|
|
 |
Wireless Jobs |
10/07/2008 Communication
& Networks Systems Engineer 4/5
The engineer requires experience with MANET and
knowledge of Network Centric Architecture concepts. The
candidate must be proficient with C, C++, HTML, Java,
and Linux and Windows operating systems as well as have
a working knowledge of Router/Switch Configuration and
IP networking. The engineer should be comfortable
working in both the lab and field environment with
frequent travel and extended field assignments. The
engineer must have a working knowledge of legacy and
emerging wireless communication technologies such as
software defined radios, the tactical internet, Joint
Tactical Radio (JTR) compliant waveforms, and commercial
wireless networks.
Education Requirements:
Level 2 - Degree and typical experience in engineering
classification: Bachelor's and 2 or more years'
experience or a Master's degree with experience.
Bachelor, Master or Doctorate of Science degree from an
accredited course of study, in engineering, computer
science, mathematics, physics or chemistry. ABET is the
preferred, although not required, accreditation
standard. Level 3 - Degree and typical experience in
engineering classification: Bachelor's and 5 or more
years' experience, Master's degree with 3 or more years'
experience or PhD degree with experience. Bachelor,
Master or Doctorate of Science degree from an accredited
course of study, in engineering, computer science,
mathematics, physics or chemistry. ABET is the
preferred, although not required, accreditation
standard.
Security Clearance Requirements:
Ability to Obtain Interim and/or Final Clearances (Post
Start) - US Citizenship Required..
Company Name: Boeing
Apply for this Position
|
10/02/2008 Engineering
Project Lead
Position for the System Development of Ground
Communications Projects for MUOS and other related
communications programs. This position requires a highly
motivated project leader/task leader to lead an
engineering team to design, develop, integrate and
install major ground elements for a large military
satellite communications system utilizing commercial
telecommunication technologies. The project leader/task
leader is responsible for the entire project life cycle
from project kick-off through system installation and
validation. Activities performed by the project/task
leader include defining the project schedule,
project/task planning of a concurrent engineering
development team, defining the workload of the team,
working with project management in acquiring resources,
managing the day-to-day activities in the implementation
of the project plan, Earned Value Management, present
team progress to program management and customers,
provide weekly and monthly status of the project and
lead/participate in the system integration/validation
phases of the development. The successful candidate will
be responsible for a challenging and innovative system
solution. Specific Knowledge BS in Engineering (EE, CE,
etc.) with 10 years minimum experience in Project
Management of wireless telecommunication, military
SATCOM, or software development projects. Good
leadership and project coordination skills is required
with the initiative and drive to lead a high performance
team to success. The project/task lead must be able to
make effective presentations to program management and
customers. Experience in the use of industry standard
project management tools is required (Earned Value
methods, Risk Analysis, Technical Performance Measures,
Metrics, etc.). Experience with the management of
subcontracts is highly desired. Experience with software
and systems engineering methodologies and processes for
product development is highly desired. Experience with
CMMI systems and software engineering processes such as
architecture development, requirement analysis and
product realization is required for the design and
deployment of this major military communications
systems. Skills in network protocols and network
security is highly desired. Experience with Rationale
software development platforms, DOORS requirements, and
Oracle products would be an advantage. Familiarity with
UNIX/LINUX, Client/Server Architectures, UML, Object
Oriented analysis design, and multi-threading as well as
database design is also desired. Must be able to travel
20% of the time. PMP and JACMEET Project Management
certification a plus.
Must be able to travel 20% of the time.
Company Name: General
Dynamics C4 Systems
Apply for this Position
|
09/24/08
Production Test Engineer
The Rescue 21 Production Test Engineer will be
responsible for the factory testing of all deliverables
associated with a major, nationwide communications
system. This position will be required to:
Conduct acceptance testing and troubleshooting of
complex systems, subsystems, and modules in an effective
efficient manner. Accurately document tests and
procedures.
Demonstrate good analytical capability and current
technical knowledge.
Interpret complex engineering drawings, diagrams and
schematics.
Generate appropriate testing metrics, analysis and
corrective action of defect trends.
Provide technical leadership, troubleshooting
guidance, technical support and day-to-day tasking for
production test technicians. Ensure all project
timelines and goals are met
Effectively interface with customer, sub-contractor
and engineering organizations.
Identify capital needs and provide estimates as
necessary. BS Degree in a technical field related to
test engineering +9 years of demonstrated results, or
equivalent experience. Advanced degree recommended.
Strong troubleshooting skills, understanding of
networking and RF principles, knowledge of test
measurement equipment, and strong technical writing
ability (test plans, procedures and reports) required.
Experience with the integration and test of military
communication systems a plus. Knowledge of interface
protocols and wireless networking strongly desired.
Applicant must be a US Citizen.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security
Clearance.
Company Name: General
Dynamics C4 Systems
Apply for this Position
|
07/19/2008
Systems
Engineer
As a member of the GDC4S WIN-T Network Operations (NETOPS)
Integrated Product Team (IPT), the individual will
perform systems design and development for WIN-T
State-of-the-Art Network Management System (NMS).
Candidate will perform all aspects of Systems
Engineering disciplines including: Requirements
Analysis, Use Cases and Data Flow Diagrams development
as well as defining system default data definition.
