation tools. The candidate should possess the ability to perform cost analysis, mechanical BOM generation, CFD analysis, FMEA, tolerance analysis, and implementation of mechanical test plans. The candidate should possess hands-on experience in the use of Pro-E or Autocad software tools, and IcePack or Flowtherm software tools. The candidate should have a BS in Mechanical Engineering with relevant industry experience of 5-10 years. Should be a team player and possess great communications skills. Applicant must be capable of obtaining a US Security Clearance. Applicant must be a US Citizen... Company Name: General Dynamics C4 Systems Apply for this Position
07/08/2008 Mechanical Engineer Sr. GDC4S is seeking a Mechanical Engineer with 8+ years of demonstrated results. Responsible for mechanical analysis and design activities for tactical communication products and systems. Tasks include generating 3-D models, performing the electronics packaging, conducting structural analysis, thermal analysis/test and supporting system integration/test. Candidate will be responsible for meeting program milestones and interfacing with other engineering disciplines, program management and provide technical support as required. Candidate must be able to support production of current products by resolving assembly issues with vendors or on the production floor, working with design engineers to resolve technical issues and writing the appropriate change notices (CN’s). Candidate will be required to present/support design reviews. Candidate will solve technological problems and seek solutions that benefit team objectives. Demonstrates good judgment when taking calculated risks individually or for the team. Candidate must have good trouble shooting skills and the ability to work in a team environment. Solid interpersonal, oral and written communications skills are required. Knowledge of SDRC IDEA's 3D CAD Modeling software or similar CAD software. Must have a BS Degree in Mechanical Engineering, as well as, 8 + years demonstrated mastery of practical engineering applications. Designs and analyzes mechanical systems and equipment. Conducts feasibility studies and tests new and modified designs. Prepares detailed design, design testing and supports prototype fabrication. Also includes activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and systems. Researches and analyzes data, such as customer design proposals, specifications, and manuals to determine feasibility of design or application. Candidates must be willing to travel in support of business needs. A current DoD security clearance will be considered a plus. Applicant must be a US Citizen. Applicant must be capable of obtaining a US Security Clearance. Must be able to travel 20% of the time... Company Name: General Dynamics C4 Systems Apply for this Position
05/08/2008 Mechanical Packaging Engineer, Sr. Staff Mechanical Packaging Engineer Responsibilities Include: • Responsible for mechanical packaging design of land based and mobile electronic equipment that meet specified environmental requirements for military applications. • Responsible to produce production level fabrication implementations, interface with and transition design to production, perform environmental test, and perform tolerance analysis. • Must be capable of supporting multiple programs/and evolving requirements. Will interface with vendors and present design reviews. • Perform mechanical packaging design/development of land based, airborne electronic equipment that meets MIL specified environmental requirements. • Develop concepts in support of packaging trades, transition design to production level fabrication drawings and interface with internal Operations team as well as external suppliers. • Perform environmental testing as well as be able to support multiple programs with changing requirements. Required skills: • 5 years of experience in packaging of optical and high frequency digital circuit card assemblies in RF or microwave type enclosures with low thermal impedance to the electronic components and control of RF emanations desired. • Experience with packaging design that meets MIL-STD-461 RFI and military environmental requirements or high reliability commercial applications desired. • 5 years of experience in equipment design for Tactical Army harsh environmental applications or Navy/Air Force desired in VITA 48 3U/6U format or similar size standalone enclosure. • Experience with 2D and 3D ME design and modeling tools required. • Working Experience using UGC NX I-DEAS design and NX Team Center Engineering tools desired. • Thermal, Tolerance and environmental analysis of card assemblies and chassis. • BS in Mechanical (Masters degree preferred) • Active US Security Clearance... Company Name: Formalized Design, Inc Apply for this Position
04/04/2008 Sr Mechanical Engineer - Tactical Systems Experienced Mechanical Engineer to lead product design activities in the growing business areas of C2, C4ISR, and soldier systems. Responsible for mechanical design and packaging of tactical military communications and electronic equipment with significant effort associated with integrating and ruggedizing COTS hardware for vehicle/trailer/warfighter-body worn applications in military environments. Will be expected to define or modify existing mechanical architectures and detailed designs using sound mechanical engineering principles. Responsible for mechanical design analysis (including thermal, dynamic and structural), testing, and the hardware configuration of equipment under development. Will work as part of the concurrent engineering development team and provide direction to mechanical designers, printed wiring board designers, configuration and data management professionals, and production/operations engineering staff. Will also require interaction with non-engineering disciplines such as material, QA, manufacturing and others. Candidate must be self-directed and able to exercise initiative and sound judgment. Tasking may also support the pursuit of new business through development of technical briefings, system design concepts, and technical proposals. Some travel may be required. Applicant must be capable of obtaining a US Security