Responsibilities also involve interpreting and analyzing
WIN-T architectural requirements obtained/derived from
GDC4S customers and other vendor specifications;
participate in hardware and software design reviews
while interfacing with internal IR&D, subcontractors and
other engineering disciplines. The candidate will also
be required to provide systems engineering support to
other cross-functional product teams such as: Software
Engineering, Network Design, Information Assurance,
Modeling & Simulation, Test/Integration, Integrated
Logistics Support, and Training.
Successful candidates must have a systems engineering
expertise with demonstrable background in research
support and in-depth knowledge of COTS/GOTS network &
systems management applications. Individual will be
required to support all required WIN-T program
Preliminary Design Reviews (PDRs), Critical Design
Reviews (CDRs) and technical interchange meetings, as
well as maintain metrics on the progress of systems
development.
2+ years in the overall process of designing complex
military Network Management systems for tactical
communications or commercial wired/wireless
communications systems. Requires strong Army operational
experience, including C2 communications and objective
force structure. Experience with radio systems,
Policy-Based Networking (PBNM/DEN/LDAPv3), Web-based
Management (WBEM), SNMP v2c/v3, ASN.1, TL1, CIM, TMN
architecture, Information Assurance (Firewalls, IDS,
ACL, KMS/PKI). Working knowledge with Telelogic DOORS,
RationalRose and C4ISR architecture framework is
desirable. Good verbal/written communication and
customer facing skills is required.
Must be able to travel 20% of the time.
Applicant must be capable of obtaining a US Security
Clearance.
Company Name: General
Dynamics C4 Systems
Apply for this Position
|
10/29/2007 Senior
Defense Analyst - Communications
We have immediate openings for Defense Analysts who will
be responsible for the analysis, stability and integrity
of our customers multi-faceted data and telephony
communications systems. The ideal candidate possesses a
combination of analytical, task management, consulting,
and writing skills for comprehensive assessments of
telecommunication interoperability, staffing,
organization, technology, and facilities inside a DoD
environment. Active secret clearance is a plus.
Overview of Responsibilities:
Accountable for the planning, analysis and
coordination of major telecommunications projects while
monitoring, providing maintenance and support for all
communication links.
Understanding of both DoD wired and wireless
communications systems and related networks.
Ability to analysis and evaluate our customers
communication system used for interoperability.
Manage the voice and data network services while
implementing change control and documentation processes.
Serve as resident expert to troubleshoot and solve
complex customer issues that have been escalated
internally.
Support and promote teams, project managers, and
business leaders in our corporate mission, values and
goals.
Ability to work independently and in a fast-paced team
environment with tight deadlines.
Approach assignments with a can do attitude.
Qualifications:
Bachelor Degree or equivalent experience is required,
including at least 10 years experience in military
network/communications/IT systems. Understanding of both
DoD wired and wireless communications systems and
related networks, applications and policies is a must.
Project management experience and PMP certification is a
plus. National Guard experience is a plus. Applicants
must have excellent oral, writing, and interpersonal
skills, and should have experience preferably in the
operational employment, requirements development or
delivery of DoD communications systems/programs is a
strong plus. Proven analytical diagnostic and
troubleshooting skills; strong configuration and
communications skills are required. Candidates should be
self-disciplined, flexible, resourceful, possess
excellent customer service and interpersonal skills.
Ability to travel at least thirty percent of the time is
a must.
Company Name: L. Robert Kimball & Associates
Apply for this Position
|
01/15/2007
Program Manager IV
Job Description -
Coordinate technical and non-technical information flow
between COMPANY and all its subcontractors associated
with the NY Statewide Wireless Program. Specific tasks
include but not limited to:
' Conduct regular scheduled status meetings
' Review and approve subcontractor generated documents
' Coordinate information flow from M/A-COM engineering
to the appropriate subcontractors
' Oversee a wide range of program activities from site
acquisition to site deployment ' statewide.
' Work closely with program master scheduler to ensure
subcontractor schedules are achieved.
Experience -
B.S. in Management or related technical degree. Possess
very good written and verbal communication skills.
Minimum 3 years management experience with large
wireless communications system deployment, knowledge of
tower site construction, ability to converse in
technical and non-technical discussions, experience in
public safety communications a plus.
Special Requirements
Travel throughout the State of NY and occasional travel
outside the US
COMPANY INFORMATION
COMPANY is a world leading developer and manufacturer of
radio frequency (RF) and microwave semiconductors,
components and IP Networks to the wireless
telecommunications and defense-related industries.
COMPANY'S products include semiconductor devices, RF
integrated circuits, passive and control devices,
antennas, subsystems and systems. The commitment of
COMPANY to the wireless market has enabled COMPANY to
strengthen its position as the industry leader.
Company Name:
The Couture Group, Inc
Apply for this Position
|
9/2/2006 Marketing
Manager, Public Safety Market
Collaborate with product groups & field sales on key
major opportunities (RFPs) as lead or consultant; Plan &
execute Consultants Program (5+ seminars / year, monthly
newsletters).
Knowledge of Public Safety markets, via direct
experience in law enforcement, fire, or EMS.
Experience working with both customers, Product
Managers & Engineers.
Contact & influence key industry players in trade
associations or customers.
Able to plan & think both strategically & tactically.
Technical background.
Experience training field sales force.
Experience with long sales cycle markets.
Experienced with Land Mobile Radio (LMR) or IT.
Experienced working with a manufacturer.
Attend numirous Market Team and National Trade shows.
Collaborate on product issues unique to the Public PS
markets.
Participate in key industry trade groups including
APCOs Commercial Advisory Council.
Articulate, excellent listening, writing (position
involves much writing in terms of presentations,
articles, trip reports, etc), verbal, & presentation
skills.
Personable, good at customer contact & discussions.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
|
|
|
9/2/2006 Sr.
RF/Microwave Modular
Subsystem Engineer
Position Summary: Position will be manufacturing support
for thin-film RF/Microwave modular subsystems. Role will
support the product line by resolving technical issues
relating to the testing and tuning of hardware. These
issues must be resolved while maintaining a regular
production flow.
General computing skills and organization will be needed
to document formal changes to hardware by updating
AutoCAD drawings and BOMs.
Position will participate in cost reduction initiatives
such as Six Sigma and Lean. US Citizenship and the
ability to obtain a DOD security clearance is required.
A BS in electrical, mechanical, or a related field and
5+ yrs of applicable experience is required.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
|
8/30/2006
Principal Engineer Software (Broadband)
Position Summary: Software engineer for broadband
product development. Candidate will participate in
testing and development of WiMAX product solutions.
Primary responsibility will be development and exercise
of test programs to validate 802.16 basestation.
Key areas of involvement will be:
Validation of all local and network-wide control
features.
Verification against the IEEE 802.16 standard.
Validation of data integrity.
Characterization of product and network performance.
Verify interoperability with third party WiMAX
products.
Participate in WiMAX certification of products.
Experience Required:
Test plan design and implementation for complex,
multiprocessor products.
Software development in C and C{PLS}{PLS} using object
oriented programming and design techniques.
Development in both Linux and Windows environments.
Identification and selection of test tools and methods
especially for networking products.
Familiarity with network communications and protocols,
especially TCP/IP.
Generating test reports and evaluation of product
readiness.
Use of version control software (Clearcase preferred).
Some experience in assembly language programming may
prove helpful.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
|
8/30/2006 Principal
Design Eng (Input Filter, (pwr))
Requires detailed knowledge and practical application
of:
Filter design, testing, and applications.
ADS design software.
EM simulation software.
Mathematical filter analysis/design software.
Testing/tuning of traditional comb line and DR
filters, Duplexers, and Ttri-plexers.
Design trade-offs.
Passive elements commonly associated with filter
products and their implementation into these products in
a cost effective manner.
The design, implementation, and detailed understanding
of active RF circuit chain analysis and fundamental
design techniques desired, but not required
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
|
8/16/2006 Senior
Antenna/RF Engineer
The Senior Antenna/RF Engineer will be responsible for
defining and designing unique antenna
systems for integration in every Apple product. He/she
will work in a technology group on next
generation wireless communications products and will be
responsible for all antenna designs in
Apple products. He/she will work closely with other
cross-functional engineering groups such as
industrial design, product design, EMC, reliability, and
all of the computer system project teams.
Experience with RF radio design and implementation is
desired. Additionally, the engineer must be
able to interact closely with offshore engineering
development and manufacturing partners.
International and domestic travel is likely.
A qualified candidate must have a BSEE together with
at least 5 to 7 years of relevant
industry experience and be fluent in wireless
communications standards, wireless technology and
communications market trends.
Must be an excellent communicator with a successful
track record of delivering highly
innovative communications products.
Should be well organized and have the ability to be
flexible in a changing work environment.
Company Name: Apple Computer, Inc.
Apply for this Position
|
8/15/2006 Senior
Systems Engineer
The C4IT business unit within SAIC currently has an
opening for a Senior Systems Engineer. JOB DESCRIPTION:
Scope: Candidate will join a team at SPAWAR Systems
Center and will be part of an integrated
government/contractor team working with technical and
functional experts providing system engineering support
to the government. Candidate will develop operational
concepts, system architecture and other engineering
services for software defined radios. Candidate will
assist the team in developing documentation necessary to
achieve acquisition milestones.
REQUIRED EDUCATION/SKILLS: Require a Bachelors degree in
CS, EE or related field and at least 10-15 years related
experience. Advanced degree in related technical field
desired. Solid background in systems engineering of
military communication systems. Must have demonstrated
experience developing system concepts of operations and
architectures. At least 10 years experience with
military radio communication systems. Experience with
wireless waveform protocols and modeling and simulation
is desired. Major system acquisition experience is a
plus
Company Name: SAIC
Apply for this Position
|
8/5/2006
Senior RFIC Design Engineer
Design and layout of RF circuits such as LNAs,
mixers, VCOs, variable gain amplifiers and buffer
amplifiers.
- Working with other members of the engineering team to
develop and test products as required by Marketing
specifications.
- 4+ years development experience in semiconductor
industry, including experience with low phase noise RF
design, and microwave design techniques.
- Familiarity with design, characterization, and
modeling of custom devices and passive elements.
- Experience with on-chip, package and printed circuit
board (PCB) parasitic and design issues.