Clearance and must be a US Citizen. Duties and Tasks also include: Accepts and solves the most difficult technical problems in mechanical engineering. Designs and analyzes mechanical systems, and equipment. Conducts feasibility studies and tests new and modified designs. Prepares detailed design, design testing and prototype fabrication. Also includes activities involved in fabrication, operation, application, installation, and repair of mechanical or electromechanical products and systems. Researches and analyzes data, such as customer design proposal, specifications, and manuals to determine feasibility of design or application. Continues to expand knowledge in domain of expertise. Displays a depth of knowledge across multiple technical areas. Mentors less experienced engineers Participates in development of technical strategies and teaming strategies on multiple projects. Leads medium sized technical proposals and contributes to large proposals. Leads large sized continuous process improvement efforts. Contact within the division including all of engineering, program management and occasionally with business unit management. Effectively bridges functional boundaries through listening to and comprehending concerns of both technical and management communities. BS Degree in Mechanical Engineering with first hand experience using Military Specs and Standards. A minimum of 9 years of demonstrated results, or equivalent experience is required. Advanced Degree recommended. Requires related experience in the design and development of military electronic systems and components. Familiarization with military specifications. CAD experience and familiarization with Parametric Technologies suite of design tools (Wildfire/Pro-Engineer/Pro Mechanica) required. Knowledge of geometric dimension and tolerancing using ANSI Y-14.5 as applied to development of documentation and Technical Data Packages in accordance with MIL-T-31000. Knowledge of injection molded plastic designs and their design for use in extreme climatic environments qualified IAW Mil-STD-810 test methods and techniques. Requires good oral and written communication skills, and interpersonal skills to support interaction with customer representatives, team members (including subcontractors), and internal management. Software knowledge/skills should include use of Microsoft Office products (Word, Powerpoint, Excel). Previous experience with Unigraphics Configuration Management tools (e.g. TeamCenter) a plus. Active/current DOD Security Clearance is highly desired. Must be capable of obtaining a DOD Security Clearance. Must be able to travel 20% of the time. Applicant must be capable of obtaining a US Security Clearance. Company Name: General Dynamics C4 Systems Apply for this Position
03/28/2008 Electrical/Mechanical Assembler Assembles electronic components, subassemblies, products, or systems per J-Std and IPC-610 Class 3 Standards by performing the following duties with supervision. Essential Duties and Responsibilities: 1. Reads assembly documentation. 2. Receives verbal instructions. 3. Receives written instructions. 4. Identifies hardware. 5. Examines parts. 6. Aligns parts. 7. Solders parts. 8. Utilizes hand tools. 9. Utilizes equipment. 10. Routes and attaches wires and connectors. 11. Attaches hardware. 12. Seals assemblies. 13. Winds coils. 14. Reflow boards to carriers. 15. Replaces defective components and wiring. 16. Cleans assemblies. 17. Completes paperwork. 18. Uses computer and ERP software. 19. Follows ESD procedures. 20. Follows Lean Manufacturing guidelines. 21. Maintains regular and predictable attendance.High school diploma or general education degree (GED); or one to three months experience and/or training; or equivalent combination of education and experience. Is able to obtain IPC-A-610 Certification, J-STD Certification and ESD Certification in the 90-Day introductory period. Company Name: General Dynamics C4 Systems Apply for this Position
12/05/2007 Sr. Mechanical Engineer Senior level Mechanical Packaging Designer. Mechanical Packaging – The ability to define mechanical structures to comply with assigned specifications. Designs RF products by solving all interrelationship problems of circuitry, connectors, signal transmission, housing, and covers to meet electrical, mechanical, and environmental requirements. A proficient understanding of drafting and design practices (ASME Y.14.100m), and a thorough understanding of Geometric Dimensioning & Tolerancing (ANSI Y.14.5) necessary for individual part configuration (Form Fit & Function) and attachment (Assembly). Demonstrate ability to structure and plan a complex assembly with sub-assemblies. Using verbal skills, 3 Dimensional / Isometric hand sketches to show the relation of one assembly to another, and relation of various assemblies to whole structure or project. A good understanding of materials, finish selection, and compatibilities, relative to mechanical structures. A good understanding of machine shop processes and capabilities. A basic understanding of Printed Wiring Board construction methods. Experience in Packaging RF microwave assemblies and sub-assemblies. AutoCAD 2004 or higher experience required, AutoCAD Inventor 10 or higher experience desired. Company Name: OSS Apply for this Position
11/21/2007 Mechanical Engineer SNC is looking for energetic and innovative mechanical structural engineers to support our expanding efforts in aircraft systems integration. BS in mechanical engineering. Degree in related field with aerospace background acceptable. Must have at least 5 years of experience in an aviation related field. Experience in 3-D CAD tools (SOLID WORKS prefered), Computational Fluid Dynamics (CFD), finite element analysis (COSMOS WORKS or NASTRAN prefered), propulsion systems, and composites highly desirable. Must be able to work in a highly collaborative, fast paced environment which emphasizes rapid prototyping and fielding of capabilities. Must be able to attain a security clearance. Position provides structural mechanical engineering support for C-130 and HH-60 aircraft integration programs. Company Name: Sierra Nevada Corporation Apply for this Position