- Knowledge of common low frequency circuits such as
opamps, operational transconductance amplifiers (OTAs)
and bias circuits.
- Experience developing circuits for wireless standards.
- Experienced in the use and development of high-Q
inductors and varactors.
- Proficient with such tools as Cadence Spectre and
SpectreRF, Virtuoso and Assura; also with Microwave
design tools ADS, Microwave Office of MMICAD.
- Knowledge of RF Testing is desirable.
- Strong communication skills and demonstrated success
in meeting design deadlines.
- A self-starter and team-player, with demonstrated
success in a small company environment
Company Name: Aztec Professional Services
Apply for this Position
|
8/3/2006
Technical Marketing
Primary reasonability will be to increase
revenue by interfacing and managing relationships with
sales force & customers.
Product portfolio centered on low end commercial
wireless products.
Responsible for all marketing activities from concept
to launch, including market requirements documentation,
product requirements documentation, product positioning,
market segmentation strategies, launch plans, pricing
strategies, sales channels and promotional activities.
Collaborate on the development & refine then drive
roadmaps and next generation solutions.
Provide timely solutions that meet customer/market
needs.
Address technical concerns of customers with able to
clearly devise & articulate strong value propositions.
Work well with customers, program management,
engineering, business operations & other business
groups.
Works well with a global team and able to coordinate
activities with regional sales & marketing teams.
Requires domestic and international travel.
All job activities should result in driving up demand
and securing design wins for
wireless connectivity products.
Company Name: ProfessionalEXEC Recruiters
Apply for this Position
|
8/2/2006
Communications Radio Architect
Qualified individual to lead the development of
new and innovative architectures for next generation,
wireless
communication systems for the Joint Armed Services. This
individual will provide technical leadership to
cross-functional teams evaluating alternative
architectures and designs, analyzing cost and
performance tradeoffs, and resolving technical issues.
Company Name: BAE Systems
Apply for this Position
|
7/30/2006
Firmware Engineer - Project Lead
Lead embedded software development for broadband
wireless systems.
Lead, design, implement, debug, test, and maintain
embedded software for broadband wireless systems.
Minimum Requirements:
1. Education: Bachelors of Science in Computer
Engineering or Electrical Engineering.
2. At least 10 years of firmware programming experience
using C for 32 bit microprocessor systems.
3. At least 5 years of firmware programming experience
for Ethernet based network equipments, preferable
routers, wireless LANs or fixed wireless broadband
systems.
4. At least 2 years of project management experience.
5. In depth knowledge of
a. Ethernet
b. TCP/IP Protocols (ARP, ICMP, IP, TCP, UDP, TELNET,
TFTP, FTP, SNMP, HTTP)
Company Name: Trango Broadband Wireless
Apply for this Position
|
7/30/2006
Firmware Engineer
Develop embedded software for point to point and point
to multi-point broadband wireless systems.
Responsibilities:
1) Design, implement, debug, test and maintain point to
point and point to multi-point broadband wireless
systems.
2) Design, implement and maintain debugging tools.
3) Assist software validation engineer to design, code
and maintain scripts/programs to automate test plan.
4) Maintain detailed firmware design notes and
documentation.
5) Interface with marketing and production departments
to define product requirements as they apply to firmware
design.
6) Interface with marketing and documentation control
departments to release new versions of firmware and
associated documentation.
Company Name: Trango Broadband Wireless
Apply for this Position
|
7/30/2006
Wireless IP Product
Manager
1. Develop and support strategies to increase revenue
through:
a. New Product Offerings - identify trends in the market
and work with sales, offer development, engineering and
operations in developing new product offers from concept
to market. This will include product plan, pricing,
marketing and initial sales. Interfaces with
engineering, manufacturing, and sales to develop new
products or enhance existing product(s) or product
line(s).
b. New Market Opportunities: identify markets with
revenue potential to Trango and take steps to tap into
these markets through new sales channels after internal
review and business plan review.
c. Partnering with sales team on specific deals to
analyze the benefit to Trango and the customer and come
up with creative solutions to help win sales.
2. Competitive Analysis: Oversee market research,
monitor competitive activity, and identify customer
needs and pricing strategies
3. Technical Support & training: Oversee and supervise
technical support department. Develop and enhance
training programs.
4. Product Documentation and collateral: Develop and
enhance product documentation and product related web
content and marketing collateral
Company Name: Trango Broadband Wireless
Apply for this Position
|
7/28/2006
Senior Wireless
Network Engineer
* This is a customer facing position.
* Responsible for moderately complex design and
development activities on new and existing wireless
and/or radio frequency (RF) systems, technologies,
equipment, security, and tools.
* Performs moderately complex tests, simulations and
analyses.
* Researches and evaluates new wireless technologies.
* Develops applicable test plans and evaluation/test
reports and presents such to customer's engineering
staff and senior management.
* Operates under general supervision, but must be a self
starter.
* Working knowledge of common protocols and standards
such as TCP/IP, SNMP, 802.11a,b,g, and 802.16. is
mandatory.
* Working knowledge of industry and regulatory standards
such as IEEE, FIPS, FCC, etc. is mandatory.
* Makes recommendations on purchasing new products and
works with vendors.
* Designs complex networks and provides technical
expertise and oversight during implementation phase.
* Develops technical standards and interface
applications.
* Identifies and resolves security risks.
* Presents studies and briefings to customers.
* Participates in preparation of technical proposals.
* Resolves complex network problems.
* Provides guidance to other network analysts.
Company Name: BAE Systems
Apply for this Position
|
7/27/2006
Sr. Components Engineer, RF Devices
Sr. Components Engineer, RF Devices
Description
Global Manufacturing is currently hiring for a Sr.
Components Engineer.
This position will be responsible for developing a
global supply chain for RF devices and assist selection
of RF components for wireless applications (1GHz to
40GHz).
Company Name: NewTech Executive Search
Apply for this Position
|
7/21/2006
Radio Architect
BAE Systems is seeking a highly qualified individual to
lead the development of new and innovative architectures
for next generation, wireless communication systems for
the Joint Armed Services. This individual will provide
technical leadership to cross-functional teams
evaluating alternative architectures and designs,
analyzing cost and performance tradeoffs, and resolving
technical issues.
Applicants selected will be subject to a government
security investigation and must meet the eligibility
requirements for access to classified information.
* B.S. degree in Electrical Engineering, Computer
Engineering or related field (M.S. or PhD preferred)
* Minimum of 10 years relevant industry experience, with
at least 5 years experience developing wireless,
communications systems
* Knowledge of communications systems and networking
concepts and protocols, such as IPv4/IPv6, TCP/UDP, and
IPsec
* Knowledge of RF and digital radio hardware, including
antennas, tuners, analog and digital filters, A/D, D/A,
and frequency converters, combiners, multiplexers,
modems, amplifiers, Digital Signal Processors, CODEC,
INFOSEC and Network Interface Units
* Knowledge of Software Defined Radio technology
* Familiarity with Inter-Processor Communication (IPC),
including CORBA, RPC, SOAP protocols, and PCI/PCI
Express, RapidIO, and Ethernet hardware
* U.S. citizenship and eligibility for Secret security
clearance
Company Name: BAE Systems
Apply for this Position
|
7/14/2006
Network Research Scientist
U.S. Citizenship Required As part of an advanced
networking research team, perform experiment-based
research and development in the area of wireless network
algorithms. Design, develop, analyze, and prototype new
network protocols that address the unique challenges of
mobile ad-hoc communications such as changing topology,
link outages, and quality of service negotiations.
Participate in field experiments of these technologies
to quantify the system improvements. Interact with
leading academic and industry experts in the field.
Required Skills
Proven track record in advancing the state-of-the-art in
link, network, and/or transport layer protocols for
wireless environments. Individual should have strong
analytical skills in control, stochastic analysis, and
network simulation. Hands-on experience with
implementation of novel protocols (or protocol
extensions) within the Unix networking stack is desired.
General knowledge of wireless communications including
MAC algorithms and MANET routing protocols desired.
Individual must work well within a collaborative
laboratory setting and be willing to tackle new research
challenges. Strong written and oral communication skills
are desired. U.S. Citizenship required
Company Name: BAE Systems
Apply for this Position
|
|
6/28/2006 Applications
Engineer
Qualifications:
BS or MS in Electrical Engineering with experience in RF
systems, components, or mixed-signal high-speed ASIC
products. Minimum of 2{PLS} years of experience.
The following traits are highly valued:
Experience with RF building blocks including RF
switches, LNAs, mixers, synthesizers, filters,
amplifiers, power amplifiers.
Understanding of commercial wireless standards
including GSM, CDMA, 3G cellular and 802.11 and/or solid
command of modulation/demodulation techniques
Ability to perform RF measurements including
S-parameters, noise figure, IP3, power compression
Lab automation; Labview, HP Vee, PC controlled test
Understanding of common digital interfacing techniques
CATV, GPS, and Asian language a plus
Ability to analyze customer systems and identify
opportunity for companys products
Strong presentation skills for analyses, datasheets,
and application notes
Company Name: Aztec Professional Services
Apply for this Position
|
5/21/2006 Chief
Engineer for RF Wireless Technology
This person will be responsible for providing technical
leadership internally and externally in the area of
Wireless Network Communication Systems. Specifically,
technical interactions with customers, partners, and
subcontractors, for technical exchange, technical
due-diligence, and business development; and technical
leadership and oversight for product definition and
development. Must have proven record of creating and
delivering product and technology presentations to
industry and customers in formal and informal
environments.
Duties will include participation in product definition
and specification; technical management of design
projects, architectural design of fixed wireless
products, development of communications systems
requirements, link budget analysis, and specification of
antenna, RF sub-system and modem requirements based on
digital-wireless transmission systems requirements and
applications.
Other possible duties include participating in industry
standard committees (such as IEEE), work with regulatory
groups.
Qualification Requirements:
* MS EE/Physics or equivalent experience minimum,
* 15{PLS} years of design and analysis experience
developing RF microwave and millimeter wave products and
sub-systems for high volume commercial applications,
including proficiency with RF circuit design and
simulation tools.
* 10{PLS} years experience in various design and
analysis assignments.
* 10{PLS} years experience in design and analysis of
broadband communications systems - including experience
with QPSK, QAM, VOFDM and other digital modulation
formats is preferred.