11/18/2007 SENIOR MECHANICAL ENGINEER Client is seeking a seasoned senior mechanical engineer to perform electro-mechanical design, packaging and analysis of antennas systems. This will include hardware and components for land, and airborne applications to support the mechanical design of antenna systems, hardware and components. You will be involved in proposal preparation efforts, design presentations and review efforts. Other responsibilities and requirements will be to ensure Client is meeting all program requirements for our current ground based SATCOM and data link antenna terminals and broadband COM antennas. The Requirements A BSME (MSME) preferred plus ten years experience in mechanical engineering involved in the design of RF/microwave, electronics and optical electro-mechanical components and assemblies for the commercial, military, and science fields. Must have the ability to organize, plan, implement and evaluate engineering activities with a thorough knowledge of various metals to include aluminum, stainless and copper and the various brazing and machining processes for each. Must have excellent computer skills and knowledge of Microsoft Windows, Word, Excel, PowerPoint, AutoCAD, and FEA. Prior supervisory experience is preferred. Company Name: The Couture Group, Inc. Apply for this Position
09/18/2007 MP&P Engineer Level 2 Ares I Crew Launch Vehicle (CLV) for NASAs Constellation Program. This requisition is contingent upon the award of the Production contract for the Ares I Upper Stage (US). The Ares I rocket uses a solid rocket booster for the First Stage and a liquid oxygen/hydrogen J-2X engine for the US. This position is for a Materials, Processes and Physics (MP&P) engineer providing subject matter expertise to NASAs Design Team (NDT) and Systems Engineering & Integration (SE&I) Analytical Integration Team (AIT). Responsibilities include contributing in the developing an M&P control plan for the US Subsystems that addresses materials flammability, corrosion control, mechanical parts control and compatibility with fluids and the environment. Review and disposition of design drawings based on the M&P control plan. Develop and review Materials Usage Agreements (MUAs) with the NASA Design Team (NDT). Populate the MAPTIS-II repository for all subsystem Materials Identification and Usage Lists (MIULs) reflecting the as-built design configuration. Contribute in the implement a contamination control plan appropriate for fluid systems, mechanisms and general hardware surfaces. Contribute in the development and implementation of a Non-Destructive Evaluation (NDE) plan in coordination with the NDT. REQUIRED: US Citizenship; this position requires the ability to obtain access to the NASA/MSFC facility. Prior experience in mechanical materials, processes & physics (MP&P) engineering. The candidate must also demonstrate the following competencies. MATERIALS ENGR PRINCIPLES: Apply knowledge of materials engineering and scientific principles to develop, design, analyze, test, and validate solutions for complex systems and sub-systems. MATERIAL PROCESSING: Knowledge of material processing for metals (e.g., welding, forging, heat treat, machining, forming), sealants and finishes processing (e.g., plating, painting, surface preparation, fay surface sealing, fillet sealing). CORROSION PRINCIPLES: Knowledge of corrosion principles (e.g., crevice, stress, dissimilar metals). METALLIC MATERIALS: Knowledge of metallic materials (e.g., aluminum, titanium, steel). NON-DESTRUCTIVE EVAL PROCESSES: Knowledge of non-destructive evaluation processes (e.g., ultrasonic testing, radiography, eddy current testing, penetrant inspection). DESIRED: Experience on human spaceflight development programs. Knowledge of NASA policies, procedures and processes. Company Name: The Boeing Company Apply for this Position
09/16/2007 Mechanical Engineer (RF Components) The mechanical engineer is primarily responsible of the mechanical design of RF components, particularly filter, duplexer and integrated system housings and subcomponents. Based on his (her) experience, the mechanical engineer can be responsible as a technology gate-keeper, for a product running in production or for tools or procedures in R&D. The mechanical engineer is responsible for the following: • Carries out the assigned project tasks according to the agreed technical, quality and economical goals, • Develops knowledge of suppliers actual process capabilities. • Advises RF and mechanical designers to design within these capabilities, • Develops specifications, layouts, well-defined sketches, models or verbal instructions sufficient for detailing housings and components, • Ensures that the work observes the current standards for documentation, drawings, parts lists, numbering systems, especially regarding versions and traceability, • Works in close global coordination with other mechanical engineers of the same Business Units in other locations, • Directs mechanical designers or draftsmen to make corrections, revisions, and changes to layouts as decided by the development team, • Executes tasks and communicate issues in a timely manner, • Investigates new processes that could be beneficial to RFS or it’s customers, • Where required, assumes a lead role in mechanical testing and failure analysis, • Supports the RFS sales and marketing groups in maintaining and developing customers. • Works with the engineering and manufacturing teams to support design for manufacture and automation. Qualifications/ EXPERIENCE: • Ability to simultaneously manage multiple projects. • Good communications skills. • Good organizational skills. • Self-motivation to produce high quality work in a timely manner. • Hands on. • Team worker. • Experience in casting, injection molding, sheet metal work and machining is preferred. • EDUCATION: BSME or equivalent. Experience with computerized mechanical 3D CAD software. • Experience with modeling software (FEA, Airflow simulations,…). Company Name: The Couture Group, Inc Apply for this Position