* Excellent communication skills
* US Citizen.
Company Name: Benavides Technical Staffing
Apply for this Position
|
5/19/2006 Radio
Network Systems Engineer
Radio Products seeks an experienced engineer to lead the
development of a networking architecture for a
next-generation embedded communications device. Develop
wireless network architectures, design concepts and
functional requirements for small form factor advanced
software definable radio systems supporting multi-mode
(voice, data, multimedia), multi-channel capabilities in
a spread spectrum environment. The candidate will be a
technical contributor who accepts and solves technical
problems and participates in developing various system
level specifications and trade studies. This individual
will collect new requirements, analyze known
requirements and derive requirements to completely
specify the devices networking needs. This engineer will
develop an architecture that meets severe size, weight,
and power constraints, and challenging performance
requirements. This individual will be a core member of a
proposal team which is expected to develop and deliver a
winning response to a Government RFP due mid-2003. This
engineer will begin as Radio Products lead expert in
networking, and will be responsible to build a team as
the need arises. This individual will also help select
and implement a pre-defined networking solution as part
of a planned capability demonstration.
Company Name: General Dynamics Decision Systems
Apply for this Position
|
5/19/2006
IAO/SP Test Engineer Sr Staff
Information Assurance Operations (IAO) - Secure Products
Engineering --World-class secure design organization
with a rich history of developing high-assurance
products for a diverse marketplace including the STU III
and Future Narrowband Digital Terminal (FNBDT)
standards-based, telecommunications equipment. Currently
seeking an experienced engineer to participate in the
development for the next generation of secure
telecommunications products. Position requires a
self-motivated individual with both technical and
leadership qualities, and a desire to work in a
product-oriented environment. Responsibilities include:
Lead a small team of system test personnel to support
adding security functions to an embedded wireless
handset platform. Track/update schedules and procedures.
Review system documentation to identify testable
requirements, define system test cases based on test
requirements, write test procedures, perform system test
and write test report. During the course of reviewing
system requirements, any special test support
equipment/programming will be identified and
requirements generated for Special Test Equipment.
Participate in the peer review process for system,
system test and software work products. Experience in
any of the following areas is highly desirable: software
/ systems test methodology, LabVIEW (programming and
software design for test systems), DOORS (requirements
tool, Clearcase, Framemaker, or Microsoft Office tool
suite.
Company Name: General Dynamics Decision Systems
Apply for this Position
|
5/13/2006 EMBEDDED
SYSTEMS ENGINEER
- 10{PLS} years total experience in system-level
embedded design
- 5{PLS} years total experience in board-level
electronics design
- Strong leadership skills and tact are required
- Must have familiarity with all aspects of the
electronics design and project development cycle
- Must work well under deadline pressure.
- Must be highly organized, driven, self-motivated, and
focused.
- Must be fluent in spoken and written English.
- Market-based customer project experience is preferred
- Project/Team Lead experience a plus
- Knowledge of handheld and wireless device standards a
plus
- Knowledge of embedded system software design a plus
- Ability to define problems, collect data, establish
facts, and draw valid conclusions.
- Ability to interpret an extensive variety of technical
instructions in mathematical or diagram form and deal
with several abstract and concrete constructs and
variables.
- Strong understanding of general software development
techniques and methodologies is preferred.
- Requires 20-40% travel, local and domestic
- Requires frequent typing, reading, and use of the
mouse on computer.
- Requires standing, walking and sitting for extended
periods of time
- Requires frequent communication in person, by
telephone and through written correspondence
Company Name: INHAND ELECTRONICS, INC.
Apply for this Position
|
5/13/2006 Communications
Radio Architect
Qualified individual to lead the development of new and
innovative architectures for next generation, wireless
communication systems for the Joint Armed Services. This
individual will provide technical leadership to
cross-functional teams evaluating alternative
architectures and designs, analyzing cost and
performance tradeoffs, and resolving technical issues.
Applicants selected will be subject to a government
security investigation and must meet the eligibility
requirements for access to classified information.
* BSEE (MSEE preferred) or related discipline. Requires
10 years experience in communication system
requirements, communication system architecture design
and analysis, network design and interface protocols.
* Familiarity with of TDMA, CDMA systems; able to
translate CONOPS into systems requirements and allocate
to subsystem level.
* Knowledge with legacy military communication systems
such as EPLRS, HAVEQUICK, DAMA, SINCGARS is required.
* Willing and able to travel domestically and/or
internationally as required to meet business or customer
objectives.
* Knowledge of RF and digital radio hardware, including
antennas, tuners, analog and digital filters, A/D, D/A,
and frequency converters, combiners, multiplexers,
modems, amplifiers, Digital Signal Processors, CODEC,
INFOSEC and I/O protocols
* Candidates will be subject to a background
investigation and must meet eligibility requirements for
access to classified information. US Citizenship
required.
Company Name: BAE Systems
Apply for this Position
|
5/13/2006
Senior
Wireless Network Engineer
* This is a customer facing position.
* Responsible for moderately complex design and
development activities on new and existing wireless
and/or radio frequency (RF) systems, technologies,
equipment, security, and tools.