08/30/2007 CADD Draftsman OakTree Enterprise Solutions is seeking a Draftsman with Computer Aided Drawing and Design (CADD) expertise. Microstation and/or 3D Modeling knowledge and experience are highly desirable. Ability to obtain US Government Security Clearance is required. Active security clearance is preferred Desired Qualifications: ·Associates degree in Engineering or related field with a minimum of 3 years experience using 3D modeling software or high school graduate with mechanical drafting courses and a minimum of five years drafting experience, one of which must be CADD related. ·Must demonstrate superior CADD skills ·Facilities experience is a plus ·BIM and GIS experience is a plus ·Intermediate to advanced knowledge of Microsoft Office applications (Word, Excel, PowerPoint, Access, Outlook, Visio, Publisher and Project) ·Demonstrated Experience may include: MicroStation, AutoCAD, CADD, CAD, CAD Designer, CAD Analyst, CAD Operator, Pro, Pro-E, Pro/E, ProE, Pro Engineer, Pro/Engineer, Pro-Engineer, Design, Design Engineer, Design Analyst, Designer, Product Design, New Product Development, Product Development, New Product Design, Drafting Company Name: OakTree Enterprise Solutions, Inc. Apply for this Position
06/15/2007 Product Realization Engineer The Product Realization Engineer (PRE) is responsible for the following duties in relation to RF/Microwave coaxial cables, engineered to customer specifications: Participate in all Quote Readiness Reviews Perform final spec review and ensure complete compliance Create test and inspection plans, configure manufacturing process and take corrective actions when needed Control all supplier requirements Oversee all production pilot runs Oversee qualification testing This individual should have a Bachelors Degree in Electrical or Mechanical Engineering with some experience or classwork in RF/Microwave. Through Values, Mission, and Vision, Micro-Coax recognizes initiative and accomplishment and values a team-oriented environment. Exceeding +22% in 2006, Micro-Coax continues to grow as an industry leader in Airframe, Military, Space/Satellite, and Test and Measurement. Micro-Coax offers a complete package including competitive salary, benefits, 401K, profit sharing, generous vacations and holidays, and summer work hours. Company Name: Micro-Coax Apply for this Position
04/06/2007 Senior Electromechanical Switch Engineer Our client is in search of qualified engineering personnel. The are currently seeking an individual with a minimum of 3 years + experience in designing, testing, and facilitating all aspects of the Electromechanical Switch department. Experience with production management is a plus. They offer a competitive salary and benefits package. Relocation packages are available About: We strive for low material and production cost in order to offer the best pricing and highest quality possible. Our purchasing power allows us to buy in volume. Our long-term vendor relationships allow us to lock-in the lowest cost. Our 10,000 sq. ft. manufacturing plant enables us to store material in bulk and maintain a large volume of “stock” inventory. Our design team and staff focus on each customer’s individual needs. The company is able to complete engineering and manufacturing tasks in a matter of days, offering hundreds of custom designed products each year. Production and inventory are controlled using a computerized system. This system utilizes an MCLI database which indexes all model numbers and is updated regularly. The company maintains a large inventory of material and utilizes all of its own in-house manufacturing/testing equipment, we have total control of every step in the production process. The entire staff is willing to go the extra mile to satisfy the customers’ needs. Quotations for standard catalog items are typically provided within 24 hours. It is possible to ship in-stock items the very same day they are ordered! They are committed to providing excellent service to thier customers throughout the world. They take pride in our products and our high integrity is demonstrated in every component carrying thier label. Company Name: Defense Talent Network Exe Search Apply for this Position
03/17/2007 Military Vehicle Systems Engineer Our Client is a well-established Engineering & Design Services Provider, with extensive experience in the Automotive sector. Significant activities are underway which provide new growth in the area of wheeled military vehicles. The successful candidate(s) must be US Citizens, a minimum BS degree in Engineering, and have experience in the engineering and integration of the systems associated with armored wheeled military vehicles. Recent military service, security classifications and hands-on field exposure will enhance the opportunities which exist for the candidate and our Client Company Name: Dusek Network Inc. Apply for this Position
01/10/2007 Aircraft Mechanical Systems Engineer The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the world's leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. The Mechanical Systems Engineer provides systems engineering support on systems, major system elements, and/or interfacing systems. The engineer contributes to system architecture and design, assists in systems definition, trade-off and design activity. She/he reviews, evaluates, and analyzes design interfaces. The engineer prepares, reviews, and evaluates interface documentation, specifications, test plans and procedures. He/she assists in definition, analysis and allocation of requirements. He/she supports system test programs and analyses systems testing. The mechanical systems engineer conducts analysis of system requirements and components and supports system audits conducted to ensure intended system functionality and performance is achieved. Company Name: Dusek Network Inc. Apply for this Position
11/2/2006 Mechanical Engineer We are a hands-on technical company comprised of electrical and mechanical engineers and technicians, computer scientists, and professional support personnel. Although our expertise is in engineering services, as a full-service contractor we provide a wide range of project management and administrative services as well. We have openings for Mechanical Engineers to support the design and fabrication of our flight simulator/trainer projects. A BS in Mechanical Engineering and experience with Pro-Engineer or Solid Works is required. Familiarity with sheet metal fabrication and aircraft hardware is a plus. Strong organizational, writing, and communication skills are required. Should be familiar with ASME Y14.100M drawing standards and ISO 9000 standards. Company Name: J.F. Taylor, Inc. Apply for this Position