* Performs moderately complex tests, simulations and
analyses.
* Researches and evaluates new wireless technologies.
* Develops applicable test plans and evaluation/test
reports and presents such to customer's engineering
staff and senior management.
* Operates under general supervision, but must be a self
starter.
* Working knowledge of common protocols and standards
such as TCP/IP, SNMP, 802.11a,b,g, and 802.16. is
mandatory.
* Working knowledge of industry and regulatory standards
such as IEEE, FIPS, FCC, etc. is mandatory.
* Makes recommendations on purchasing new products and
works with vendors.
* Designs complex networks and provides technical
expertise and oversight during implementation phase.
* Develops technical standards and interface
applications.
* Identifies and resolves security risks.
* Presents studies and briefings to customers.
* Participates in preparation of technical proposals.
* Resolves complex network problems.
* Provides guidance to other network analysts.
Company Name: BAE Systems
Apply for this Position
|
5/10/2006 Wireless
IP Product Manager
Minimum Requirements:
1. 5 or more years in the role of a Product Manager
(with at least 5 direct reports) for a leading IP
hardware manufacturer.
2. CCNE certification or higher.
3. At least 2 years wireless hardware deployment
experience (field operations).
4. At least 2 years experience with public speaking or
presentation of papers.
5. At least 3 years working in the design/development
field to develop IP related operating systems code base,
MIBs and/or GUIs (application layer).
Company Name: Trango Broadband Wireless
Apply for this Position
|
|
mobile jobs, wireless careers, cellular jobs,
wireless work, wireless career, cell jobs, wireless
employment, communications jobs, communications careers,
mobile newspaper, communications career, communications
job, communications employment, cellular work,
communications positions, mobile employment, mobile
careers, cell work, communications newspaper, cellular
job, cell job, cellular careers, cellular career, mobile
job, cell career, mobile career, communications work,
verizon jobs, verizon wireless, cingular jobs, cingular
wireless, broadcom jobs, nextel jobs, at&t jobs, linux
jobs, motorola jobs, internet jobs, nextel wireless,
at&t wireless, optical jobs, dsl jobs, career jobs,
wireless companies, lan jobs, phone jobs, firmware jobs,
wireless routers, cellular wireless, wireless router,
wireless mouse, linux wireless, wireless phones,
wireless plans, cable jobs, broadband jobs, wireless
networking, wireless service, wireless usb, wireless
internet, wireless dsl, networking jobs, driver jobs,
employment jobs, orinoco wireless, wireless security,
wireless phone, wireless cards, wireless broadband,
motorola wireless, careers jobs, security jobs, wireless
modem, wireless card, sales jobs, wireless cable,
network jobs, pcmcia wireless, atheros wireless, wlan
wireless, wireless laptop, broadcom wireless, bluetooth
wireless, wireless setup, wireless network, wireless
linksys, wireless adapter, prism wireless, netgear
wireless, wireless sales, cell wireless, wireless
chipset, recruitment jobs, dlink wireless, wireless
connection, lan wireless, wireless coverage, optical
wireless, wireless configuration, connection jobs,
wireless driver, mobile wireless, wireless pci, wireless
firmware, logitech wireless, jobs companies, card jobs,
jobs work, service jobs, wireless adsl, cards jobs, jobs
positions, jobs vacancies, mobile work, Wireless Jobs,
verizon wireless jobs, cingular wireless jobs, wireless
sales jobs, wireless job, verizon wireless job, jobs at
verizon wireless, jobs wireless, cingular wireless job,
verizon wireless job opportunities, jobs in wireless,
verizon wireless job fair, wireless job fair, jobs for
wireless,
California,Texas,New
York,Florida,Illinois,Pennsylvania,Ohio,Michigan,Georgia,New
Jersey,North
Carolina,Virginia,Massachusetts,Washington,Indiana,Tennessee,Arizona,Missouri,Maryland,Wisconsin,Minnesota,Colorado,Alabama,Louisiana,South
Carolina,Kentucky,Puerto
Rico,Oregon,Oklahoma,Connecticut,Iowa,Mississippi,Arkansas,Kansas,Utah,Nevada,New
Mexico,West Virginia,Nebraska,Idaho,Maine,New
Hampshire,Hawaii,Rhode Island,Montana,Delaware,South
Dakota,Alaska,North Dakota,Vermont,District of
Columbia,Wyoming, USA, The USA, United States, United
States of America, US, Canada, North America
|
Jobs, career, employment, wireless, wireless
communications, wireless technology, wireless waveform
protocols, wireless standards, wireless products,
wireless connectivity products, wireless systems,
wireless LANs, fixed wireless broadband systems,
broadband wireless systems, Wireless Network Engineer,
Wireless Network, wireless applications, wireless
network algorithms, wireless environments, GSM, CDMA, 3G
cellular, 802.11, Wireless Network Communication
Systems, embedded wireless handset platform, wireless
device standards, CCNE, Wireless Jobs , Wireless IP
Product Manager, Wireless Network Engineer, EMBEDDED
SYSTEMS ENGINEER, RF Wireless, Firmware Engineer
|
|
AL, AK, AS, AZ, AR, CA, CO, CT, DE, DC, FM, FL, GA, GU,
HI, ID, IL, IN, IA, KS, KY, LA, ME, MH, MD, MA, MI, MN,
MS, MO, MT, NE, NV, NH, NJ, NM, NY, NC, ND, MP, OH, OK,
OR, PW, PA, PR, RI, SC, SD, TN, TX, UT, VT, VI, VA, WA,
WV, WI, WY |
| 1xRTT
(CDMA), Binary Runtime Environment for Wireless (BREW),
Code-Division Multiple Access (CDMA), Cellular Digital
Packet Data (CDPD), Enhanced Data GSM Environment
(EDGE), Global System for Mobile Communications (GSM),