10/28/2006 Sr. Mechanical/Facilities Engineer Outstanding opportunity for a motivated candidate to expand our growing Environmental and Facilities Division in Pennsylvania. Projects include: Airports, Water/Wastewater Facilities, Central Utility Plants, Education, Healthcare and Transportation Facilities. Position offers the candidate the opportunity to expand their technical and professional capabilities. Job Requirements: Must possess BS in Mechanical Engineering, P.E., 10{PLS} years of related experience and be knowledgeable in the design of HVAC, Central Utility Plants, Pumping, Instrumentation and Controls and Plumbing systems. Capable of organizing and managing people and projects. Requires statewide marketing proposal preparation, managment, client relations and developing strategic partnerships. Company Name: The Couture Group, Inc. Apply for this Position
9/13/2006 Sr. Mechanical Engineer Leads the mechanical design and integration of complex mechanical or electromechanical systems into military or DoD aircraft. Provide highly technical expertise and guidance in solving complex engineering problems. Apply military specifications and standards to equipment designs and/or system installations. Conduct mechanical hardware design, development, integration/implementation and analysis in all phases of design and development and production. Incorporate stress/structural, weight and balance, and system safety into system design. Develop and standards and guidelines for tasks to be performed. Utilize CAD software such as Solid Works in development of mechanical design solutions. Utilize various MS Office software tools.. Must be able to obtain SECRET level security clearance. EXPERIENCE: Six (6) to twelve (12) years experience in the design, development, and integration of complex mechanical and electromechanical systems and subsystems. Must be proficient in AutoCAD/SolidWorks/Catia. DoD experience preferred. Company Name: EOIRCareers Apply for this Position
8/19/2006 Sr. Mechanical Engineer Leads the mechanical design and integration of complex mechanical or electromechanical systems into military or DoD aircraft. Provide highly technical expertise and guidance in solving complex engineering problems. Apply military specifications and standards to equipment designs and/or system installations. Conduct mechanical hardware design, development, integration/implementation and analysis in all phases of design and development and production. Incorporate stress/structural, weight and balance, and system safety into system design. Develop and standards and guidelines for tasks to be performed. Utilize CAD software such as Solid Works in development of mechanical design solutions. Utilize various MS Office software tools.. Must be able to obtain SECRET level security clearance. EXPERIENCE: Six (6) to twelve (12) years experience in the design, development, and integration of complex mechanical and electromechanical systems and subsystems. Must be proficient in AutoCAD/SolidWorks/Catia. DoD experience preferred. Company Name: EOIRCareers Apply for this Position
8/19/2006 Sr Mechanical Engineer I The successful applicant will provide support to the Mechanical Engineering team. This will include the following tasks: mechanical design, mechanical modeling, mechanical data documentation, and project engineering support. The project engineering support piece will involve interfacing with other engineers of other disciplines to reach system design solutions. In addition, this position will require some production oversight. Required Skills: -8+ years experience mechanical design. -Experience designing with Pro/Engineer Wildfire 2.0 and AutoCAD. -Experience with component and assembly modeling and drawings creation. Desired Skills: -Experience in the packaging of electronic systems -A thorough knowledge of military shelters -Proven experience in project engineering -Experience with radar systems design Company Name: Raytheon Apply for this Position
8/5/2006 Sr. Mechanical/Facilities Engineer Projects include: Airports, Water/Wastewater Facilities, Central Utility Plants, Education, Healthcare and Transportation Facilities. Position offers the candidate the opportunity to expand their technical and professional capabilities. Company Name: The Couture Group, Inc. Apply for this Position
8/5/2006 CATIA Designer Performs research, design, and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. Company Name: BAE Systems Apply for this Position
8/1/2006 Principal Mechanical Engineer This position is for an electronics packaging engineer with skills applicable to advanced multi-layer and high speed digital interconnects and electronics module mechanical design in support of advanced miniaturized RF system and antenna development. Work includes design and analysis of packaging for electronic devices and assemblies ranging from bare die to board-level and system-level assemblies in support of leading edge avionics systems. The applicant must have experience with mechanical assembly design, RF component packaging, advanced interconnect substrate technologies, materials/metallurgy, and microelectronics fabrication/assembly. Experience with design/analysis simulation tools, such as AutoCad, ANSYS, etc., is required. Experience with LTCC technologies and system level module integration is highly desirable Company Name: Rockwell Collins Apply for this Position
7/28/2006 Principal Hardware Design Engineer (Mechanical) This senior level Mechanical Engineer will support on-going programs, proposals, and new business capture. The position will be responsible for the mechanical design and packaging of complex electronic subsystems used in a military environment. Activities will consist of concept development, detail mechanical design, design documentation, structural and thermal stress analysis of mechanical and electronic assemblies, design reviews and validation, and release to manufacturing. Knowledge of 3D solid modeling software, analysis software, product data management software, MIL-SPECs and electronic packaging is required. Company Name: BAE Systems Apply for this Position
7/27/2006 Pyrotechnic Actuation Design Engineer This position is for a senior level mechanical design engineer who will be responsible for the design development of various pyrotechnically actuated ejection and deployment mechanisms to be used within various missile products. Development includes requirements definition and allocation, design concept definition, performance simulations, detailed design and design verification testing. Company Name: NewTech Executive Search Apply for this Position
7/27/2006 Mechanical Engineer Defense and Space has an immediate opening for a Mechanical Engineer who will be responsible for all mechanical design aspects of RF/Mircowave hybrid electronic component and subsystems packaging including: thermal and structural analysis, design development and prototyping, design/testing of manufacturing support fixtures, metal fab support, hardware integration and production support. Must have BSME and 3 years minimum experience in electronic packaging or circuit board design. Good knowledge of AutoCAD, 2D/3D modeling package, preferably SolidWorks. Experience in RF electronic packaging is preferred. Due to DOD requirements, must be a U.S. citizen and must be able to obtain/maintain a secret security clearance. Company Name: NewTech Executive Search Apply for this Position
7/27/2006 Mechanical Engineer Propulsion engineer in the Unmanned Air Vehicle business area. Reports to the principle air vehicle development engineer. Lead engineer responsible for the propulsion systems on 800 pound and less gross weight air craft. Responsible for the selection, installation, integration, test and analysis of air craft engines from fractional horsepower up to 75 horsepower. Responsible for technical interface with engine suppliers to establish root cause of engine design problems and to define upgrade requirements and solutions. Skills & Qualifications: Bachelors degree in mechanical engineering or related discipline Company Name: NewTech Executive Search Apply for this Position
7/25/2006 Sr. Principal Mechanical Engineer * Electronics packaging for military environments * 3D solid modeling CAD software * Thermal Analysis * Stress Analysis * ANSI Y.14 documentation practices * EVMS-cost account management experience * Manufacturing Processes * Environmental testing * Random vibration * Materials knowledge * BSME and a minimum of 12 years work experience * Or, Master's and a minimum of 10 years experience Company Name: BAE Systems Apply for this Position
7/23/2006 Utilites Engineer Seeking engineers with a minimum of a BS in mechanical, electrical, or systems engineering, expertise in engineering fundamentals, and operational experience with integrated electrical and mechanical systems. Successful applicants will become principal investigators of ongoing projects. Requirements: A current Top Secret security clearance with recent SSBI is required. Advanced degrees, specialized training and qualifications, and experience with facility and system characterization are a plus. To apply, please send resume and cover letter with salary requirements. (M/F/D/V) Company Name: UTD Incorporated Apply for this Position
7/23/2006 ENGINEER, MECHANICAL PACKAGING Mechanical Engineering Bachelors or Masters Degree graduate with 3-5 years of experience. Knowledge of mechanical engineering design principles and fabrication processes for high density electronic equipment is required. Experience using solids modeling programs such as UG IDEAS is a plus. Understanding of thermal and structural/vibration design, analysis, and test principles is required. Experience in using FEM analysis programs such as ANSYS and IDEAS is also a plus. * B.S. DEGREE IN MECHANICAL ENGINEERING OR RELATED DISCIPLINE * KNOWLEDGE OF THERMAL AND STRUCTURAL/VIBRATION DESIGN, ANALYSIS, AND TEST PRINCIPLES * KNOWLEDGE OF MECHANICAL ENG DESIGN PRINCIPLES AND FABRICATION PROCESSES FOR HIGH DENSITY ELECTRONIC EQUIPMENT. Company Name: BAE Systems Apply for this Position
7/16/2006 Aircraft Mechanical Systems Designer The company develops, designs, FAA certifies and manufactures business, government and military jet aircraft. The company’s goal is to become the worlds leading aircraft producer by creating a family of cost-efficient, high- performance, high-quality, superior-technology business jet aircraft for the corporate, government and military sectors of world aviation. The Design/Drafter must be able to read, interpret, and revise engineering drawings on Unigraphics CAD workstations. The candidate must have experience in business jet and/or commercial jet aircraft structural design. The design responsibilities include, but are not limited to, aircraft structures to include aircraft primary and secondary structure design such as: Engine nacelle, Landing Gear, Fuselage, and Flight Controls. The candidate must be able to work in a teamwork environment with other disciplines (Systems, Fuels, Flight Controls, Avionics/Electrical, etc.), and technical analysis engineers (Stress, Damage Tolerance, etc.). The design/drafter must be able to advise group leader as to accurate drawing schedule completion and additional design resource requirements. Finally, the candidate must be self-starter and able to utilize limited resources. Company Name: Dusek Network Inc. Apply for this Position
7/16/2006 Mechanical Designer Minimum seven years experience in Mechanical design layout, using 3-D solid modeling tool, for form, fit and function of electronic packaging hardware. Will interface with IPT members and procurement vendors. Will also develop design documentation, layouts, BOMs using PDM and specifications for engineering projects including new and revised products. Will prepare assemblies, BOMs and detailed drawing packages for various company products, which assure ease of fabrication and assembly. Performs dimensional layouts and tolerance studies. Responsible for continuous improvement of assigned processes and assures applications of company approved total quality management techniques, throughout assigned areas. * High School Diploma and 7 years experience in military mech electronics packaging design * Requires minimum of 6 years of lower level directly related experience. * 2 years most recent experience with 3-D solid model techniques. * Extensive knowledge of mil design standards, manufacturing standard practices, drafting practices per ASME Y14.5M * Strong interpersonal skills, work well in a team environment * 1000 hrs recognized formal drafting training course Company Name: BAE Systems Apply for this Position