Local Multipoint Distribution Services (LMDS), Palm
Query Application (PQA), Short Message Service (SMS),
Time Division Multiple Access (TDMA), Universal Mobile
Telecommunications System (UMTS), WCDMA, 3G, Bluetooth,
Extensible Authentication Protocol (EAP),
Frequency-Hopping Spread Spectrum (FHSS), General Packet
Radio Service (GPRS), High Performance Radio Local Area
Network (HiperLAN), Orthogonal Frequency Division
Multiplexing (OFDM), S/key, Shared Wireless Access
Protocol (SWAP), Ultra Wide Band (UWB), Web clipping
application (WCA), Wireless Application Protocol (WAP),
Wired Equivalent Privacy (WEP), Wireless ASP (WASP),
WLAN (LAWN), Wireless Transport Layer Security (WTLS) |
Keywords
wireless network
wireless network management
ad hoc wireless network
wireless network problems
wireless network install
netgear wireless network
wireless network configuration
wireless network connection
troubleshoot wireless network
wireless network troubleshooting
wireless network card
linksys wireless network
security enabled wireless network
secure a wireless network
wireless network software
wireless network design
wireless network cards
wireless network security
best wireless network
setup a wireless network
wireless network bridge
set up a wireless network
wireless network routers
wireless network how to
wireless network at home
wireless network hub
wireless network setup
wireless network router
secure wireless network
wireless wide area network
wireless network adaptor
installing wireless network
how do i set up a wireless network
wireless network adapter
wireless network access point
set up wireless network
wireless network antennas
wireless network faq
securing a wireless network
how to set up a wireless network
setting up a wireless network
extend wireless network
how to set up a wireless home network
wireless network booster
home wireless network
wireless local area network
wireless network printer
unsecured wireless network
setup home wireless network
wireless network equipment
wireless network printing
set up home wireless network
wireless network range
home wireless network security
setting up home wireless network
wireless network repeater
wireless network help
wireless mesh network
wireless network antenna
linksys wireless network adapter
pci wireless network card
how to install wireless network
wireless network finder
wireless network key
wireless network usb
usb wireless network card
wireless network camera
wireless network detector
usb wireless network adapter
wireless network monitor
wireless network tools
belkin wireless usb network adapter
wireless network ieee 802.11 policies
wireless network performance
unified wireless network
embedded systems engineer
how to configure a wireless network
wireless network information
wireless ip product manager
wireless network engineer
laptop wireless network card
wireless networking guide
wireless network diagrams
wireless network distance
wireless computer network
wireless networking security
home wireless networking
access wireless network
dsl wireless network
broadband wireless network
wireless network pc card
wireless jobs
wireless data network
wireless network installation
wireless network engineering
pcmcia wireless network card
mobile wireless network
microsoft wireless network
wireless networking tutorial
linksys usb wireless network adapter
wireless network traffic
wireless network ip
wireless network discovery
wireless network architecture
wireless network authentication
wireless network topology
hidden wireless network
xp wireless network connection
adhoc wireless network
another wireless network utility
wireless network drops
wireless network comparison
xp wireless network setup
wireless network connection icon
wireless network policies
windows xp wireless network connection
wireless network connection status
wireless network connection not connected
wireless network connection is not connected
wireless network disconnects
wireless network not connected
wireless network connection problems
wireless network profile
wireless network not working
preferred wireless network
wireless acquiring network address
enable wireless network
wireless network manager
unable to connect to preferred wireless network
disable wireless network
wireless network connection problem
wireless network icon
wireless network unavailable
xp wireless network
windows 2000 wireless network
Keywords
wireless
wireless router
wireless networks
wireless networking
wifi network
home network
home networking
wireless laptop
networking
wireless security
wireless access point
wireless routers
broadband wireless
wireless pc card
network
wireless installation
wifi
wireless computing
wireless communication
wireless networking equipment
computer networking
network support
network installation
wifi hotspot
cellular networking
Keywords
ad hoc network
wifi problems
wifi troubleshooting
wireless troubleshooting
mobile wireless jobs
wireless laptop security
secure network
hardware network wireless
wireless how to
home networking software
mesh networks
wireless computer
diagram network wireless
home network router
home wireless
secure wifi
internet wireless
mesh network
mesh networking
job
wlan security
network infrastructure
wifi security
jobs networking
jobs
wireless site survey
802.11 b wireless
usb wireless adapter
network ps2 wireless
broadband wireless router
network xp
ccna jobs
network consulting
network connection
jobs it
xp networking
wifi software
network manager
windows networking
wireless connection dropping
|
|
www.defensetalent.com |
|
|
|
|
|