7/15/2006 Aircraft Design Engineer III (Mechanical) Aircraft Design Engineer to apply knowledge of and experience with engineering principles and techniques to develop moderately complex aircraft modification specifications and procedures, develop and analyze aircraft modification designs, and evaluate associated technical reports. Conduct detailed analysis and complete detailed designs using 3D and 2D Computer Aided Design tools. Generates 3D solid models and 2D drawings. Performs preliminary design analysis for structural integrity. Conducts engineering research concerned with aircraft modification design, manufacture and test of components, equipment and systems, including application of equipment to new uses. Ability to complete assignments with infrequent supervision. * Bachelors Degree in Mechanical or Aerospace Engineering or Equivalent * 4 years experience with aircraft design and modifications * U.S. Citizenship. Applicant selected will be subject to a government security investigation and must meet the eligibility requirements for access to classified information * SolidWorks and/or Catia V5 experience * Proficient in MS Office applications Company Name: BAE Systems Apply for this Position
7/15/2006 Aircraft Design Engineer IV (Mechanical) Aircraft Design Engineer to apply knowledge of and experience to develop complex aircraft structural and/or mechanical designs. Will provide engineering design and analyses to support multiple commercial and military aircraft modifications. May be responsible for leading an Integrated Product Development Team (IPDT)and supervise lower level engineers. Generates 3D Computer Aided Designs and 2D drawings to support fabrication and aircraft installation requirements. May be responsible for IPDT cost, schedule, and technical performance. May be required to travel and/or work extended hours. * Bachelors Degree in Mechanical or Aerospace or Equivalent * 6 years experience with aircraft design and modifications * U.S. Citizenship. Applicant selected will be subject to a government security investigation and must meet the eligibility requirements for access to classified information * Proficient in SolidWorks and/or CATIA V * Proficient in MS Office applications Company Name: BAE Systems Apply for this Position
7/14/2006 SR. Mechanical Design Engineer Requires a minimum of 15 years experience in military aircraft structural design; the ability to take design concept from requirements to initial layout to assembly drawings and detail design documentation; an understanding of ANSI tolerancing and Mil Spec Drawing as well as aircraft materials (metallic and composite); and proficiency in 3D CAD Catia V5 desired. Desired Education: Bachelors Degree -- Engineering Relevant Experience: Mechanical Engineering Computer Assisted Design Structural Engineering Company Name: BAE Systems Apply for this Position
7/14/2006 Mechanical Engineer Perform cost account management to include estimating, executing, controlling and reporting. Must be able to utilize PCCS (Project Cost Control System) in developing and managing budgets. BS in Engineering or equivalent degree or a Professional Engineer license plus 2 years Design Engineer or related engineering experience. No experience required with MS degree. Working knowledge of overall chassis systems such as engine./transmission, suspension, cooling, fuel systems & control interface. Pro-E Wildfire Company Name: TAC Worldwide Companies Apply for this Position
7/14/2006 Sr. Mechanical Designer The candidate must have experience in mechanical design of structural components and rotating power transmission machinery. Experience in automotive propulsion systems or in aerospace power transmission systems. The candidate should be well versed in design and development of military combat hardware. Responsible for detail design of the automotive braking system. Must have Pro-E exp. DoD exp. Company Name: TAC Worldwide Companies Apply for this Position
7/14/2006 MTS MECHANICAL II MTS MECHANICAL II 8066011 2005-152 10 MO –Santa Clara, CA Will be responsible for the mechanical design and development of the Traction Drive System for the Future Combat Systems, manned Ground Vehicle, Common Propulsion System. GEAR BOXES, TRANSMISSIONS, FLAP DRIVES, LANDING GEAR, GEARED ACTUATORS Company Name: TAC Worldwide Companies Apply for this Position
7/29/2006 Senior Mechanical Engr – Microwave Systems The Senior Mechanical Engineer should have 10+ years of experience in an industrial/manufacturing environment with a track record of progressively increasing responsibilities. The candidate must be able to lead the development of mechanical products assuming full responsibility for execution of activities including costing/scheduling, design, analysis, and engineering documentation. The candidate should demonstrate leadership capabilities. Extensive experience with design and selection of machine elements used in precision drive mechanisms including bearings, gearboxes, position sensors, and servomotors is required. The candidate must also be familiar with fabrication and integration of positioning systems and be able to optimize designs for manufacturing. A background in machine tool design would be highly desirable. Company Name: Dusek Network Inc Apply for this Position
5/16/2006 Sr. Mechanical/Facilities Engineer Projects include: Airports, Water/Wastewater Facilities, Central Utility Plants, Education, Healthcare and Transportation Facilities. Position offers the candidate the opportunity to expand their technical and professional capabilities. Company Name: The Couture Group, Inc. Apply for this Position
5/31/2006 Senior Mechanical Engr – Microwave Systems The Senior Mechanical Engineer should have 10+ years of experience in an industrial/manufacturing environment with a track record of progressively increasing responsibilities. The candidate must be able to lead the development of mechanical products assuming full responsibility for execution of activities including costing/scheduling, design, analysis, and engineering documentation. The candidate should demonstrate leadership capabilities. Extensive experience with design and selection of machine elements used in precision drive mechanisms including bearings, gearboxes, position sensors, and servomotors is required. The candidate must also be familiar with fabrication and integration of positioning systems and be able to optimize designs for manufacturing. A background in machine tool design would be highly desirable. Company Name: Dusek Network Inc Apply for this Position
5/31/2006 Associate Mechanical Engineer An Associate Mechanical Engineer carries out mechanical engineering assignments of moderate complexity related to the validation and verification of marine vessels, land vehicles, and subsystem concepts developed by the IR&D Concept design group with considerable discretion as to the details of how the solutuions are evaluated. Company Name: EOIRCareers Apply for this Position
5/23/2006 Mechanical Designer or Drafter (Pro-E) Large aerospace company looking to find 6 mechanical designers/drafters to work on project using ProE-wildfire. The position is a contract slated to last 3-4 months with the possibility to go permanent if candidates show exceptional work ethic and the knowledge of the product at hand. Candidates must posses excellent communication skills and be a team player. Company Name: EW Career Apply for this Position
5/23/2006 Mechanical Engineer We are looking for an FEA Analyst experienced with ANSYS software performing linear & non linear analysis who can also provide engineering design support as and when required. We expect this to be a 75% - 25% split between FEA work and design work with the emphasis on FEA. Company Name: EW Career Apply for this Position
/17/2006 Principal Engineer-Mechanical/Structural Provides competent, professional assistance as a Team member during contractual efforts requiring System/Equipment Installation, modification, refurbishment, electrical and mechanical testing, equipment modification, System Interface and final Customer Sell-Off. After receiving competent direction, employee is capable of independently investigating Unit problems, utilizing Schematics, diagrams, parts lists and test equipment of the trade, isolate the problem to the component level, and effect repairs. At the Unit repair and alignment level, employee is 100% capable to function independently. Employee must be thoroughly capable of independent action on at least one ITT Gilfillan product line. Employee must possess communications skills required for the preparation of written reports, including being capable of functioning at the professional level when required to attend conferences/meetings involving vocal interaction. Knowledge of electronics must be sufficient to independently master additional ITT Gilfillan Product Line skills during the practical hands -on opportunities made available through out the course of his employment. Company Name: EW Career Apply for this Position
4/27/2006 Principal Hardware Design Engineer (Mechanical) This senior level Mechanical Engineer will support on-going programs, proposals, and new business capture. The position will be responsible for the mechanical design and packaging of complex electronic subsystems used in a military environment. Activities will consist of concept development, detail mechanical design, design documentation, structural and thermal stress analysis of mechanical and electronic assemblies, design reviews and validation, and release to manufacturing. Knowledge of 3D solid modeling software, analysis software, product data management software, MIL-SPECs and electronic packaging is required. Company Name: BAE Systems Apply for this Position
5/13/2006 CATIA Designer Performs research, design, and development in such areas as mechanical, thermal, hydraulic, thermodynamic, or heat transfer for production, transmission, measurement, and use of energy. Applies research to the planning, design, development, and testing of mechanical and/or electromechanical systems, instruments, controls, engines, and/or machines. Company Name: BAE Systems Apply for this Position
5/11/2006 Sr. Principal Mechanical Engineer Located in Lansdale PA, this senior level Mechanical Engineer will support on-going programs, proposals, and new business capture. The position will be responsible for the mechanical design of complex electronic subsystems used in a military environment. Work will consist of concept development, detail mechanical design, design documentation, thermal and stress analysis, design reviews and validation, and release to manufacturing. Knowledge of 3D solid modeling software, analysis software, product data management software, MIL-SPECs, earned value, and electronic packaging is required. Company Name: BAE Systems Apply for this Position
5/9/2006 ENGINEER, MECHANICAL PACKAGING Mechanical Engineering Bachelors or Masters Degree graduate with 3-5 years of experience. Knowledge of mechanical engineering design principles and fabrication processes for high density electronic equipment is required. Experience using solids modeling programs such as UG IDEAS is a plus. Understanding of thermal and structural/vibration design, analysis, and test principles is required. Experience in using FEM analysis programs such as ANSYS and IDEAS is also a plus. Company Name: BAE Systems Apply for this Position
5/4/2006 Principal Mechanical Engineer This position is for an electronics packaging engineer with skills applicable to advanced multi-layer and high speed digital interconnects and electronics module mechanical design in support of advanced miniaturized RF system and antenna development. Work includes design and analysis of packaging for electronic devices and assemblies ranging from bare die to board-level and system-level assemblies in support of leading edge avionics systems. Company Name: Rockwell Collins Apply for this Position
<